Brake Parts & Accessories

- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.

- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake. - Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes. - Available in Large (60ml) or Small (24ml) volume. - Sold individually.

- Quality bleed hose for hydraulic rim brakes. - M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes. - Can be used as an inlet or outlet hose. - Supplied with Trialtech barbed connector fitted to a 23cm long hose. - Ideal for use with Trialtech bleed syringes. - Sold individually.

- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.

- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.

- CNC-machined aerospace grade aluminum booster spacers from Trialtech. - Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster. - Fits standard M5 brake clamp bolts. - Available in anodized black only. - Supplied as a pair.

- High quality replacement aluminum cylinder washers for Magura rim brakes. - Compatible with all brake clamps that require the traditional Magura cylinder washer. - Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting. - Aluminum construction makes the washers more durable than standard plastic washers. - Anodized gloss black finish. - Sold as a pair (for one brake).

- Replacement brake lever piston for Trialtech rim brake levers. - Precision injection molded using low water absorbtion plastic. - Available with Sport or Carthy specification seals. - Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress. - Compatible with both Sport and Carthy lever models. - Sold individually.

- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.

- High quality, 6061 aluminum, CNC machined hose splitter for hydraulic rim brakes. - Helps to prevent damage to vulnerable cross-overs found on standard brakes. - Increases brake efficiency and feel by ensuring even fluid flow to each cylinder. - Uses 3 standard M6 Magura or Trialtech barbed fittings (sold separately) for easy hose connection and replacement. - Available in black anodized finish with stylish Trialtech 'Bashring' laser etched logos. - NOT compatible with most disc brakes and fittings, please contact us if you are unsure on compatibility.

- Excellent value for money rim brake bleed kit. Kit includes: - 1 500ml Trialtech rim brake fluid - 1 60ml syringe - 2 bleed hoses with barb fittings

- Compression ferrules from Racing Line - Made from copper, which makes them slightly softer than Magura olives. - Recommended for use with Racing Line aluminum compression nuts since they can be compressed with less force and are less likely to damage the softer aluminum fittings. - Compatible with all Magura and Racing Line brakes. - 5mm inner diameter - Sold singly.

- Replacement bleed bolt for 2016 Racing Line levers and brakes. - TC4 titanium construction. - M6 thread. - Fitted for use with Torx T-25 tool. - Fits 2016 Racing Line levers and slave cylinders only, not compatible with Magura or earlier Racing Line brakes. - Maximum torque 3Nm. - Nylon washer not included.

- Lightweight titanium replacement grub screw/blanking bolt for Racing Line brake levers. - M6 thread size - New design features an o-ring on the bottom of the bolt, improving the seal over traditional grub screws. - Constructed from titanium. - Available in anodized black, gold or rainbow finish. - Compatible with Racing Line FL001 and Nano 28 levers only! - Maximum bolt torque 3Nm! Please Note: A small amount of grease should be applied to the threads before installation and it is imperative that these are not over-tightened. Doing so can result in the lever leaking!

- Lightweight titanium replacement grub screw/blanking bolt for 2005-2010 Magura HS33 levers. - M6 thread size with tapered end fits Racing Line, Magura, Echo CNC, SL and TR rim brakes. - Fitted for a 3mm allen key. - Maximum bolt torque 3Nm! - Sold individually.

- Replacement TPA Bushings from Racing Line. - Bushings sit on both sides of TPA wheel to hold it in place. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Sold as a pair (for one brake).

- Replacement superlight titanium Racing Line compression sleeve nut, also known as a shroud nut. - Compatible with Magura HS33 2005-2010 levers and Magura slave cylinders - Less than half the weight of standard steel compression nuts.

- Racing Line grease. - Specially formulated for use with o-rings on Racing Line brakes. - Helps keep o-rings on hydraulic rim brakes sealed and lubricated. - Also works great on bolts and other items requiring grease. - 3g.

- Replacement o-rings for Racing Line levers. - If your lever is starting to leak, new o-ring seals can often give it new life. - Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.

- Tar is the long-used method of improving rim brake performance without grinding. - To apply, simply spin your wheel and lightly scrub some tar onto the braking surface. - Only a small amount is needed for each application. - Can be used with both smooth and ground rims. - For use with rim brakes only. - Block of tar measures approximately 3cm x 3cm x 5mm - Sold singly

- Lightweight replacement titanium pivot bolt for Racing Line levers. - CNC-machined from titanium. - Compatible with Racing Line FL001 and Nano 28 levers and Freno levers. - T25 Torx fitting on both ends resists rounding out better than allen fittings. - Available in anodized black or gold. - Maximum torque 2.5Nm! - Sold individually.

- Lightweight replacement titanium M6 barbed fitting from Racing Line. - Constructed from 6Al-4V titanium alloy. - Less than half the weight of standard steel barb fittings!

- Replacement TPA pins for 2005-2010 Magura HS33 brakes from Racing Line. - CNC'd from high quality 6061 T6 aluminum. - Lighter than original steel HS33 TPA pin. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Available in anodized red. - Sold individually.

- High quality aluminum replacement TPA wheels for Magura and Racing Line brake levers. - Machined from 6061 T6 aluminum - High quality aluminum construction improves strength and is harder to strip out than original plastic Magura wheels. - Fits 2005-2010 Magura HS33, Echo CNC and SL, and Racing Line levers. - Not supplied with hemispherical plastic bushings. - Available in anodized red

- High quality replacement pistons for 2005-2010 HS33 brakes from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Includes two O-rings. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red.

- Racing Line has updated their piston design for improved sealing. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Available in 13mm and 14mm sizes. - Includes two O-rings as on the previous design, but two nylon rings have also been added to increase longevity and improve seal. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red

- Replacement slave cylinders from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders. - Compatible with Magura, Echo, and Racing Line brakes. - Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride. - Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version. - Available in anodized black, sold individually or in pairs.

- Replacement clamp bolt for 2005-2010 Magura HS33 brake levers. - Made from steel for maximum durability. - M5 x 18mm - Sold individually.

- Disc brake caliper mounting bolt from Magura. - Steel construction for maximum durability. - M6 x 16mm size is ideal for disc brake mounting bolts, but also works for other applications. - Head fitted for 5mm allen key. - Pre-applied loctite helps keep bolts secure. - Sold singly.

- Replacement olive/compression ferrule from Magura. - What you'll need if you want to shorten the brake lines on your hydraulic rim brakes. - Compatible with all hydraulic rim brakes including Magura, Racing Line, Echo, and others. - Sold singly.