Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Drivetrain

Jitsie Aluminum/Steel Snail Cams
$25.00
- Steel and aluminum snail cam combo from Jitsie. - As found on Jitsie Varial bikes. - One steel and one aluminum snail cam provide the best of both worlds: strength where it is needed and low weight where there is less stress. - Innovative, asymmetrical shape allows for precise chain tension. - Non-drive side snail cam CNC machined from high quality aluminum to keep weight to a minimum. - Steel drive-side snail cam provides maximum durability and strength on the side of the wheel that sees more force. - Available in black/silver only. - Sold as a pair.
Jitsie Pedal Cages
$26.00
- Replacement pedal cage for Jitsie Single Cage pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - Available in anodized black only. - Sold as a pair.
Jitsie 108.9 Freewheel
$92.00
- The Jitsie 108.9 freewheel is a high quality freewheel with 108 engagement points. - Forged steel construction offers great durability. - 9 steel pawls mounted in groups of 3 with 36 teeth result in 108 clicks. - Silver finish with black inner plate displaying Jitsie logo and product details. - Features stronger springs than other similar freewheels which provides more positive engagement, a louder sound and reduced bedding in time. - Four recesses in the main body allow nearly all 4-prong freewheel tools to be used. - Standard 1.37" x 24tpi thread. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Inspired Team V2 Pedals
$90.00
- Inspired's updated high quality platform pedals as spec'd on their high end bikes. - Development of the proven Team platform pedals as used by Danny MacAskill. - Custom CNC machined 6061 main body. - Ultra low profile shape gives great ground clearance, while the foot hugging concave body with screw-in replaceable pins stick to your feet. - Chamfered edges help to minimize weight and deflect impacts. - Strong Cro-moly axle with smooth DU bush and sealed bearing system keep dirt out. - 8mm allen key fitting in the back of the axle for easy installation and removal. - Available in anodized Black with stylish Inspired laser etched logos. - Supplied boxed with Inspired stickers enclosed.
Echo TR Splined Freewheel
$78.00
- The Echo TR splined freewheel is reliable and easy to install and remove. - One of the most popular and maintenance-free freewheels on the market now in a splined version! - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Constructed from tough CroMo steel for maximum durability. - Unique spring design provides reliable engagement and gives it a loud sound. - Featuring Echo's new splined crank/fw interface. The fw simply slides onto the splines on the crank and is held in place by a flared bb spacer (included with cranks). No more hassle trying to remove stuck threaded fws! - Compatible only with Echo splined cranks. - Available in 18t only.
Crewkerz Tensioner Spring
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.
Trialtech Tensioner Spring
$11.00
- Replacement spring for the Trialtech Single Sided Tensioner. - Extra strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - May also fit other sprung tensioners. - Sold singly.
Inspired Arcade Bottom Bracket
$50.00
- External bearing threaded Euro style bottom bracket as found on Inspired Arcade bikes. - Fits 68mm shell frames. - Designed for 2-piece/3-piece BMX style cranks with 22mm axles. - 22mm version is only compatible with Arcade V2 Crankset. - 7075 aluminum BB cups for maximum durability. - Kit includes: 2 x external bearing cups, 1 x internal bearing spacer (71mm), 2 x top hat spacers (5.5mm), 1 x alloy crank arm spacer (5mm), 2 x steel crank arm spacers (1.5mm).
Echo 4-Bolt Bashplate
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
KMC Z1eHX Narrow Chain
$20.00
- Singlespeed chain used by many trials riders. - Spec'd on many complete trials bikes such as Inspired bikes. - The successor to the very popular Z610 HX chain. - "Stretch Proof" design helps prevent stretch in the plates, meaning chain adjustments are needed less frequently, especially when the chain is new. - Relatively light weight but still quite durable. - Features mushroom pin rivets to eliminate splayed links. - Also supplied with a re-usable master link that allows for easy installation and removal. - 1/2" x 3/32" - 112 links.
Crewkerz Chain Tensioner
$50.00
- Sprung tensioner from Crewkerz. - Fits Crewkerz Cleep and Jealousy frames and Clean frames only. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body constructed from high grade 6061 T6 aluminum alloy. - Durable steel spring keeps the chain tight. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures an accurate setup. - Gloss black anodized finish.
Trialtech Race Half Bashring
$38.00
- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).
TruVativ Steel Crank Bolts
$8.00
- Replacement steel crank bolts from TruVativ. - Fitted for an 8mm allen key. - Includes steel washers. - Available in M12 and M15 sizes. - Sold as a pair.
Crewkerz Freewheel Lockring
$18.00
- Replacement freewheel lockring to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano Hollowtech 2 style bottom bracket tool such as the Park BBT-9. - When installing, the small lip side should be facing the bb bearing. - Also fits Crewkerz rear hubs as a cog lockring. - Anodized red finish.
Crewkerz Crank Pre-Load Bolt
$20.00
- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano FC16 crank arm installation tool. - To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten. - Anodized red finish.
Inspired Truvativ V2 Integrated Bashring
$110.00
- Unqiue custom designed bashring with integrated chainring from Inspired. - As found on the Inspired complete bikes. - CNC machined from high strength 7075 aluminum. - 22t chainring is ideal for most street trials bikes and fits 1/8" and 3/32" chains. - 1-piece sprocket and bashring design helps to reduce weight and maximize stiffness. - Compatible with Truvativ and SRAM 'Direct Mount' crank arms only, fits directly onto the drive side spline. - Not supplied with mounting bolts (you can re-use your existing bolts). - Satin black anodized finish with laser etched Inspired logo.
Inspired Hope Integrated Bashring
$110.00
- Unqiue custom designed bashring with integrated chainring for Hope cranks from Inspired. - CNC machined from high strength 7075 aluminum. - 22t chainring is ideal for most street trials bikes and fits 1/8" and 3/32" chains. - 1-piece sprocket and bashring design helps to reduce weight and maximize stiffness. - Compatible with Hope cranks only, fits directly onto the drive side spline. - Not supplied with mounting bolts. - Gloss black anodized finish with laser etched Inspired logo.
Trialtech Race Forged Cranks
$60.00
- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.
Jitsie Race 135.9 Freewheel
$120.00
- The Jitsie Race 135.9 freewheel as found on their top end Race bikes. - 9 steel pawls mounted in groups of 3 with a 45 tooth ratchet ring result in 135 clicks for super fast pedaling response. - Forged steel construction offers great durability. - High quality sealed bearings for improved durability and protection from dirt and grit. - Unique design allows the bearings to be held in place using an external circlip. - Features BB-style removal tabs that allow the freewheel to be removed with a Shimano-style 20 spline bottom bracket tool. - Standard 1.37" x 24tpi thread. - Available in 18t with black finish only. Please Note: This freewheel may require a small spacer to work properly with some bashrings. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
Echo Pedal Cage Bolt
$1.00
- Replacement pedal cage bolts from Echo. - M5 thread with countersunk head. - Constructed from steel for maximum durability. - Bolt head fitted for 3mm allen key. - Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All. - Sold individually.
Previous page Page 2 of 2