Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Echo

Echo Urban 4-Bolt Brake Booster
$54.00
- Echo's Urban 4-bolt booster is one of the stiffest boosters available. - Redesigned to be lighter while still offering excellent rigidity for braking. - A great option to stiffen up the brake on a flexy frame. - CNC-machined holes and cutouts reduce unnecessary weight. - Designed to work with most modern trials frames with 4-bolt mounts spaced at 100mm. - Includes 4 mounting bolts and aluminum spacers. - Anodized finish with laser-etched logos.
Echo SL Brake Clamps
$46.00
- Echo's SL clamps are light and allow for easy fine tuning of brake cylinders. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Anodized finish with laser-etched logos on the top clamps. - Includes titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo SL 2-Bolt Brake Booster
$46.00
- 2-bolt booster from Echo as found on their complete bikes. - Constructed from 6061 T6 Aluminum for maximum stiffness. - Booster body is machined out to reduce weight where it isn't needed. - Wide profile also offers some protection for the crossover line on HS33 brakes. - Designed to fit 26", 24", and 20" trials bikes with 4-bolt mounts spaced at 100mm. - Supplied with two mounting bolts and spacers. - Anodized finish with laser-etched logos.
Echo TR Threaded Non-Disc 116mm Rear Hub
$60.00
- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.
Echo SL Caged Pedals
$116.00
- Echo's tried and true caged pedals with lightweight titanium axles! - Single cage design is lighter and grippier than traditional double cage pedals. - Super slim cage profile provides more clearance over obstacles. - Pedal body is forged from 6061 aluminum while the axle is made from titanium. - Cages are made from 7075 T6 aluminum making them tough and durable. - Cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Wider cage (front to rear) than many other caged pedals, making them great for riders with larger feet while still offering superior grip and stability for any size feet. - Sealed cartridge bearings improve durability and run smoothly. - Cage bolts are also titanium, providing further weight savings. - Black pedal body and anodized cages in a variety of colors.
Echo Top Cap Bolt
$1.00 - $3.00
- Replacement top cap bolts for Echo TR headsets. - Countersunk head designed to fit flat Echo top caps but may also work with other top caps. - Fitted for 4mm allen key. - M6 x 30mm size. - Available in steel or titanium. - Not compatible with sloping Echo top caps.
Echo Freewheel Spacer
$1.00
- Replacement freewheel spacer from Echo. - Aluminum freewheel spacer used to space out the freewheel on the crank when not running a bashring. - 3.5mm thickness - 35mm inner diameter. - Laser-etched Echo logo. Please Note: Some of the green and red spacers do not have a logo.
Echo Stem Bolt
$1.00 - $2.00
- Replacement stem bolts for Echo stems. - M6 x 20mm size. - Fitted for 5mm allen key. - May also fit other stems. - Available in steel with black or silver finish or titanium.
Echo SL M6 Brake Clamps
$46.00
- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo SL Splined Cog
$15.00 - $23.00 $40.00 Up to 63% Off
- Splined cogs to fit pre-2016 Echo splined hubs. - Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Offset design allows fine-tuning of the chainline by flipping over the cog. - Compatible with all 1/8" and 3/32" chains. Please Note: These may come in a black or silver finish.
Echo Integrated Tensioner Bolt
$2.00
- Replacement integrated tensioner bolt for 2011 and newer Echo, ZOO, GU, and Czar frames. - Steel construction for maximum durability. - M5 thread - 25mm length - Sold individually
Echo TR Platform Pedals
$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
Echo SL Rim Brake
$140.00
- Echo's lightweight hydraulic rim brake as found on their high end complete bikes. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - TPA is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Simple lever clamp design is easy to use and comes with a lightweight titanium clamp bolt. - Brake hose port is located close to the handlebar to help protect the brake lines in crashes. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Slim slave cylinders forged from 6061 T6 aluminum allow for more heel clearance than Magura slaves. - Black slave cylinders with grey lever body. - For use with mineral oil only, DO NOT use DOT fluid with this brake. - Sold with front or rear length brake line. Please Note: This brake is not supplied with brake pads, they must be purchased separately.
Echo Urban Press-Fit ISIS Bottom Bracket
$76.00 - $100.00 $76.00 - $125.00 Up to 20% Off
- Echo Urban ISIS bottom bracket as found on all Echo bikes and frames. - Uses press-fit bearings (the same as Spanish style bottom brackets used in BMX) instead of a traditional threaded ISIS bb. - Proven design allows Echo to use larger bearings than standard ISIS bottom brackets, which translates to longer life and smoother spin. - Axle walls are slightly thicker than traditional ISIS bottom brackets, adding strength without sacrificing much weight. - Lighter than most conventional bottom bracket designs while still being very durable. - Available with steel (black axle) or titanium (gold axle) axle in 124mm width. - Steel version now includes top hat spacers making it compatible with the new Echo splined crank/fw system. - Compatible with 2011 and newer Echo and Zoo! trials frames and 2009 and newer Echo, Czar, and Adamant 24" wheel frames, will not fit a standard 1.37" x 24 threaded bottom bracket shell. - Includes axle, bearings, axle spacers, and cranks bolts.
Echo TR Threaded Non-Disc 135mm Rear Hub
$60.00
- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Standard 1.37" x 24tpi threads compatible with threaded cogs. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.
Echo TR Headset
$56.00
- The classic Echo TR headset. - Made from durable 2014 aluminum. - Fits 1 1/8" headtubes. - Countersunk top cap bolt mates perfectly with Echo's topcap. - Drilled top cap keeps weight to a minimum. - Anodized finish with laser-etched logos. - Starnut and color-matched 5mm spacer included. Please Note: some TR headsets may now come with updated "E" Echo logos instead of the Echo text on the cups and spacers.
Echo Full Bashring
$46.00
- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.
Echo Rim Strips
$6.00
- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.
Echo TR Rotor
$25.00 - $26.00
- Replacement rotor for Echo TR disc brakes. - Supplied with allen key mounting bolts. - 6-bolt standard mounting pattern. - Available in 160mm and 180mm sizes. - Also compatible with Hope Trial Zone brakes.
Echo TR M6 Brake Clamps
$32.00
- M6 Echo TR brake clamps for new Echo and Gu frames. - Machined from 6061 T6 aluminum. - Holes machined into the clamps save weight. - Washerless design eliminates the need for plastic Magura cylinder washers, making brake set up a snap. When you clamp the cylinders down, your brake pads will already be set up squarely with the rim, assuming, of course, that the mounts on your frame or fork are square. - Wider slots than standard TR clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 steel mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo Mark 5 20
$949.00
- Echo's entry-level 20" bike built around their Mark 5 20" frame. - Quality Echo TR components give it an excellent value. - Echo's proven integrated chain tensioners are lightweight and easy to use. - Grippy Maxxis Creepy Crawler tires provide great traction on obstacles. - Dual Avid BB5 mechanical disc brakes provide reliable stopping power. - Splined crank/freewheel and rear cog for easy installation and removal. - Echo's Press-Fit ISIS bottom bracket is simple and reliable. Please Note: This bike comes spec'd with Avid BB5 mechanical disc brakes, NOT the Echo TR hydraulic discs pictured. Geometry: - Wheelbase: 1000mm - Chainstays: 350mm - BB Height: +85mm - Head Angle: 73.5° - Reach: 605mm - Frame Spacing: 116mm
Echo TR Caged Pedals
$60.00
- Echo's classic TR Caged pedals have been updated with a new cage design. - Single cage design is lighter and grippier than traditional double cage pedals. - Super slim cage profile provides more clearance over obstacles. - Pedal body is forged from 6061 Aluminum while the axle is made from heat-treated steel. - Cages are made from 7075 T6 Aluminum making them tough and durable. - New cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Wider cage (front to rear) than many other caged pedals, making them great for riders with larger feet while still offering superior grip and stability for any size feet. - Sealed cartridge bearings improve durability and run smoothly. - Black pedal body and anodized cages in a variety of colors.
Echo Mark 6 20
$350.00
- Newly updated frame from Echo as found on their Mark 6 and Mark 6 Pro complete bikes. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 116mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional sprung tensioner. - Now featuring a 1 1/8" - 1.5" tapered headtube for a stiffer, stronger front end. - Holes machined out of headtube reduce weight. - Uses Echo's Integrated Tapered Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Top and down tube gussets at the head tube add stiffness and improve frame life. - Redesigned 2-piece bashplate mounts directly to the bb shell, reducing stress on the downtube while saving weight. - Features dedicated 4-bolt mounts spaced at 99mm. - Available in an anodized black finish with laser-etched Echo graphics. - Frame supplied with bashplate and steel spindle bottom bracket. Please Note: The headtube cutout design may be different than pictured. Geometry: - Wheelbase: 1005mm (with 30mm offset fork) - Chainstay Length: 350mm - Bottom Bracket Rise: 80mm - Head Tube Angle: 73.5° - Head Tube Length: 112mm - Reach: 620mm
Echo Rubber Grips
$10.00
- Rubber grips from Echo. - Thin profile and diamond-pattern ensure excellent grip and performance for trials while still being comfortable. - Sold as a pair. Please Note: the clear rubber compound is softer, so if you're looking for more comfort, we recommend the clear colored grips.
Echo TR Rim Brake
$110.00
- Echo's lightweight complete hydraulic rim brake as found on their complete bikes. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - Updated TPA design is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Slim slave cylinders forged from 6061 T6 aluminum allow for more heel clearance than Magura slaves. - For use with mineral oil only, DO NOT use DOT fluid with this brake. - Sold with front or rear length brake line. Please Note: This brake is not supplied with brake pads, they must be purchased separately.
Echo TR Splined Cranks
$85.00
- Echo's popular TR ISIS cranks in a splined version. - Forged from 6061 T6 aluminum making them strong and stiff. - Large slot machined into the front of the cranks reduces weight. - Splined crank/freewheel interface allows for easy installation and removal of freewheels. No more fussing with huge pry-bars to remove stuck threaded freewheels! - Designed to work with Echo style pressfit bottom brackets. - Special "top hat" bb spacers (supplied with bb or sold separately) keep the freewheel secured on the splines. - A freewheel spacer is supplied in case you want to run them without a bashring. - If a bashring is used, it must have a base width of 4mm. - Compatible only with Echo splined freewheels. - Available in 160mm and 170mm. - Anodized black with laser-etched Echo logos. Please Note: The Echo splined crank/freewheel system is only compatible with Echo style pressfit ISIS bottom brackets found on Echo, Zoo, Czar, and GU frames as well as others.
Echo Splined Cog V2
$40.00
- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.
Echo TR Splined Non-Disc 116mm Rear Hub
$70.00
- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.
Echo TR Pedal Cage
$11.00
- Replacement pedal cage for Echo TR pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - New cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Compatible with Echo TR and SL cage pedals only. - Available in anodized black only. - Sold individually.
Echo TR Brake Clamps
$32.00
- The Echo TR brake clamps are light, inexpensive, and reliable. - Machined from 6061 T6 Aluminum - Holes machined into the clamps save weight. - Washerless design eliminates the need for plastic Magura cylinder washers, making brake set up a snap. When you clamp the cylinders down, your brake pads will already be set up squarely with the rim, assuming, of course, that the mounts on your frame or fork are square. - Anodized finish with laser-etched logos on the top clamps. - Includes steel mounting bolts and washers. - Sold as a pair (mounts for one brake).
Page 1 of 3 Next page