Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Drivetrain

$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
$36.00
- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).
$30.00
- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.
$60.00
- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.
$3.00 - $5.00
- Single half link from KMC. - The half link is an outer link that reduces to an inner link, making it half the length of a normal link. - Very useful for getting chain length or gearing just right. - Available to fit 1/8" or 3/32" chains. - Grey finish.
$12.00
- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.
$20.00 $35.00 43% Off
- Bottom bracket cups for Racing Line BB30 cranksets. - Machined from high quality 7075 aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - 1.37" x 24tpi thread fits all threaded bottom bracket shells. - Compatible with Hollowtech 2 style bb tools. - Also compatible with Hashtagg and Try-All BB30 cranksets as well as others. - Available in anodized red. - Sold as a pair.
$38.00
- Lightweight half bashring from Jitsie. - Designed and developed with World Champion Dani Comas. - CNC machined from 7075 T6 aluminum. - Asymmetric width for optimal protection while decreasing weight as much as possible. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Laser etched Jitsie logo.
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
$28.00 - $35.00
- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes. - CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves wear life. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank. - Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down. - Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication. - Compatible with all 1/8" and 3/32" chains.
$200.00
- Superlight splined crankset from Trialtech including freewheel, bashring and 7075 crank bolts. - One of the most cost-effective splined cranksets available. - Compatible with all standard M15 ISIS bottom brackets. - Splined 108.9 freewheel can be removed using standard allen/hex key multi tool. No more fooling with vices and pry bars trying to get stuck freewheels off! - Splined 7075 bashring can be set up for left or right foot forward riders and is always held at the correct angle by the splines. - Multi-stage forging allows a design that is super light yet stiff and strong. - Trialtech splined freewheel provides 108 engagement points per revolution with a proven 9 pawl design. - 32.5mm offset provides plenty of clearance. - Tough sandblast black anodized finish with distinctive Sport Lite laser logos. - Additional crank bolt spacers recommended when using titanium bottom brackets. - Available in 165mm, 170mm and 175mm lengths. - Full crankset includes crank arms, freewheel, freewheel lockring, half bashring, and M15 crank bolts.
$60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
$150.00
- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products. - Forged from high quality 7050 aluminium alloy. - Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw. - Fits all ISIS bottom brackets. - Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket. - Multi-stage forging allows a design that is super light yet stiff and strong. - Tough anodized matt silver finish with a stylish and distinctive black SL logo. - 32.5mm offset provides plenty of clearance. - Available in 165mm, 170mm and 175mm lengths.
$22.00
- Lightweight aluminum crank bolts as found on Echo complete bikes. - Manufactured from high quality 7075 T6 aluminum. - Supplied with steel spacers. - Fitted for an 8mm allen key. - M15 thread fits most modern ISIS bottom brackets. - Anodized finish with laser-etched Echo logos. Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones. Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.
$12.00
- Replacement crank pre-load bolt to fit Inspired Flow Plus cranksets. - High quality aluminum construction. - Fitted for a 6mm allen key. - To be snugged lightly in place before tightening the crank arm pinch bolts. Do not over tighten. - Anodized black finish. - Sold individually.
$46.00
- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.
$46.00
- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.
$20.00
- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano FC16 crank arm installation tool. - To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten. - Anodized red finish.
$66.00
- Superlight titanium pedal axles from Trialtech. - Lightweight replacement axles for Trialtech Sport Lite caged pedals. - Precision CNC machined from 6AI-4V titanium. - Includes dust seals and axle nuts. - Sold as a pair. - Laser etched Trialtech logos. - Also fit Hashtagg, Jitsie, Try-All, Clean and other caged pedals.
$42.00
- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
$35.00
- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.
$22.00
- Singlespeed chain used by many trials riders. - Spec'd on many complete trials bikes such as Inspired bikes. - The successor to the very popular Z610 HX chain. - "Stretch Proof" design helps prevent stretch in the plates, meaning chain adjustments are needed less frequently, especially when the chain is new. - Relatively light weight but still quite durable. - Features mushroom pin rivets to eliminate splayed links. - Also supplied with a re-usable master link that allows for easy installation and removal. - 1/2" x 3/32" - 112 links.
$35.00
- Replacement high quality, CNC-machined aluminum tensioner mount from Inspired. - Fits 2014 and newer Inspired Fourplay frames and Inspired Skye V3 frames only. - Includes fixing bolts. - Available in black only.
$350.00
- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - 170 and 175 lengths supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring (170 & 175 lengths only). Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty. Also note: Some cranksets now feature black anodized parts instead of the red shown in the photos.
$40.00 - $45.00
- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.
$40.00
- Bottom bracket cups for Crewkerz AS30 cranksets. - Machined from high quality aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - Pressfit 30 cups fit frames with a 46mm internal diameter pressfit bottom bracket shell such as Crewkerz and Clean. - Available in anodized black. - Sold as a pair of cups (one bottom bracket).
$115.00
- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized black finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.
$28.00 - $30.00
- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.
Page 1 of 2 Next page