Filter By:
- Disc Brakes (1)
- Disc Brake Rotors (4)
- Hydraulic Rim Brakes (1)
- Brake Pads (13)
- Brake Clamps (4)
- Brake Boosters (1)
- Brake Levers (2)
- Brake Lever Blades (5)
- Show More Categories
- Brake Parts & Accessories (42)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
Braking
$1.00
- Replacement steel bolt.
- M5 x 25mm size.
- 4mm allen key head.
- Ideal for brake clamp bolts (without brake booster).
- Sold singly.
$1.00
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.00
- Replacement clamp bolt for 2005-2010 Magura HS33 brake levers.
- Made from steel for maximum durability.
- M5 x 18mm
- Sold individually.
$1.00
- Disc brake caliper mounting bolt from Magura.
- Steel construction for maximum durability.
- M6 x 16mm size is ideal for disc brake mounting bolts, but also works for other applications.
- Head fitted for 5mm allen key.
- Pre-applied loctite helps keep bolts secure.
- Sold singly.
$1.50
- Replacement olive/compression ferrule from Magura.
- What you'll need if you want to shorten the brake lines on your hydraulic rim brakes.
- Compatible with all hydraulic rim brakes including Magura, Racing Line, Echo, and others.
- Sold singly.
$2.00
- Compression ferrules from Racing Line
- Made from copper, which makes them slightly softer than Magura olives.
- Recommended for use with Racing Line aluminum compression nuts since they can be compressed with less force and are less likely to damage the softer aluminum fittings.
- Compatible with all Magura and Racing Line brakes.
- 5mm inner diameter
- Sold singly.
$3.00
- Replacement brake line for Hope disc brakes.
- Constructed from durable yet flexible material.
- 5mm external diameter.
- Supplied cut to length in 1 foot increments.
$3.00
- Replacement steel Magura M6 Barb Fitting.
- Compatible with Magura, Racing Line, Trialtech, and Echo brake line.
- Sold singly.
$3.00
- Replacement Magura compression sleeve nut, also known as a shroud nut.
- Allows a standard hose to be fitted to cylinders and levers using a new olive.
- Compatible with pre-2011 Magura levers and all Racing Line levers and Magura slave cylinders.
- Sold singly.
$3.00
- Replacement Magura compression sleeve nut, also known as a shroud nut.
- Allows a standard hose to be fitted to levers using a new olive.
- Compatible with 2014 and newer Magura HS33 levers as well as Magura MT disc brake levers.
- NOT compatible with any pre-2014 Magura levers.
$4.00
- Replacement bleed bolt for 2016 Racing Line levers and brakes.
- TC4 titanium construction.
- M6 thread.
- Fitted for use with Torx T-25 tool.
- Fits 2016 Racing Line levers and slave cylinders only, not compatible with Magura or earlier Racing Line brakes.
- Maximum torque 3Nm.
- Nylon washer not included.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers.
- High quality CNC-machined Cr-moly steel construction.
- Second barb is slightly larger diameter to provide a secure fit and better seal.
- Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses.
- M6 x 1mm thread.
- Tough black finish.
- Sold singly.
$4.50
- Lightweight titanium replacement grub screw/blanking bolt for Racing Line brake levers.
- M6 thread size
- New design features an o-ring on the bottom of the bolt, improving the seal over traditional grub screws.
- Constructed from titanium.
- Available in anodized black, gold or rainbow finish.
- Compatible with Racing Line FL001 and Nano 28 levers only!
- Maximum bolt torque 3Nm!
Please Note: A small amount of grease should be applied to the threads before installation and it is imperative that these are not over-tightened. Doing so can result in the lever leaking!
$4.50
- Lightweight titanium replacement grub screw/blanking bolt for 2005-2010 Magura HS33 levers.
- M6 thread size with tapered end fits Racing Line, Magura, Echo CNC, SL and TR rim brakes.
- Fitted for a 3mm allen key.
- Maximum bolt torque 3Nm!
- Sold individually.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake.
- Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes.
- Available in Large (60ml) or Small (24ml) volume.
- Sold individually.
$6.00
- Replacement set of rotor bolts from Avid/Sram.
- Constructed from durable steel.
- Head fitted for a T25 Torx key.
- Supplied with loctite applied to prevent loosening.
- Sold as a set of 6 for one rotor.
$6.00
- Replacement TPA Bushings from Racing Line.
- Bushings sit on both sides of TPA wheel to hold it in place.
- Fits 2005-2010 Magura HS33 and Racing Line levers.
- Sold as a pair (for one brake).
$6.00
- Replacement superlight titanium Racing Line compression sleeve nut, also known as a shroud nut.
- Compatible with Magura HS33 2005-2010 levers and Magura slave cylinders
- Less than half the weight of standard steel compression nuts.
$6.00
- Quality bleed hose for hydraulic rim brakes.
- M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes.
- Can be used as an inlet or outlet hose.
- Supplied with Trialtech barbed connector fitted to a 23cm long hose.
- Ideal for use with Trialtech bleed syringes.
- Sold individually.
$7.00
- Racing Line grease.
- Specially formulated for use with o-rings on Racing Line brakes.
- Helps keep o-rings on hydraulic rim brakes sealed and lubricated.
- Also works great on bolts and other items requiring grease.
- 3g.
$7.00
- Replacement o-rings for Racing Line levers.
- If your lever is starting to leak, new o-ring seals can often give it new life.
- Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.
$7.00
- Tar is the long-used method of improving rim brake performance without grinding.
- To apply, simply spin your wheel and lightly scrub some tar onto the braking surface.
- Only a small amount is needed for each application.
- Can be used with both smooth and ground rims.
- For use with rim brakes only.
- Block of tar measures approximately 3cm x 3cm x 5mm
- Sold singly
$7.00 - $8.00
- Lightweight replacement titanium pivot bolt for Racing Line levers.
- CNC-machined from titanium.
- Compatible with Racing Line FL001 and Nano 28 levers and Freno levers.
- T25 Torx fitting on both ends resists rounding out better than allen fittings.
- Available in anodized black or gold.
- Maximum torque 2.5Nm!
- Sold individually.
$7.00
- Lightweight replacement titanium M6 barbed fitting from Racing Line.
- Constructed from 6Al-4V titanium alloy.
- Less than half the weight of standard steel barb fittings!
$8.00
- Replacement piston spring for Trialtech brake levers.
- Precision taper wound design for improved function and durability.
- Fits Sport or Carthy brake levers.
- Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech.
- Lightweight, durable material.
- 5mm external diameter.
- Available in Black, Blue, Green, Red, White, Yellow and Clear.
- Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose.
- Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech.
- Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster.
- Fits standard M5 brake clamp bolts.
- Available in anodized black only.
- Supplied as a pair.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes.
- Compatible with all brake clamps that require the traditional Magura cylinder washer.
- Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting.
- Aluminum construction makes the washers more durable than standard plastic washers.
- Anodized gloss black finish.
- Sold as a pair (for one brake).
$10.00
- Replacement brass barrel nut for Hope trials lever blades.
- Features a nylon plug to prevent the reach adjust from unscrewing during use.
- Constructed from brass.
- Compatible with Hope Race and Trial Zone levers.
$11.00
- Replacement TPA pins for 2005-2010 Magura HS33 brakes from Racing Line.
- CNC'd from high quality 6061 T6 aluminum.
- Lighter than original steel HS33 TPA pin.
- Fits 2005-2010 Magura HS33 and Racing Line levers.
- Available in anodized red.
- Sold individually.
Page 1 of 3
Next page