Filter By:
Products used by Derik
$26.00
- The Jitsie Race brake pads set the standard when it comes to braking power.
- Metal ceramic sintered pad material.
- Equally powerful in dry and wet conditions.
- Copper backing plate improves pad contact with piston to help reduce pad "knock".
- After extensive testing by the Jitsie team, many riders have found these to out-perform all other Trial Zone pads, including the Hope Pro pads!
- Available to fit Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes, Jitsie Race disc brakes, Magura MT5/MT7 or MT2 brakes and Shimano MT400 brakes.
- Pad retention pin and clip not included.
$36.00
- Excellent value for money rim brake bleed kit.
Kit includes:
- 1 500ml Trialtech rim brake fluid
- 1 60ml syringe
- 2 bleed hoses with barb fittings
$38.00
- The Jitsie snail cams are lightweight, high quality chain tensioners.
- Innovative, asymmetrical shape allows for precise chain tension.
- CNC machined from 7075 T6 aluminum.
- Design based on snail cams used in motorcycle trials with multiple cut outs in the shape to drop as much weight as possible without sacrificing durability and strength.
- Designed and manufactured in Belgium as part of the Jitsie Race range.
- Laser-etched Jitsie logos.
$60.00
- Super lightweight 19" rear rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$62.00
- Lightweight, competition proven front tire from world famous bike trials brand Monty.
- Developed and tested by multiple time World Champions Abel Mustieles and Dani Comas.
- Low block tread design helps save weight.
- Widely spaced tread pattern increases grip and sheds mud better in natural terrain.
- Cut-outs from the central tread blocks reduce weight further as well as improve grip by allowing the blocks to conform to uneven surfaces.
- Thin sidewalls keep weight to a minimum.
- Slow rebound rubber compound improves grip and gives the tire a predictable feel.
- Folding bead reduces unnecessary weight.
- Available in 20 x 2.0" size.
$65.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo.
- Good mix of durability and performance.
- Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance.
- Tire is designed to work in both directions.
- Super sticky lightweight rubber compound ensures maximum grip.
- Low block tread design helps save weight.
- Generous spacing between center and outer knobs helps shed mud.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Wire bead.
- Jitsie logos and product info on tire.
- Available in 19 x 2.6 size.
$70.00
- High performance rear rotor from Jitsie.
- Manufactured from Jitsie's exclusive formulated steel.
- 6 bolt international standard fitting.
- 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts).
- Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads.
- Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors.
- Laser-etched logos.
- Rotor bolts not included.
$130.00
- Jitsie's superlight 116mm disc hub from their race range of components.
- Designed with input from multiple time World Champion Dani Comas.
- Manufactured in Belgium.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water.
- Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight.
- Features a hollow aluminum axle, further reducing weight.
- Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Black or Red anodized finish with Jitsie laser etched logos.
- Supplied with steel bolts and Jitsie's superlight low profile aluminum washers.
- Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam).
- 32h spoke drilling only.
$150.00
- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products.
- Forged from high quality 7050 aluminium alloy.
- Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw.
- Fits all ISIS bottom brackets.
- Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket.
- Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket.
- Multi-stage forging allows a design that is super light yet stiff and strong.
- Tough anodized matt silver finish with a stylish and distinctive black SL logo.
- 32.5mm offset provides plenty of clearance.
- Available in 165mm, 170mm and 175mm lengths.
Page 1 of 1