Skip to main content

Filter By:

Full-Suspension

$8,599.00
Blackthorn C XTR comes equipped for challenging all-mountain terrain. The carbon fiber frame lends the stiffness you need to hold your line. The 140 mm Fox Float X Factory shock and 160 mm Fox Float 36 Factory GRIP2 fork ensure that you can handle just about any feature that's waiting around the next berm. Progressive geometry and our Split Pivot suspension design keep things composed on wicked descents and put you in a position to overcome tough climbs. Our pack-free riding features include a padded tube strap spot, top tube mount, and bottle mount for a lighter load on your back. Shimano's gold-standard XTR 1 x 12 groupset and four-piston brakes make speed modulation as smooth as it gets. All told, we think it's the best all-mountain bike out there—we invite you to see for yourself. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$6,899.00
Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$6,899.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"
$6,899.00
Rustler C XT puts fun first. The lightweight carbon frame, responsive geometry, and 27.5" wheel size keep it nimble for hitting all of your favorite trail features. Split Pivot suspension design means 130 mm of supple yet progressively supportive rear travel that's active enough to provide traction when accelerating, braking, and climbing. Shimano's XT component set is revered around the world and better now than ever, with wide-range 12-speed components for smooth shifting and four-piston brakes to slow you down when necessary. With room for a full-size bottle and a top tube mount for accessories, Rustler might be the best carbon trail bike for a phenomenal day in the woods. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$6,799.00
For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$6,799.00
We designed Spearfish C XT to be the endurance XC bike of your dreams. Its carbon frame wastes no watts and its progressive XC geometry puts you in position to rail descents and sprint up climbs, making it a fun ride even off the racecourse. The Split Pivot suspension design delivers efficient pedaling, predictable braking, and excellent traction, backed by a Fox Float DPS Performance Elite shock with 100 mm of travel and a RockShox SID Ultimate fork good for 120 mm. Spearfish's on-bike cargo features make long days out easier, and the Shimano XT 1 x 12 componentry is a high-performance group that delivers precise shifts mile after mile.
$6,499.99
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 160mm Fork - FOX Nude 5T EVOL, TwinLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$6,499.99
Our Spark ST line of bikes takes a classic Spark 900 vibe and adds suspension components for those aiming to spend a bit more time losing elevation. Now with a custom Float x NUDE from FOX, this short travel trail bike is as capable as ever. KEY FEATURES - Spark ST Carbon HMF Frame - FOX 34 P. Elite Grip2 140mm Fork - FOX FLOAT X Nude, TracLoc, 120mm - SRAM GX Eagle AXS Transmission - Shimano SLX 4 Piston Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Dissector Tires - Syncros Dropper Post and CF Parts
$5,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 910. Why you ask? Well, beyond the fact that it is fast, lightweight and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF Frame - FOX 34 Float P. Elite 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - Shimano XT 12 Speed - Shimano XT 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$5,699.99 $7,599.99 25% Off
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - Ohlins RXF36m.2 Air 160mm - FOX FLOAT X Nude, TracLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires Made to go up the mountain in a hurry, and down the mountain even faster. The all-new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail. Please note that bike specifications are subject to change without prior notice. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. SUPER TRAIL FAMILY SCOTT's Super Trail line is a new, progressive specification of Mountain Bikes and E-MTB's featuring suspension components that favor more adjustability. Bikes in the ST range are tailored more toward the downhill part of the ride. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer.
$5,399.00
Rustler Carbon XT will inspire you to get creative with your trail riding. With 150mm front and 130mm rear suspension travel, playful geometry, and 27.5-inch wheels, you’ll see rocks and roots as playthings rather than obstacles. With a lightweight carbon frame and the pedaling efficiency of the Split Pivot rear suspension system, Rustler can hustle up the trail just as well as it flows down. Shimano’s XT drivetrain makes shifting second nature, while the four-piston brakes bring everything to a halt when summoned. Rediscover your favorite trails with Rustler Carbon XT.
$5,299.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 920. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle AXS 12 Speed - SRAM DB8 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$5,299.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"
$4,999.00
Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$4,999.00
Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,999.00
Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.
$4,899.00
Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$4,699.00
Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$3,599.99 - $4,599.99 $4,599.99 - $4,799.99 Up to 25% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 930. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Rhythm 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - Shimano XT-SLX 12 Speed - Shimano Deore 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$4,499.99
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Rhythm 160mm Fork - FOX Nude 5T EVOL, TwinLoc, 150mm - Shimano XT-SLX 12 Speed - Shimano 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$4,499.99
KEY FEATURES: - Genius Alloy Frame - RockShox Lyrik 160mm - FOX FLOAT X Nude, TracLoc, 150mm - SRAM NX-SX Eagle 12 Speed - SRAM DB8 4 Piston Disc Brakes - Maxxis Foldable Tires Made to go up the mountain in a hurry, and down the mountain even faster. The all-new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail. PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. SUPER TRAIL FAMILY SCOTT's Super Trail line is a new, progressive specification of Mountain Bikes and E-MTB's featuring suspension components that favor more adjustability. Bikes in the ST range are tailored more toward the downhill part of the ride. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer.
$4,400.00 $5,999.99 27% Off
The Genius is a mountain bike that was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano XT 12-speed drivetrain and Syncros components, the Genius 910 is action ready. Any Trail. Any Time. Key Features: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Performance Elite 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT, 12-Speed - Shimano XT 4-piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Foldable Tires - FOX Dropper Post - Syncros Parts
$4,399.00
Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,099.00
Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.
$4,099.00
Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.
$3,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 940. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - RockShox Pike RL3 130mm Fork - RS Deluxe Select RL3, 120mm, TwinLoc - SRAM NX Eagle 12 Speed - Shimano Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$3,799.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''
$3,799.00
Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.
$3,699.00
Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustler's Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimano's SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, it's easier to keep the fun rolling. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$3,499.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 950. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Pike RL3 130mm Fork - RS Deluxe Select RL3, 120mm, TwinLoc - SRAM GX Eagle 12 Speed - Shimano Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
Page 1 of 2 Next page