Brake Parts & Accessories
- Replacement slave cylinder from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders. - Compatible with Magura, Echo, and Racing Line brakes. - Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride. - Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version. - Available in anodized black, sold individually.
- Replacement HS33 slave cylinder from Magura - Ideal if one of your slave cylinders has started leaking, you can just replace it instead of getting a whole new brake. - Also fits Magura HS11, Echo rim brakes, and Racing Line brakes. - Features M6/M8 threaded holes. - Includes a plastic cylinder washer, shroud nut, and olive. - Available in black only, sold individually.
- High quality brake bleed kit from Hope Technology. - Comes with detailed step by step bleeding instructions. - Clever design uses a lever specific reservoir bleed cap that the easy bleed fluid cup threads into, eliminating the need to refill the reservoir during the bleed process, allowing you to bleed the brake quicker with less mess. - DOT fluid sold separately. - Kit includes: flexible vent tubing, bleed port fitting, lever specific reservoir cap with rubber seal and mounting screws, easy bleed fluid cup with stopper, and instructions.
- Excellent value for money rim brake bleed kit. Kit includes: - 1 500ml Trialtech rim brake fluid - 1 60ml syringe - 2 bleed hoses with barb fittings
- Official Magura bleed kit for rim and disc brakes. - Ideal service kit for keeping your hydraulic rim brakes in top condition! Kit includes: - 4 ounces of Magura Blood - 2 syringes - 1 bleed tube (can be cut in half to make 2) - 2 olives - 2 small hose inserts - 1 barbed fitting - Instructions. Please Note: Since this kit only includes one barb fitting, we recommend purchasing a second barb fitting separately if you wish to bleed your brake using a syringe at each end to cycle fluid back and forth (generally the most effective method for getting rid of air bubbles).
- Replacement hydraulic line for Magura rim brakes. - Also fits most other hydraulic rim brakes including Echo, Racing Line, Trialtech. - Not compatible with disc brakes. - Available in 3 meter length (enough for approximately 2 rear brakes including crossover line).
- High quality, 6061 aluminum, CNC machined hose splitter for hydraulic rim brakes. - Helps to prevent damage to vulnerable cross-overs found on standard brakes. - Increases brake efficiency and feel by ensuring even fluid flow to each cylinder. - Uses 3 standard M6 Magura or Trialtech barbed fittings (sold separately) for easy hose connection and replacement. - Available in black anodized finish with stylish Trialtech 'Bashring' laser etched logos. - NOT compatible with most disc brakes and fittings, please contact us if you are unsure on compatibility.
- An innovative product that helps protect your legs when you hit them on your lever clamps! - Helps lessen the impact of hitting the legs on the lever clamps during riding. - Made of lightweight yet durable material. - Held in place by two velcro straps. - Compatible with all brake levers. - Sold as a pair.
- Replacement brake lever piston for Trialtech rim brake levers. - Precision injection molded using low water absorbtion plastic. - Available with Sport or Carthy specification seals. - Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress. - Compatible with both Sport and Carthy lever models. - Sold individually.
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$13.00 - $14.00
- Racing Line has updated their piston design for improved sealing. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Available in 13mm and 14mm sizes. - Includes two O-rings as on the previous design, but two nylon rings have also been added to increase longevity and improve seal. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red
- Replacement TPA pins for 2005-2010 Magura HS33 brakes from Racing Line. - CNC'd from high quality 6061 T6 aluminum. - Lighter than original steel HS33 TPA pin. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Available in anodized red. - Sold individually.
- High quality aluminum replacement TPA wheels for Magura and Racing Line brake levers. - Machined from 6061 T6 aluminum - High quality aluminum construction improves strength and is harder to strip out than original plastic Magura wheels. - Fits 2005-2010 Magura HS33, Echo CNC and SL, and Racing Line levers. - Not supplied with hemispherical plastic bushings. - Available in anodized red
- High quality replacement pistons for 2005-2010 HS33 brakes from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Includes two O-rings. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red.
- Replacement brass barrel nut for Hope trials lever blades. - Features a nylon plug to prevent the reach adjust from unscrewing during use. - Constructed from brass. - Compatible with Hope Race and Trial Zone levers.
$7.00 - $8.00
- Lightweight replacement titanium pivot bolt for Racing Line levers. - CNC-machined from titanium. - Compatible with Racing Line FL001 and Nano 28 levers and Freno levers. - T25 Torx fitting on both ends resists rounding out better than allen fittings. - Available in anodized black or gold. - Maximum torque 2.5Nm! - Sold individually.
- High quality replacement aluminum cylinder washers for Magura rim brakes. - Compatible with all brake clamps that require the traditional Magura cylinder washer. - Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting. - Aluminum construction makes the washers more durable than standard plastic washers. - Anodized gloss black finish. - Sold as a pair (for one brake).
- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.
- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.
- CNC-machined aerospace grade aluminum booster spacers from Trialtech. - Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster. - Fits standard M5 brake clamp bolts. - Available in anodized black only. - Supplied as a pair.
- Replacement seal kit for the newest generation Racing Line lever pistons. - If your lever is starting to leak, new o-ring seals can often give it new life. - Includes 2 o-rings and 2 nylon washers. - Sold as a kit for one lever piston. - Available for 13mm and 14mm pistons.
- Replacement o-rings for Racing Line levers. - If your lever is starting to leak, new o-ring seals can often give it new life. - Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.
- Replacement set of rotor bolts from Avid/Sram. - Constructed from durable steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.
Brass hose insert for Hope hydraulic disc brakes.
- Replacement set of rotor bolts from Hope. - Constructed from high quality steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.
- Racing Line grease. - Specially formulated for use with o-rings on Racing Line brakes. - Helps keep o-rings on hydraulic rim brakes sealed and lubricated. - Also works great on bolts and other items requiring grease. - 3g.
- Replacement TPA Bushings from Racing Line. - Bushings sit on both sides of TPA wheel to hold it in place. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Sold as a pair (for one brake).
- Tar is the long-used method of improving rim brake performance without grinding. - To apply, simply spin your wheel and lightly scrub some tar onto the braking surface. - Only a small amount is needed for each application. - Can be used with both smooth and ground rims. - For use with rim brakes only. - Block of tar measures approximately 3cm x 3cm x 5mm - Sold singly
- Lightweight replacement titanium M6 barbed fitting from Racing Line. - Constructed from 6Al-4V titanium alloy. - Less than half the weight of standard steel barb fittings!
- Replacement superlight titanium Racing Line compression sleeve nut, also known as a shroud nut. - Compatible with Magura HS33 2005-2010 levers and Magura slave cylinders - Less than half the weight of standard steel compression nuts.
Page 1 of 2 Next page