Filter By:
- Brake Line and Fittings (14)
- Brake Fluid & Service (5)
- Brake Lever Parts (15)
- Other Brake Parts (9)
- Show More Brands
- Show Fewer Brands
Brake Parts & Accessories
$55.00 - $110.00
- Replacement slave cylinders from Racing Line.
- CNC machined from high quality 6061 T6 aluminum.
- Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders.
- Compatible with Magura, Echo, and Racing Line brakes.
- Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride.
- Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version.
- Available in anodized black, sold individually or in pairs.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers.
- High quality CNC-machined Cr-moly steel construction.
- Second barb is slightly larger diameter to provide a secure fit and better seal.
- Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses.
- M6 x 1mm thread.
- Tough black finish.
- Sold singly.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake.
- Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes.
- Available in Large (60ml) or Small (24ml) volume.
- Sold individually.
$6.00
- Quality bleed hose for hydraulic rim brakes.
- M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes.
- Can be used as an inlet or outlet hose.
- Supplied with Trialtech barbed connector fitted to a 23cm long hose.
- Ideal for use with Trialtech bleed syringes.
- Sold individually.
$8.00
- Replacement piston spring for Trialtech brake levers.
- Precision taper wound design for improved function and durability.
- Fits Sport or Carthy brake levers.
- Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech.
- Lightweight, durable material.
- 5mm external diameter.
- Available in Black, Blue, Green, Red, White, Yellow and Clear.
- Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose.
- Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech.
- Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster.
- Fits standard M5 brake clamp bolts.
- Available in anodized black only.
- Supplied as a pair.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes.
- Compatible with all brake clamps that require the traditional Magura cylinder washer.
- Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting.
- Aluminum construction makes the washers more durable than standard plastic washers.
- Anodized gloss black finish.
- Sold as a pair (for one brake).
$15.00
- Replacement brake lever piston for Trialtech rim brake levers.
- Precision injection molded using low water absorbtion plastic.
- Available with Sport or Carthy specification seals.
- Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress.
- Compatible with both Sport and Carthy lever models.
- Sold individually.
$15.00 - $16.00
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes.
- Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit.
- Longer than standard hose helps to prevent kinking and reduced performance during use.
- Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other.
- M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes.
- Sold singly.
Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$24.00
- High quality, 6061 aluminum, CNC machined hose splitter for hydraulic rim brakes.
- Helps to prevent damage to vulnerable cross-overs found on standard brakes.
- Increases brake efficiency and feel by ensuring even fluid flow to each cylinder.
- Uses 3 standard M6 Magura or Trialtech barbed fittings (sold separately) for easy hose connection and replacement.
- Available in black anodized finish with stylish Trialtech 'Bashring' laser etched logos.
- NOT compatible with most disc brakes and fittings, please contact us if you are unsure on compatibility.
$36.00
- Excellent value for money rim brake bleed kit.
Kit includes:
- 1 500ml Trialtech rim brake fluid
- 1 60ml syringe
- 2 bleed hoses with barb fittings
Previous page
Page 2 of 2