Drivetrain

- Replacement steel crank bolts from TruVativ. - Fitted for an 8mm allen key. - Includes steel washers. - Available in M12 and M15 sizes. - Sold as a pair.

- 10mm chain tugs from Trialtech. - Fits most 20" mod bikes and some 26" bikes. - CNC machined aluminum construction, with M6 threaded bar to keep weight down while maintaining maximum functionality. - Guides on the main body prevent the tug from rotating when tightening the axle bolts. - Sold as a pair.

- Replacement bearing to fit Spanish bottom brackets only. - Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others. - High quality construction with double seals. - For use on the drive or non-drive side. - Sold singly. - OD:37mm, ID:22mm, Width:9mm

- High quality, CNC machined cromoly snail cam from Trialtech. - Gloss nickel, hard coated finish for extra durability. - A series of incrementally smaller drilled holes are designed to reduce weight without compromising strength. - Notched design to hold your wheel in position and ensure that it doesn't move, designed to be a 'fit-and-forget' product. - High resolution tooth pattern provides fine chain adjustment. - Will fit most bikes with a 10mm axle designed to work with snail cam tensioners. - Sold individually to allow you to tailor your setup to your specific needs.

- Lightweight and extremely minimal single speed spacer kit from Trialtech. - Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm. - Great for single speed conversions or fine tuning your chainline. - CNC machined from high grade aluminum alloy, then anodized to prevent corrosion. - Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers. - Cassette lockring sold separately.

- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.

- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes. - CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves wear life. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank. - Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down. - Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication. - Compatible with all 1/8" and 3/32" chains.

- Light sprung chain tensioner from Trialtech. - Single speed specific chain tensioner. - Constructed from high grade aluminum alloy, spring steel and chromed steel. - Multi coil spring to prevent loss of tension over time, a common problem with other tensioners. - Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures compatibility with most setups. - Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products. - The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms. - The model with hanger mount fits all frames with a standard derailleur hanger. - Gloss black anodized finish.

- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).

- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).

- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).

- A bashring for threaded cranks on street trials bikes from Trialtech. - CNC machined, high quality 7075-T6 aluminum alloy bashring. - Specifically designed to work on modern street trials bikes. - 22T size, to fit threaded cranks. - 5mm plain cross section gives excellent strength whilst the unique CNC machined pockets remove weight in key areas. - Available in anodized black with Trialtech laser etched logo.

- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.

- Custom designed sprung chain tensioner as fitted to Inspired Team bikes. - Developed and proven by Inspired Team riders. - Constructed from high grade 7075 and 6061 aluminum alloy. - High tension coil spring provides excellent chain tension. - Single sided cage saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise and low drag. - Slim, integrated design helps reduce the chance of damage during riding. - Extended cage improves ergonomics and further aids chain removal. - Fits directly onto Skye V3/V3.5, Fourplay/Hex (2014-onwards) and Link (2023-onwards) frames. - Satin black anodized finish. - 16t (Fourplay, Skye, Link) or 18t (Hex) compatible versions available. - Includes frame fixture bolts.

- Superlight titanium pedal axles from Trialtech. - Lightweight replacement axles for Trialtech Sport Lite caged pedals. - Precision CNC machined from 6AI-4V titanium. - Includes dust seals and axle nuts. - Sold as a pair. - Laser etched Trialtech logos. - Also fit Hashtagg, Jitsie, Try-All, Clean and other caged pedals.

- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.

- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.

- The Trialtech Sport Lite is a light, high quality ISIS bottom bracket. - Tested and developed over a period of more than a year to ensure maximum reliability. - High quality manufacturing with excellent tolerances and finishing quality. - Minimalist aluminum alloy cups and center sleeve help reduce weight. - Unique, high load bearing units for increased strength and durability. - Multiple seals keep out dirt and grit. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 'Top Hat' axle spacers maintain correct bearing preload and crank fitment, plus they can be removed easily to ensure that all types of 20-tooth Shimano BB tool can be used with this BB. - 68mm shell width with 128mm long axle. - Includes color-matched black crank bolts. - Anodized black finish with laser etched Trialtech logo. Please Note: When fitting axle spacers, the wide end must face outwards away from the frame as shown in the pictures. Incorrect fitting of the spacers will void the warranty.

- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products. - Forged from high quality 7050 aluminium alloy. - Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw. - Fits all ISIS bottom brackets. - Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket. - Multi-stage forging allows a design that is super light yet stiff and strong. - Tough anodized matt silver finish with a stylish and distinctive black SL logo. - 32.5mm offset provides plenty of clearance. - Available in 165mm, 170mm and 175mm lengths.

- Superlight splined crankset from Trialtech including freewheel, bashring and 7075 crank bolts. - One of the most cost-effective splined cranksets available. - Compatible with all standard M15 ISIS bottom brackets. - Splined 108.9 freewheel can be removed using standard allen/hex key multi tool. No more fooling with vices and pry bars trying to get stuck freewheels off! - Splined 7075 bashring can be set up for left or right foot forward riders and is always held at the correct angle by the splines. - Multi-stage forging allows a design that is super light yet stiff and strong. - Trialtech splined freewheel provides 108 engagement points per revolution with a proven 9 pawl design. - 32.5mm offset provides plenty of clearance. - Tough sandblast black anodized finish with distinctive Sport Lite laser logos. - Additional crank bolt spacers recommended when using titanium bottom brackets. - Available in 165mm, 170mm and 175mm lengths. - Full crankset includes crank arms, freewheel, freewheel lockring, half bashring, and M15 crank bolts.

- Bottom bracket cups for Racing Line BB30 cranksets. - Machined from high quality 7075 aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - 1.37" x 24tpi thread fits all threaded bottom bracket shells. - Compatible with Hollowtech 2 style bb tools. - Also compatible with Hashtagg and Try-All BB30 cranksets as well as others. - Available in anodized red. - Sold as a pair.

- Replacement master link for KMC singlespeed chains. - Allows the chain to be conveniently removed without a chain tool. - Includes connecting link and retaining clip. - Available in 3/32" (silver) and 1/8" (grey) sizes.

- Single half link from KMC. - The half link is an outer link that reduces to an inner link, making it half the length of a normal link. - Very useful for getting chain length or gearing just right. - Available to fit 1/8" or 3/32" chains. - Grey finish.

- Singlespeed chain used by many trials riders. - Spec'd on many complete trials bikes such as Inspired bikes. - The successor to the very popular Z610 HX chain. - "Stretch Proof" design helps prevent stretch in the plates, meaning chain adjustments are needed less frequently, especially when the chain is new. - Relatively light weight but still quite durable. - Features mushroom pin rivets to eliminate splayed links. - Also supplied with a re-usable master link that allows for easy installation and removal. - 1/2" x 3/32" - 112 links.

- Replacement pedal cage for Jitsie Single Cage pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - Available in anodized black only. - Sold as a pair.

- Affordable and durable steel threaded cogs from Jitsie. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide base gives a strong connection between the sprocket and hub/crank. - Made from heat-treated steel - Compatible with all 1/8" and 3/32" chains. - 12t-14t are offset, 15t is centered.

- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.

- Lightweight half bashring from Jitsie. - Designed and developed with World Champion Dani Comas. - CNC machined from 7075 T6 aluminum. - Asymmetric width for optimal protection while decreasing weight as much as possible. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Laser etched Jitsie logo.

- The Jitsie snail cams are lightweight, high quality chain tensioners. - Innovative, asymmetrical shape allows for precise chain tension. - CNC machined from 7075 T6 aluminum. - Design based on snail cams used in motorcycle trials with multiple cut outs in the shape to drop as much weight as possible without sacrificing durability and strength. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Laser-etched Jitsie logos.

- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.