Filter By:
- Bashrings & Bashplates (11)
- Bottom Brackets (6)
- Chains (3)
- Chain Tensioners (8)
- Cogs (8)
- Cranks (5)
- Freewheels (3)
- Pedals (9)
- Show More Categories
- Small Parts (11)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
Drivetrain
$1.00
- Replacement pedal cage bolts from Echo.
- M5 thread with countersunk head.
- Constructed from steel for maximum durability.
- Bolt head fitted for 3mm allen key.
- Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All.
- Sold individually.
$1.00 - $2.00
- Replacement master link for KMC singlespeed chains.
- Allows the chain to be conveniently removed without a chain tool.
- Includes connecting link and retaining clip.
- Available in 3/32" (silver) and 1/8" (grey) sizes.
$3.00 - $5.00
- Single half link from KMC.
- The half link is an outer link that reduces to an inner link, making it half the length of a normal link.
- Very useful for getting chain length or gearing just right.
- Available to fit 1/8" or 3/32" chains.
- Grey finish.
$8.00
- Replacement steel crank bolts from TruVativ.
- Fitted for an 8mm allen key.
- Includes steel washers.
- Available in M12 and M15 sizes.
- Sold as a pair.
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners.
- Strong tension to keep the chain tight and the tensioner from bouncing.
- Ideal if your spring has broken or become worn out.
- Sold singly.
$12.00
- Replacement axles for Echo pedals.
- Constructed from durable steel.
- Flat spaces on axle end to fit a 15mm pedal wrench.
- Bearings, nuts not included.
- Compatible with Echo TR and SL caged and platform pedals.
- Sold individually.
Please Note: The right pedal axle requires a left-hand threaded nut!
$12.00
- Replacement crank pre-load bolt to fit Inspired Flow Plus cranksets.
- High quality aluminum construction.
- Fitted for a 6mm allen key.
- To be snugged lightly in place before tightening the crank arm pinch bolts. Do not over tighten.
- Anodized black finish.
- Sold individually.
$12.00
- 10mm chain tugs from Trialtech.
- Fits most 20" mod bikes and some 26" bikes.
- CNC machined aluminum construction, with M6 threaded bar to keep weight down while maintaining maximum functionality.
- Guides on the main body prevent the tug from rotating when tightening the axle bolts.
- Sold as a pair.
$12.00
- Replacement bearing to fit Spanish bottom brackets only.
- Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others.
- High quality construction with double seals.
- For use on the drive or non-drive side.
- Sold singly.
- OD:37mm, ID:22mm, Width:9mm
$18.00
- Replacement freewheel lockring to fit Crewkerz AS30 cranks.
- High quality aluminum construction.
- Fitted for a Shimano Hollowtech 2 style bottom bracket tool such as the Park BBT-9.
- When installing, the small lip side should be facing the bb bearing.
- Also fits Crewkerz rear hubs as a cog lockring.
- Anodized red finish.
$18.00
- Custom spacer designed to allow the Inspired Truvativ V2 Integrated Bashring to be fitted to SRAM DUB Cranksets.
- Precision CNC-machined from top quality aluminum.
- Replaces the spacers supplied as standard with the DUB crankset.
- Sold individually.
$18.00
- High quality, CNC machined cromoly snail cam from Trialtech.
- Gloss nickel, hard coated finish for extra durability.
- A series of incrementally smaller drilled holes are designed to reduce weight without compromising strength.
- Notched design to hold your wheel in position and ensure that it doesn't move, designed to be a 'fit-and-forget' product.
- High resolution tooth pattern provides fine chain adjustment.
- Will fit most bikes with a 10mm axle designed to work with snail cam tensioners.
- Sold individually to allow you to tailor your setup to your specific needs.
$20.00
- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks.
- High quality aluminum construction.
- Fitted for a Shimano FC16 crank arm installation tool.
- To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten.
- Anodized red finish.
$20.00
$35.00
43% Off
- Bottom bracket cups for Racing Line BB30 cranksets.
- Machined from high quality 7075 aluminum.
- Sealed bearings run smoothly and help keep out dirt and grit.
- 1.37" x 24tpi thread fits all threaded bottom bracket shells.
- Compatible with Hollowtech 2 style bb tools.
- Also compatible with Hashtagg and Try-All BB30 cranksets as well as others.
- Available in anodized red.
- Sold as a pair.
$20.00
- Lightweight and extremely minimal single speed spacer kit from Trialtech.
- Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm.
- Great for single speed conversions or fine tuning your chainline.
- CNC machined from high grade aluminum alloy, then anodized to prevent corrosion.
- Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers.
- Cassette lockring sold separately.
$22.00
- Lightweight aluminum crank bolts as found on Echo complete bikes.
- Manufactured from high quality 7075 T6 aluminum.
- Supplied with steel spacers.
- Fitted for an 8mm allen key.
- M15 thread fits most modern ISIS bottom brackets.
- Anodized finish with laser-etched Echo logos.
Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones.
Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.
$22.00
- Singlespeed chain used by many trials riders.
- Spec'd on many complete trials bikes such as Inspired bikes.
- The successor to the very popular Z610 HX chain.
- "Stretch Proof" design helps prevent stretch in the plates, meaning chain adjustments are needed less frequently, especially when the chain is new.
- Relatively light weight but still quite durable.
- Features mushroom pin rivets to eliminate splayed links.
- Also supplied with a re-usable master link that allows for easy installation and removal.
- 1/2" x 3/32"
- 112 links.
$23.00
$40.00
43% Off
- Splined cogs to fit pre-2016 Echo splined hubs.
- Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs.
- Manufactured from high quality, durable ChroMo steel.
- Wide base prevents cogs from digging into the driveshell
- Offset design allows fine-tuning of the chainline by flipping over the cog.
- Compatible with all 1/8" and 3/32" chains.
Please Note: These may come in a black or silver finish.
$26.00
- Replacement chain tugs to fit Inspired Flow frames.
- Updated design allows them to also function as the hub bolt washer, eliminating extra pieces and creating a lower profile.
- High quality CNC machined aluminum construction.
- Sold as a pair with tensioner bolts (does not include frame bolts).
$26.00
- Replacement pedal cage for Jitsie Single Cage pedals.
- Ideal if your cage has broken or the teeth have become worn.
- 7075 T6 aluminum construction provides excellent durability.
- Available in anodized black only.
- Sold as a pair.
$26.00 - $28.00
- Affordable and durable steel threaded cogs from Jitsie.
- Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks.
- Wide base gives a strong connection between the sprocket and hub/crank.
- Made from heat-treated steel
- Compatible with all 1/8" and 3/32" chains.
- 12t-14t are offset, 15t is centered.
$28.00 - $30.00
- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability.
- A shot blasted surface finish after machining increases the surface hardness and improves durability.
- Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets.
- Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down.
- Compatible with all 1/8" and 3/32" chains.
- Industry standard Shimano HG spline pattern.
- Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette.
- Stylish laser etched logos show great attention to detail.
Please Note: These may be supplied with a silver or black finish.
$28.00 - $35.00
- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes.
- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability.
- A shot blasted surface finish after machining increases the surface hardness and improves wear life.
- Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks.
- Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank.
- Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down.
- Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication.
- Compatible with all 1/8" and 3/32" chains.
$30.00
- Threaded steel cogs from Echo.
- Made from heat-treated steel for maximum durability.
- Wide base increases the thread contact area to reduce the likelihood of stripping.
- Standard 1.37" x 24tpi threads to fit all fixed rear hubs.
- Compatible with all 1/8" and 3/32" chains.
- 16t cog features holes drilled around the base to save weight.
$32.00
- Splined cog from Crewkerz.
- CNC machined from super tough Cro-Moly steel for maximum durability.
- Wide base gives a greater contact area between hub and sprocket, helping prevent 'dig-in' problems associated with narrow based sprockets.
- Compatible with Crewkerz and Bonz hubs as well as any other hub that uses the industry standard Shimano HG spline pattern.
- Compatible with all 1/8" and 3/32" chains.
- Black finish with laser etched product information.
$35.00
- Replacement high quality, CNC-machined aluminum tensioner mount from Inspired.
- Fits 2014 and newer Inspired Fourplay frames and Inspired Skye V3 frames only.
- Includes fixing bolts.
- Available in black only.
$35.00
- Lightweight ISIS crank bolts from Jitsie.
- Designed and manufactured in Belgium as part of the Jitsie Race range.
- Compatible with all M15 threaded ISIS bottom brackets.
- Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum.
- Supplied with superlight aluminum washers, saving further weight.
- Fitted for a 10mm allen key instead of 8mm used on most other crank bolts.
- Available in anodized black or red with laser-etched Jitsie logos.
- Sold as a pair.
$35.00 - $50.00
- Light sprung chain tensioner from Trialtech.
- Single speed specific chain tensioner.
- Constructed from high grade aluminum alloy, spring steel and chromed steel.
- Multi coil spring to prevent loss of tension over time, a common problem with other tensioners.
- Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal.
- Runs on two plastic jockey wheels for minimum noise.
- Slim design to help reduce the chance of damage during riding.
- Adjustable chain line ensures compatibility with most setups.
- Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products.
- The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms.
- The model with hanger mount fits all frames with a standard derailleur hanger.
- Gloss black anodized finish.
$36.00
- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank.
- Features a one-piece aluminum body
- Steel axles are strong and durable.
- Sealed bearings are smooth-running and keep out water and dirt.
- Features more replaceable pins than similar platform pedals for added grip.
- Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals.
- Large contact area helps keep feet on the pedals at all times.
Please Note: These pedals come with reflectors attached (not shown in picture).
$38.00
- Lightweight half bashring from Jitsie.
- Designed and developed with World Champion Dani Comas.
- CNC machined from 7075 T6 aluminum.
- Asymmetric width for optimal protection while decreasing weight as much as possible.
- Teeth on outer edge provide additional grip.
- Compatible with nearly all modern threaded trials cranks.
- Designed to cover 18t cogs or freewheels.
- Laser etched Jitsie logo.
Page 1 of 2
Next page