Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Braking

$23.00
- Blue compound brake pad refills for TNN Engineering CNC backings. - Blue compound offers excellent control and modulation rather than just On/Off braking while still displaying awesome locking power. - Excels in all conditions including dry, dusty, wet, and muddy. - Require almost no bedding in time and are much quieter than the LGM compound. - Compatible with TNN backings which have recess dimensions of 18mm x 8mm x 4mm, but may fit other manufacturer's backings with a slight modification. - Supplied with detailed fitting instructions and TNN stickers. - Sold as a pair (two individual pad inserts).
$11.00
- Replacement TPA pins for 2005-2010 Magura HS33 brakes from Racing Line. - CNC'd from high quality 6061 T6 aluminum. - Lighter than original steel HS33 TPA pin. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Available in anodized red. - Sold individually.
$28.00
- Replacement trials disc pads from Hope. - If your pads have become contaminated or just plain worn out, these are what you need for your Hope brakes. - Includes 2 pads and pad retention pin and clip. - Fits Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake. - Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes. - Available in Large (60ml) or Small (24ml) volume. - Sold individually.
$4.50
- Lightweight titanium replacement grub screw/blanking bolt for Racing Line brake levers. - M6 thread size - New design features an o-ring on the bottom of the bolt, improving the seal over traditional grub screws. - Constructed from titanium. - Available in anodized black, gold or rainbow finish. - Compatible with Racing Line FL001 and Nano 28 levers only! - Maximum bolt torque 3Nm! Please Note: A small amount of grease should be applied to the threads before installation and it is imperative that these are not over-tightened. Doing so can result in the lever leaking!
$70.00
- High performance rear rotor from Jitsie. - Manufactured from Jitsie's exclusive formulated steel. - 6 bolt international standard fitting. - 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts). - Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads. - Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors. - Laser-etched logos. - Rotor bolts not included.
$4.00
- Replacement bleed bolt for 2016 Racing Line levers and brakes. - TC4 titanium construction. - M6 thread. - Fitted for use with Torx T-25 tool. - Fits 2016 Racing Line levers and slave cylinders only, not compatible with Magura or earlier Racing Line brakes. - Maximum torque 3Nm. - Nylon washer not included.
$30.00
- Official replacement pads for Magura HS33 brakes. - Tough plastic backing is light and keeps costs down. - Standard black compound is durable and affordable. - 7mm of pad material for good wear life. - Sold as 2 pairs (4 pads).
$11.00
- High quality aluminum replacement TPA wheels for Magura and Racing Line brake levers. - Machined from 6061 T6 aluminum - High quality aluminum construction improves strength and is harder to strip out than original plastic Magura wheels. - Fits 2005-2010 Magura HS33, Echo CNC and SL, and Racing Line levers. - Not supplied with hemispherical plastic bushings. - Available in anodized red
$2.00
- Compression ferrules from Racing Line - Made from copper, which makes them slightly softer than Magura olives. - Recommended for use with Racing Line aluminum compression nuts since they can be compressed with less force and are less likely to damage the softer aluminum fittings. - Compatible with all Magura and Racing Line brakes. - 5mm inner diameter - Sold singly.
$10.00
- Replacement brass barrel nut for Hope trials lever blades. - Features a nylon plug to prevent the reach adjust from unscrewing during use. - Constructed from brass. - Compatible with Hope Race and Trial Zone levers.
$18.00
- High performance CNC rim brake pad refills from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair.
$27.42
- Replacement hydraulic line for Magura rim brakes. - Also fits most other hydraulic rim brakes including Echo, Racing Line, Trialtech. - Not compatible with disc brakes. - Available in 3 meter length (enough for approximately 2 rear brakes including crossover line).
$14.00
- Racing Line has updated their piston design for improved sealing. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Available in 13mm and 14mm sizes. - Includes two O-rings as on the previous design, but two nylon rings have also been added to increase longevity and improve seal. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red
$55.00
- New design Trial Zone rotor based on the popular original version. - Laser cut from a sheet of custom steel for fantastic durability. - Optimized for maximum pad friction at low speeds. - Large braking surface provides instant grip and hold. - Designed specifically for trials use. - Straighter arms than previous version for improved strength and stiffness and to withstand braking forces in both directions. - Compatible with Hope Trial Zone, Tech Trial, and Mono Trial brakes, plus others. - Standard 6-bolt mounting pattern is compatible with nearly all trials hubs. - Supplied with rotor bolts. - Available in 160mm and 180mm.
$15.00 - $16.00
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$30.00
- High performance replacement brake pads for hydraulic rim brakes. - Good braking performance in wet and dry conditions. - Red pad material gives great bite and hold in dry conditions when used in conjunction with a light grind. - For maximum performance in wet weather, use a slightly deeper, harsher grind. - 7.5mm of pad material gives great wear life. - Fitted with tough plastic backings to give great value for money. - Sold as a pair (for one brake).
$24.00
- High quality, 6061 aluminum, CNC machined hose splitter for hydraulic rim brakes. - Helps to prevent damage to vulnerable cross-overs found on standard brakes. - Increases brake efficiency and feel by ensuring even fluid flow to each cylinder. - Uses 3 standard M6 Magura or Trialtech barbed fittings (sold separately) for easy hose connection and replacement. - Available in black anodized finish with stylish Trialtech 'Bashring' laser etched logos. - NOT compatible with most disc brakes and fittings, please contact us if you are unsure on compatibility.
$55.00
- The Jitsie brake clamps are an innovative CNC component from the Belgian manufacturer. - CNC-machined from quality 7075 alloy. - Designed to be used without plastic cylinder washers to improve clamping power and ease of installation. - Clamps feature different heights - 7mm and 9mm. This can be very useful when your frame or fork has very low-profile brake mounts. The clamps can be mounted either side up to adjust how far the cylinders sit above the frame. - Designed and manufactured in Belgium as part of the Jitsie Race range.
$15.00
- An innovative product that helps protect your legs when you hit them on your lever clamps! - Helps lessen the impact of hitting the legs on the lever clamps during riding. - Made of lightweight yet durable material. - Held in place by two velcro straps. - Compatible with all brake levers. - Sold as a pair.
$7.00
- Tar is the long-used method of improving rim brake performance without grinding. - To apply, simply spin your wheel and lightly scrub some tar onto the braking surface. - Only a small amount is needed for each application. - Can be used with both smooth and ground rims. - For use with rim brakes only. - Block of tar measures approximately 3cm x 3cm x 5mm - Sold singly
$7.00 - $8.00
- Lightweight replacement titanium pivot bolt for Racing Line levers. - CNC-machined from titanium. - Compatible with Racing Line FL001 and Nano 28 levers and Freno levers. - T25 Torx fitting on both ends resists rounding out better than allen fittings. - Available in anodized black or gold. - Maximum torque 2.5Nm! - Sold individually.
$24.00
- Brake pad refills of the famous TNN green LGM compound. - Designed for harshly ground rims and wet weather but also performs very well in dry conditions with lighter grinds. - Developed and tweaked with the help of a diverse range of riders (including Lewis Greenhalgh, Stan Shaw and Ali C) to provide awesome braking on all types of ground rims. - Great sound (they're loud) with sharp bite and tremendous hold while still maintaining superb wear life. - Compatible with TNN backings which have recess dimensions of 18mm x 8mm x 4mm, but may fit other manufacturer's backings with a slight modification. - 8mm of pad material provides plenty of wear life. - Supplied with detailed fitting instructions and TNN stickers. - Sold as a pair (two individual pad inserts).
$50.00
- Replacement HS33 slave cylinder from Magura - Ideal if one of your slave cylinders has started leaking, you can just replace it instead of getting a whole new brake. - Also fits Magura HS11, Echo rim brakes, and Racing Line brakes. - Features M6/M8 threaded holes. - Includes a plastic cylinder washer, shroud nut, and olive. - Available in black only, sold individually.
$6.00
- Replacement set of rotor bolts from Avid/Sram. - Constructed from durable steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.
$31.00
- Replacement HS33 brake lever blade from Magura. - Fits 2014 and newer Magura HS33 rim brakes only, will not fit Magura disc brakes. - Longer 4-finger lever provides more power over the standard 2-finger lever. - Supplied with TPA kit. - Available in anodized black only.
$48.00
- The TNN Blue brake pads provide excellent modulation and power. - Developed with World Champion Kenny Belaey. - Blue compound offers excellent control and modulation rather than just ON/OFF braking while still displaying awesome locking power. - Much quieter than the LGM pads. - Excels in all conditions: dry, dusty, wet, and muddy. - Due to these pads' characteristics, they are highly recommended as front pads but are also at home on the rear. - Hand-glued to TNN's trademark CNC backing, which is grit blasted inside the pad cavities, ultrasonic cleaned, glued under pressure and then hand sanded. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - Works well on light, medium or harsh grinds (for wet conditions). - Compatible with all hydraulic rim brake systems on the market including Magura, Echo, and Racing Line. - 8mm of pad material provides plenty of wear life. - Sold as a pair. Please Note: Due to the super stiff characteristics of the metal backings, it is important to set up these pads so that they are completely square with the rim, otherwise they will wear unevenly, leading to decreased brake performance and pad life. Also note: These pads are now chamfered on the ends, which helps to reduce uneven pad wear.
$1.50
- Replacement olive/compression ferrule from Magura. - What you'll need if you want to shorten the brake lines on your hydraulic rim brakes. - Compatible with all hydraulic rim brakes including Magura, Racing Line, Echo, and others. - Sold singly.
$1.00
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.