Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Drivetrain

Crewkerz AS30 Crankset
$315.00
- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - 170 and 175 lengths supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring (170 & 175 lengths only). Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty.
Trialtech Sport Lite Splined Crankset
$200.00
- Superlight splined crankset from Trialtech including freewheel, bashring and 7075 crank bolts. - One of the most cost-effective splined cranksets available. - Compatible with all standard M15 ISIS bottom brackets. - Splined 108.9 freewheel can be removed using standard allen/hex key multi tool. No more fooling with vices and pry bars trying to get stuck freewheels off! - Splined 7075 bashring can be set up for left or right foot forward riders and is always held at the correct angle by the splines. - Multi-stage forging allows a design that is super light yet stiff and strong. - Trialtech splined freewheel provides 108 engagement points per revolution with a proven 9 pawl design. - 32.5mm offset provides plenty of clearance. - Tough sandblast black anodized finish with distinctive Sport Lite laser logos. - Additional crank bolt spacers recommended when using titanium bottom brackets. - Available in 165mm, 170mm and 175mm lengths. - Full crankset includes crank arms, freewheel, freewheel lockring, half bashring, and M15 crank bolts.
Echo SL Titanium Splined Freewheel
$160.00
- One of the lightest freewheels on the market now in a splined version! - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Outer ring and internals constructed from tough CroMo steel for maximum durability. - Base and cap made from titanium to reduce weight to a minimum. - Unique spring design provides reliable engagement and gives it a loud sound. - Featuring Echo's new splined crank/fw interface. The fw simply slides onto the splines on the crank and is held in place by a flared bb spacer (included with cranks). No more hassle trying to remove stuck threaded fws! - Compatible only with Echo splined cranks. - Available in 18t only.
Trialtech SL Forged ISIS Cranks
$150.00
- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products. - Forged from high quality 7050 aluminium alloy. - Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw. - Fits all ISIS bottom brackets. - Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket. - Multi-stage forging allows a design that is super light yet stiff and strong. - Tough anodized matt silver finish with a stylish and distinctive black SL logo. - 32.5mm offset provides plenty of clearance. - Available in 165mm, 170mm and 175mm lengths.
Echo SL Caged Pedals
$116.00 - $125.00
- Echo's tried and true caged pedals with lightweight titanium axles! - Single cage design is lighter and grippier than traditional double cage pedals. - Super slim cage profile provides more clearance over obstacles. - Pedal body is forged from 6061 aluminum while the axle is made from titanium. - Cages are made from 7075 T6 aluminum making them tough and durable. - Cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Wider cage (front to rear) than many other caged pedals, making them great for riders with larger feet while still offering superior grip and stability for any size feet. - Sealed cartridge bearings improve durability and run smoothly. - Cage bolts are also titanium, providing further weight savings. - Black pedal body and anodized cages in a variety of colors.
Inspired Flow Plus Crankset
$125.00
- Replacement crankset from Inspired as found on their Flow Plus 24" bikes. - 2 piece cranks forged from high quality 6061 aluminum alloy. - Tough 24mm steel axle. - Fitted with a 6mm thick alloy bashring. - Includes steel 22t 4-bolt 64mm chainring. - Tough anodized matt black finish. - Available in 170mm length with 22T chainring. Please Note: Failure to keep your pedals tight is likely to invalidate the warranty on these cranks.
Jitsie Race 135.9 Freewheel
$120.00
- The Jitsie Race 135.9 freewheel as found on their top end Race bikes. - 9 steel pawls mounted in groups of 3 with a 45 tooth ratchet ring result in 135 clicks for super fast pedaling response. - Forged steel construction offers great durability. - High quality sealed bearings for improved durability and protection from dirt and grit. - Unique design allows the bearings to be held in place using an external circlip. - Features BB-style removal tabs that allow the freewheel to be removed with a Shimano-style 20 spline bottom bracket tool. - Standard 1.37" x 24tpi thread. - Available in 18t with black finish only. Please Note: This freewheel may require a small spacer to work properly with some bashrings. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Crewkerz Splined 135.9 Freewheel
$105.00
- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized red finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.
Echo TR Splined Cranks
$99.00
The Echo splined cranks are great for those looking for a tough, robust cranks that wont slip. Bare in mind that Echo use their own spline system so parts from other brands won't work. - Echo's popular TR ISIS cranks in a splined version. - Forged from 6061 T6 aluminum making them strong and stiff. - Large slot machined into the front of the cranks reduces weight. - Splined crank/freewheel interface allows for easy installation and removal of freewheels. No more fussing with huge pry-bars to remove stuck threaded freewheels! - Designed to work with Echo style pressfit bottom brackets. - Special "top hat" bb spacers (supplied with bb or sold separately) keep the freewheel secured on the splines. - A freewheel spacer is supplied in case you want to run them without a bashring. - If a bashring is used, it must have a base width of 4mm. - Compatible only with Echo splined freewheels. - Available in 160mm and 170mm. - Anodized black with laser-etched Echo logos. Please Note: The Echo splined crank/freewheel system is only compatible with Echo style pressfit ISIS bottom brackets found on Echo, Zoo, Czar, and GU frames as well as others.
Inspired Arcade V2 Integrated Bashring
$99.00
- Unqiue custom designed bashring with integrated chainring from Inspired. - As found on the Inspired Arcade complete bikes. - CNC machined from high strength 7075 aluminum. - 1-piece design helps to reduce weight and maximize stiffness. - Unique tapered 'top hat' inserts ensure the sprocket remains tight during use and help to improve alignment. - Fits 19mm or 22mm BB axles using the different inserts supplied. - Compatible with most BMX style crank arms with micro sprocket bolt mount (NOT compatible with threaded cranks, or cranks designed for use with bolt-on chainrings). - 22t chainring fits 1/8" and 3/32" chains. - Tough, satin black anodized finish with laser Inspired logo.
Crewkerz Splined 108 Freewheel
$90.00
- Splined freewheel from Crewkerz as found on their complete bikes. - Uses 9 steel pawls with a 36t ratchet to create 108 engagement points for super quick pedaling response. - Constructed from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel its distinctive loud sound. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Available with black finish in 18t only.
Inspired Team V2 Pedals
$90.00
- Inspired's updated high quality platform pedals as spec'd on their high end bikes. - Development of the proven Team platform pedals as used by Danny MacAskill. - Custom CNC machined 6061 main body. - Ultra low profile shape gives great ground clearance, while the foot hugging concave body with screw-in replaceable pins stick to your feet. - Chamfered edges help to minimize weight and deflect impacts. - Strong Cro-moly axle with smooth DU bush and sealed bearing system keep dirt out. - 8mm allen key fitting in the back of the axle for easy installation and removal. - Available in anodized Black with stylish Inspired laser etched logos. - Supplied boxed with Inspired stickers enclosed.
Trialtech 16t Freewheel
$65.00 - $90.00
- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Jitsie 108.9 Freewheel
$85.00
- The Jitsie 108.9 freewheel is a high quality freewheel with 108 engagement points. - Forged steel construction offers great durability. - 9 steel pawls mounted in groups of 3 with 36 teeth result in 108 clicks. - Silver finish with black inner plate displaying Jitsie logo and product details. - Features stronger springs than other similar freewheels which provides more positive engagement, a louder sound and reduced bedding in time. - Four recesses in the main body allow nearly all 4-prong freewheel tools to be used. - Standard 1.37" x 24tpi thread. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Trialtech Splined 18t Freewheel
$85.00
- 18t splined freewheel from Trialtech. - Shimano HG spline mounting pattern is suitable for use only with the Trialtech Sport Lite Splined Crankset. - Strong heat treated steel pawls engage into a tough steel ratchet to provide durable operation. - 108 engagement points per revolution with a proven 9 pawl design. - Black finish with laser etched Trialtech logos. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Jitsie Platform Pedals
$80.00
- Platform pedals from Belgian brand Jitsie. - CNC machined from durable 6061-T6 aluminum. - Slight concave pedal body shape provides maximum foot/pedal contact. - 20 steel pins per pedal ensure optimal grip and confidence. - Strong, reliable steel axle with 6mm allen key fitting in the back and 15mm wrench flats for easy installation and removal. - Sealed bearings for superior durability and smooth running. - Low profile shape gives great ground clearance. - Chamfered edges help to minimize weight and deflect impacts. - Available in anodized black with laser-etched Jitsie logos. - Supplied with spare pins.
Trialtech Sport Lite ISIS Bottom Bracket
$80.00
- The Trialtech Sport Lite is a light, high quality ISIS bottom bracket. - Tested and developed over a period of more than a year to ensure maximum reliability. - High quality manufacturing with excellent tolerances and finishing quality. - Minimalist aluminum alloy cups and center sleeve help reduce weight. - Unique, high load bearing units for increased strength and durability. - Multiple seals keep out dirt and grit. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 'Top Hat' axle spacers maintain correct bearing preload and crank fitment, plus they can be removed easily to ensure that all types of 20-tooth Shimano BB tool can be used with this BB. - 68mm shell width with 128mm long axle. - Includes color-matched black crank bolts. - Anodized black finish with laser etched Trialtech logo. Please Note: When fitting axle spacers, the wide end must face outwards away from the frame as shown in the pictures. Incorrect fitting of the spacers will void the warranty.
Echo TR Splined Freewheel
$78.00
- The Echo TR splined freewheel is reliable and easy to install and remove. - One of the most popular and maintenance-free freewheels on the market now in a splined version! - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Constructed from tough CroMo steel for maximum durability. - Unique spring design provides reliable engagement and gives it a loud sound. - Featuring Echo's new splined crank/fw interface. The fw simply slides onto the splines on the crank and is held in place by a flared bb spacer (included with cranks). No more hassle trying to remove stuck threaded fws! - Compatible only with Echo splined cranks. - Available in 18t only.
Echo TR Platform Pedals
$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
Trialtech Sport Press-Fit ISIS Bottom Bracket
$70.00
- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.
TruVativ Howitzer XR Bottom Bracket
$70.00
TruVativ's Howitzer XR Bottom Bracket is built tough for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.
Jitsie 72.6 Freewheel
$65.00
- The Jitsie 72.6 freewheel is a great quality, affordable freewheel. - Forged steel construction offers great durability. - 6 steel pawls mounted in groups of 3 with 36 teeth result in 72 engagement points. - Black finish with black inner plate displaying logo and product details. - Standard 1.37" x 24tpi thread to fit all threaded trials cranks or hubs. - Available in 18t only. Please Note: These now feature Jitsie logos instead of Tr1al.
Jitsie Forged Cranks
$65.00
- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.
Inspired 4-Bolt Bashring
$60.00
- Updated version of the popular Inspired 4-Bolt Bashring. - CNC machined from top quality 7075 aluminium. - Designed to work with chainrings up to 24T (OD= 124mm), 104mm BCD, 4-bolt cranks. - 6mm outer section gives excellent strength whilst the unique CNC machining removes weight in key areas. - Styled to complement other Inspired parts available. - Available in anodized black only with stylish Inspired laser etched logos.
Jitsie Full Bashring
$60.00
- Lightweight full bashring from Jitsie. - As found on their Varial Hybrid bike. - CNC machined from super strong 7075 T6 aluminum. - Asymmetric design provides full protection while reducing unnecessary material where it isn't needed. - Machined cutout further reduces weight. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Black anodized finish with laser etched Jitsie logos.
Jitsie Single Cage Pedals
$50.00 - $60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
Trialtech Race Forged Cranks
$60.00
- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.
Echo 4-Bolt Bashplate
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
Trialtech Sport 22t Bashring
$55.00
- A bashring for threaded cranks on street trials bikes from Trialtech. - CNC machined, high quality 7075-T6 aluminum alloy bashring. - Specifically designed to work on modern street trials bikes. - 22T size, to fit threaded cranks. - 5mm plain cross section gives excellent strength whilst the unique CNC machined pockets remove weight in key areas. - Available in anodized black with Trialtech laser etched logo.
Crewkerz Chain Tensioner
$50.00
- Sprung tensioner from Crewkerz. - Fits Crewkerz Cleep and Jealousy frames and Clean frames only. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body constructed from high grade 6061 T6 aluminum alloy. - Durable steel spring keeps the chain tight. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures an accurate setup. - Gloss black anodized finish.
Page 1 of 3 Next page