Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Drivetrain

Crank Brothers Stamp 3
$99.99
Size-specific elite-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: Forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm - Adjustable pins: 10 per side - Weight: 455g per pair - Warranty: 5 years
Crewkerz Tensioner Spring
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.
Crewkerz Freewheel Lockring
$15.00
- Replacement freewheel lockring to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano Hollowtech 2 style bottom bracket tool such as the Park BBT-9. - When installing, the small lip side should be facing the bb bearing. - Also fits Crewkerz rear hubs as a cog lockring. - Anodized red finish.
Crewkerz Crank Pre-Load Bolt
$20.00
- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano FC16 crank arm installation tool. - To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten. - Anodized red finish.
Crewkerz Splined Cog
$25.00
- Splined cog from Crewkerz. - CNC machined from super tough Cro-Moly steel for maximum durability. - Wide base gives a greater contact area between hub and sprocket, helping prevent 'dig-in' problems associated with narrow based sprockets. - Compatible with Crewkerz and Bonz hubs as well as any other hub that uses the industry standard Shimano HG spline pattern. - Compatible with all 1/8" and 3/32" chains. - Black finish with laser etched product information.
Crewkerz AS30 Bottom Bracket
$35.00
- Bottom bracket cups for Crewkerz AS30 cranksets. - Machined from high quality aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - Pressfit 30 cups fit frames with a 46mm internal diameter pressfit bottom bracket shell such as Crewkerz and Clean. - Available in anodized black. - Sold as a pair of cups (one bottom bracket).
Crewkerz Chain Tensioner
$40.00
- Sprung tensioner from Crewkerz. - Fits Crewkerz Cleep and Jealousy frames and Clean frames only. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body constructed from high grade 6061 T6 aluminum alloy. - Durable steel spring keeps the chain tight. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures an accurate setup. - Gloss black anodized finish.
Crewkerz AS30 Half Bashring
$42.00
- Lightweight half bashring from Crewkerz as found on their AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with pre-2018 Crewkerz AS30 cranks, may also work with other cranks. - Available in 18t with red anodized finish. Please Note: These are designed for use with pre-2018 Crewkerz AS30 cranksets. The small pocket on the ring that mates with the pin needs to be modified slightly (enlarged) to fit the newer AS30 cranks.
Crewkerz Splined 108 Freewheel
$75.00
- Splined freewheel from Crewkerz as found on their complete bikes. - Uses 9 steel pawls with a 36t ratchet to create 108 engagement points for super quick pedaling response. - Constructed from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel its distinctive loud sound. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Available with black finish in 18t only.
Crewkerz Splined 135.9 Freewheel
$100.00
- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized red finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.
Crewkerz AS30 Crankset
$315.00
- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - Supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring. Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty.
Czar Neuron Chain Tensioner
$46.00
- Sprung tensioner from Czar as found on their Neuron bikes. - Fits Czar Neuron frames only. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body and 9t jockey wheels constructed from high quality aluminum alloy. - Durable steel spring keeps the chain tight. - Slim design to help reduce the chance of damage during riding. - Anodized black finish.
Echo Freewheel Spacer
$1.00
- Replacement freewheel spacer from Echo. - Aluminum freewheel spacer used to space out the freewheel on the crank when not running a bashring. - 3.5mm thickness - 35mm inner diameter. - Laser-etched Echo logo. Please Note: Some of the green and red spacers do not have a logo.
Echo Pedal Cage Bolt
$1.00
- Replacement pedal cage bolts from Echo. - M5 thread with countersunk head. - Constructed from steel for maximum durability. - Bolt head fitted for 3mm allen key. - Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All. - Sold individually.
Echo Integrated Tensioner Bolt
$2.00
- Replacement integrated tensioner bolt for 2011 and newer Echo, ZOO, GU, and Czar frames. - Steel construction for maximum durability. - M5 thread - 25mm length - Sold individually
Echo Press Fit Bottom Bracket Spacer
$6.00
- Replacement bottom bracket spacer from Echo. - Fits Echo Press Fit steel and titanium bottom brackets. - Flared design works with the Echo splined crank/fw system when fitted with the flared end facing the crank. - Also works with standard cranks when fitted with the flared end facing the bb. - 11.5mm width. - Anodized black finish with Echo logos. - Sold individually.
Echo TR Pedal Cage
$11.00
- Replacement pedal cage for Echo TR pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - New cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Compatible with Echo TR and SL cage pedals only. - Available in anodized black only. - Sold individually.
Echo TR Pedal Axle
$12.00
- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!
Echo SL Splined Cog
$15.00 - $23.00 $40.00 Up to 63% Off
- Splined cogs to fit pre-2016 Echo splined hubs. - Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Offset design allows fine-tuning of the chainline by flipping over the cog. - Compatible with all 1/8" and 3/32" chains. Please Note: These may come in a black or silver finish.
Echo SL Alloy Crank Bolts
$22.00
- Lightweight aluminum crank bolts as found on Echo complete bikes. - Manufactured from high quality 7075 T6 aluminum. - Supplied with steel spacers. - Fitted for an 8mm allen key. - M15 thread fits most modern ISIS bottom brackets. - Anodized finish with laser-etched Echo logos. Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones. Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.
Echo TR Threaded Cog
$30.00
- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.
Echo Half Bashring
$38.00
- Competition style half bashring from Echo. - CNC'd from tough 7075 T6 aluminum for maximum strength. - Lightweight minimalist design covers half of the front cog or freewheel and can be setup for left or right foot forward riders. - Holes drilled in main body save weight. - Compatible with nearly all modern threaded trials cranks and is designed to cover 18t cogs or freewheels. - Anodized finish with laser-etched logos.
Echo Splined Cog V2
$40.00
- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.
Echo Full Bashring
$46.00
- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.
Echo Mini Bashplate
$46.00
- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.
Echo 4-Bolt Bashplate
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
Echo TR Caged Pedals
$60.00
- Echo's classic TR Caged pedals have been updated with a new cage design. - Single cage design is lighter and grippier than traditional double cage pedals. - Super slim cage profile provides more clearance over obstacles. - Pedal body is forged from 6061 Aluminum while the axle is made from heat-treated steel. - Cages are made from 7075 T6 Aluminum making them tough and durable. - New cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Wider cage (front to rear) than many other caged pedals, making them great for riders with larger feet while still offering superior grip and stability for any size feet. - Sealed cartridge bearings improve durability and run smoothly. - Black pedal body and anodized cages in a variety of colors.
Echo Sprung Chain Tensioner
$65.00
- Sprung tensioner from Echo/Czar as found on their complete bikes. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body and 7t jockey wheels constructed from high quality aluminum alloy. - Durable steel spring keeps the chain tight. - Slim design to help reduce the chance of damage during riding. - Fits Echo and Czar frames 2019 and newer only. - Anodized black finish. - Supplied with mounting bolts.
Echo TR Freewheel
$76.00
- The Echo TR freewheel is one of the most popular and maintenance-free freewheels on the market. - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Constructed from tough CroMo steel for maximum durability. - Unique spring design provides reliable engagement and gives it a loud sound. - Standard 1.37" x 24tpi thread fits all threaded trials cranks. - Available in 18t only. - Although a standard 4-Prong tool can be used to remove Echo freewheels, the Echo Freewheel tool fits much better and is easier to use.
Echo TR Platform Pedals
$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
Page 1 of 4 Next page