Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Lubes/Cleaners

$24.71
Tri-Flow Foaming Lubricant helps penetrate and protect bearings, chains and cables. - Foaming action helps cling to vertical or horizontal surfaces - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$25.67
Tri-Flow Red Grease is a premium quality, extreme pressure, multi-purpose aluminum complex grease. It features outstanding performance in high temperature applications and is waterproof.
$10.15
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency
$10.99
- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml
$25.00
The Ultimate Wear Reducing lubricant for E-Bikes. Based on our own award winning Synergetic lubricant, the first and only wet lube to record a 0.0% wear block in Zero Friction Cycling lab testing, Synerg-E takes our patent pending Tungsten Tribofilm Technology and blends it into a higher viscosity lubricant optimized for the high torque experienced in E-Bike drivetrains. E-bike chains experience more than 2X the internal pressures of traditional bike chain, and are capable of wearing out expensive drivetrain components like chains, chainrings, and cassettes at more than twice the rate of traditional bicycles. By increasing viscosity and adding Calcium Sulfonate to the mix, Synerg-E gives up roughly 1 watt of pure efficiency to Synergetic, while nearly doubling the oil film strength to ensure the lowest rates of chain and drivetrain wear of any lubricant currently available. As with all SILCA lubricants, Synerg-E uses only the finest, environmentally friendly pure synthetic base oils with additives approved as safe by the EPA and Bureau of Land Management. Synerg-E contains NO PFAS or other Fluorinated chemicals.
$17.00 - $127.00
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub
$11.00 - $43.00
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
$7.00 - $13.00
SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.
$12.00
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
$13.00
SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.
$127.00
- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot
$33.90
- Cleaning oil and all weather oils for Rohloff speedhubs
$46.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings
$12.00
• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service
$106.00
RockShox Dynamic Seal Grease - Recommended for rear shock service
$25.00
RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid
$5.00 - $25.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$13.00
Our Bio-Lube is a lighter lubricant than our Tenacious Oil. Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant. It is environmentally friendly, non-toxic, and completely biodegradable. - Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant - Bio-Lube is a lighter lubricant than our Tenacious Oil - Environmentally friendly, non-toxic, and completely biodegradable
$11.95
- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent
$29.99
Premium All Purpose Bicycle Grease - Ultra smooth premium grease. - Low friction, long service life, superior corrosion protection, and anti-wear protection. - Excellent for most bicycle applications including bearings. A premium, all-purpose, NLGI #2, extreme pressure, lithium complex bicycle grease. Pedro's Grease is excellent for bearing applications, assembly tasks, threads, and component interfaces. Formulated to have an excellent dropping point, superior water resistance, and outstanding structural stability over a wide range of temperatures, Pedro's Grease is the grease of choice for those that demand the best.
$28.95
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.
$17.95
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$9.95
Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.
$19.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
$13.95
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube
$28.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$19.95
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$12.95
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.