Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Drivetrain

$38.00
- The Jitsie snail cams are lightweight, high quality chain tensioners. - Innovative, asymmetrical shape allows for precise chain tension. - CNC machined from 7075 T6 aluminum. - Design based on snail cams used in motorcycle trials with multiple cut outs in the shape to drop as much weight as possible without sacrificing durability and strength. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Laser-etched Jitsie logos.
$38.00
- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).
$40.00
- Bottom bracket cups for Crewkerz AS30 cranksets. - Machined from high quality aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - Pressfit 30 cups fit frames with a 46mm internal diameter pressfit bottom bracket shell such as Crewkerz and Clean. - Available in anodized black. - Sold as a pair of cups (one bottom bracket).
$40.00 - $45.00
- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
$42.00
- Lightweight half bashring from Crewkerz as found on their AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with pre-2018 Crewkerz AS30 cranks, may also work with other cranks. - Available in 18t with red anodized finish. Please Note: These are designed for use with pre-2018 Crewkerz AS30 cranksets. The small pocket on the ring that mates with the pin needs to be modified slightly (enlarged) to fit the newer AS30 cranks.
$42.00
- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).
$45.00
- Lightweight half bashring from Crewkerz as found on their 2018 and newer AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 forged cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with 2018 and newer Crewkerz AS30 cranks, may also work with older AS30 and other cranks. - Available in 18t with red anodized finish.
$46.00
- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.
$46.00
- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
$55.00
- A bashring for threaded cranks on street trials bikes from Trialtech. - CNC machined, high quality 7075-T6 aluminum alloy bashring. - Specifically designed to work on modern street trials bikes. - 22T size, to fit threaded cranks. - 5mm plain cross section gives excellent strength whilst the unique CNC machined pockets remove weight in key areas. - Available in anodized black with Trialtech laser etched logo.
$60.00
- Lightweight full bashring from Jitsie. - As found on their Varial Hybrid bike. - CNC machined from super strong 7075 T6 aluminum. - Asymmetric design provides full protection while reducing unnecessary material where it isn't needed. - Machined cutout further reduces weight. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Black anodized finish with laser etched Jitsie logos.
$60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
$60.00
- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.
$65.00
- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.
$65.00
- Custom designed sprung chain tensioner as fitted to Inspired Team bikes. - Developed and proven by Inspired Team riders. - Constructed from high grade 7075 and 6061 aluminum alloy. - High tension coil spring provides excellent chain tension. - Single sided cage saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise and low drag. - Slim, integrated design helps reduce the chance of damage during riding. - Extended cage improves ergonomics and further aids chain removal. - Fits directly onto Skye V3/V3.5, Fourplay/Hex (2014-onwards) and Link (2023-onwards) frames. - Satin black anodized finish. - 16t (Fourplay, Skye, Link) or 18t (Hex) compatible versions available. - Includes frame fixture bolts.
$66.00
- Superlight titanium pedal axles from Trialtech. - Lightweight replacement axles for Trialtech Sport Lite caged pedals. - Precision CNC machined from 6AI-4V titanium. - Includes dust seals and axle nuts. - Sold as a pair. - Laser etched Trialtech logos. - Also fit Hashtagg, Jitsie, Try-All, Clean and other caged pedals.
$70.00
- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.
$75.00 - $92.00
- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
$80.00
- Platform pedals from Belgian brand Jitsie. - CNC machined from durable 6061-T6 aluminum. - Slight concave pedal body shape provides maximum foot/pedal contact. - 20 steel pins per pedal ensure optimal grip and confidence. - Strong, reliable steel axle with 6mm allen key fitting in the back and 15mm wrench flats for easy installation and removal. - Sealed bearings for superior durability and smooth running. - Low profile shape gives great ground clearance. - Chamfered edges help to minimize weight and deflect impacts. - Available in anodized black with laser-etched Jitsie logos. - Supplied with spare pins.
$85.00
- The Trialtech Sport Lite is a light, high quality ISIS bottom bracket. - Tested and developed over a period of more than a year to ensure maximum reliability. - High quality manufacturing with excellent tolerances and finishing quality. - Minimalist aluminum alloy cups and center sleeve help reduce weight. - Unique, high load bearing units for increased strength and durability. - Multiple seals keep out dirt and grit. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 'Top Hat' axle spacers maintain correct bearing preload and crank fitment, plus they can be removed easily to ensure that all types of 20-tooth Shimano BB tool can be used with this BB. - 68mm shell width with 128mm long axle. - Includes color-matched black crank bolts. - Anodized black finish with laser etched Trialtech logo. Please Note: When fitting axle spacers, the wide end must face outwards away from the frame as shown in the pictures. Incorrect fitting of the spacers will void the warranty.
$95.00
- The Jitsie 108.9 freewheel is a high quality freewheel with 108 engagement points. - Forged steel construction offers great durability. - 9 steel pawls mounted in groups of 3 with 36 teeth result in 108 clicks. - Silver finish with black inner plate displaying Jitsie logo and product details. - Features stronger springs than other similar freewheels which provides more positive engagement, a louder sound and reduced bedding in time. - Four recesses in the main body allow nearly all 4-prong freewheel tools to be used. - Standard 1.37" x 24tpi thread. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
$115.00
- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized black finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.
$125.00
- Third generation of Inspired's proven and reliable Team platform pedals. - Updated custom CNC machined 6061 main body helps reduce overall weight by almost 8%. - Ultra low profile shape gives great ground clearance, while the foot hugging concave body with screw-in replaceable pins stick to your feet. - Chamfered edges help to minimize weight and deflect impacts. - Strong Cro-moly axle with smooth DU bush and sealed bearing system keep dirt out. - Available in anodized Black with stylish Inspired laser etched logos. - 8mm allen key fitting in the back of the axle for easy installation and removal.
$150.00
- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products. - Forged from high quality 7050 aluminium alloy. - Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw. - Fits all ISIS bottom brackets. - Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket. - Multi-stage forging allows a design that is super light yet stiff and strong. - Tough anodized matt silver finish with a stylish and distinctive black SL logo. - 32.5mm offset provides plenty of clearance. - Available in 165mm, 170mm and 175mm lengths.
$200.00
- Superlight splined crankset from Trialtech including freewheel, bashring and 7075 crank bolts. - One of the most cost-effective splined cranksets available. - Compatible with all standard M15 ISIS bottom brackets. - Splined 108.9 freewheel can be removed using standard allen/hex key multi tool. No more fooling with vices and pry bars trying to get stuck freewheels off! - Splined 7075 bashring can be set up for left or right foot forward riders and is always held at the correct angle by the splines. - Multi-stage forging allows a design that is super light yet stiff and strong. - Trialtech splined freewheel provides 108 engagement points per revolution with a proven 9 pawl design. - 32.5mm offset provides plenty of clearance. - Tough sandblast black anodized finish with distinctive Sport Lite laser logos. - Additional crank bolt spacers recommended when using titanium bottom brackets. - Available in 165mm, 170mm and 175mm lengths. - Full crankset includes crank arms, freewheel, freewheel lockring, half bashring, and M15 crank bolts.
$350.00
- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - 170 and 175 lengths supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring (170 & 175 lengths only). Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty. Also note: Some cranksets now feature black anodized parts instead of the red shown in the photos.
Previous page Page 2 of 2