Skip to main content

Filter By:

Echo

Echo Pedal Cage Bolt
$1.00
- Replacement pedal cage bolts from Echo. - M5 thread with countersunk head. - Constructed from steel for maximum durability. - Bolt head fitted for 3mm allen key. - Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All. - Sold individually.
Echo Stem Bolt
$1.00 - $2.00
- Replacement stem bolts for Echo stems. - M6 x 20mm size. - Fitted for 5mm allen key. - May also fit other stems. - Available in steel with black or silver finish or titanium.
Echo Integrated Tensioner Bolt
$2.00
- Replacement integrated tensioner bolt for 2011 and newer Echo, ZOO, GU, and Czar frames. - Steel construction for maximum durability. - M5 thread - 25mm length - Sold individually
Echo Rear Hub Bearing
$4.00
- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.
Echo Rim Strips
$6.00
- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.
Echo Derailleur Hanger
$10.00
Derailleur hangers snap pretty regularly when you get into trials. You might hit it on a ledge or when you jump from obstacle to obstacle. It's always advised to have a spare hanger on hand, so you can get back on your bike in 5 minutes. - Break a derailleur hanger on your Echo frame? These are what you need. - Compatible with all vertical dropout 2005-2010 Echo, Zoo!, Adamant, Czar, and GU frames. - Supplied with mounting bolt.
Echo Foam Grips
$10.00
- Lightweight foam grips from Echo. - Tough, durable foam compound feels a bit more like a rubber grip than other foam grips. - Foam construction is comfortable on the hands with or without gloves. - Subtle matte black Echo logos on each grip. - Sold as a pair. - Bar end plugs NOT included.
Echo Rubber Grips
$10.00 - $12.00
- Rubber grips from Echo. - Thin profile and diamond-pattern ensure excellent grip and performance for trials while still being comfortable. - Sold as a pair. Please Note: the clear rubber compound is softer, so if you're looking for more comfort, we recommend the clear colored grips.
Echo TR Pedal Axle
$12.00
- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!
Echo SL Alloy Crank Bolts
$22.00
- Lightweight aluminum crank bolts as found on Echo complete bikes. - Manufactured from high quality 7075 T6 aluminum. - Supplied with steel spacers. - Fitted for an 8mm allen key. - M15 thread fits most modern ISIS bottom brackets. - Anodized finish with laser-etched Echo logos. Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones. Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.
Echo SL Splined Cog
$23.00 $40.00 43% Off
- Splined cogs to fit pre-2016 Echo splined hubs. - Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Offset design allows fine-tuning of the chainline by flipping over the cog. - Compatible with all 1/8" and 3/32" chains. Please Note: These may come in a black or silver finish.
Echo TR Threaded Cog
$30.00
- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.
Echo Half Bashring
$38.00
- Competition style half bashring from Echo. - CNC'd from tough 7075 T6 aluminum for maximum strength. - Lightweight minimalist design covers half of the front cog or freewheel and can be setup for left or right foot forward riders. - Holes drilled in main body save weight. - Compatible with nearly all modern threaded trials cranks and is designed to cover 18t cogs or freewheels. - Anodized finish with laser-etched logos.
Echo Splined Cog V2
$40.00 - $45.00
- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.
Echo Freewheel Tool
$42.00
- Handy tool for removing Echo freewheels. - 8-prong design fits Echo TR and SL threaded freewheels only. - Square design allows the tool to be clamped more securely in a vise than most other freewheel tools. - Although it is possible to remove an Echo freewheel with a standard 4-Prong tool, this tool fits better with the Echo design and makes the process much easier.
Echo Full Bashring
$46.00
- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.
Echo Mini Bashplate
$46.00
- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.
Echo SL 2-Bolt Brake Booster
$46.00
- 2-bolt booster from Echo as found on their complete bikes. - Constructed from 6061 T6 Aluminum for maximum stiffness. - Booster body is machined out to reduce weight where it isn't needed. - Wide profile also offers some protection for the crossover line on HS33 brakes. - Designed to fit 26", 24", and 20" trials bikes with 4-bolt mounts spaced at 100mm. - Supplied with two mounting bolts and spacers. - Anodized finish with laser-etched logos.
Echo SL Brake Clamps
$46.00
- Echo's SL clamps are light and allow for easy fine tuning of brake cylinders. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Anodized finish with laser-etched logos on the top clamps. - Includes titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo SL M6 Brake Clamps
$46.00
- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo Integrated Headset
$48.00
- The Echo Integrated Headset, as found on Echo bikes. - Superlight integrated headset: the bearings press directly into the frame, keeping weight to an absolute minimum. - Easy to install and low maintenance. - Compatible with all Echo, GU, and Czar frames 2015 and newer. - Includes bearings, dust cap wedge, 2 6mm headset spacers, sloping top cap, and titanium top cap bolt. - Not supplied with crown race. - Available to fit standard 1 1/8" frames and 1 1/8"-1.5" tapered frames.
Echo SL 20
$50.00
- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.
Echo SL 26
$50.00 - $60.00 $60.00 Up to 17% Off
- Echo's lightweight SL front rim. - Single wall construction and un-eyeletted design save weight. - 38mm width provides stability and helps prevent tire roll. - Large holes are cnc-machined out of the rim to save further weight. - Constructed from 6061 T6 aluminum to improve durability and brake performance. - Available in 32 hole spoke drilling only. - Black or red anodized finish.
Echo TR Non-Disc Front Hub
$52.00
- The classic Echo TR front non-disc hub. - Lightweight 10mm 7075 T6 aluminum axle. - Hub shell machined from durable 2014 aluminum. - Sealed bearings provide smooth and reliable operation in all conditions. - Supplied with durable steel axle bolts. - Spaced at 100mm to fit nearly all trials forks. - Anodized black finish with laser-etched logos. - Available in 32 hole drilling only. Please Note: Echo hubs use 10mm axles which may not fit in some forks that use 9mm dropouts (Trialtech for example).
Echo 4-Bolt Bashplate
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
Echo SL 24
$56.00
- Echo's new lightweight front 24" rim as seen on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black.
Echo TR Disc Brake Lever
$56.00
- Replacement Echo TR hydraulic disc brake lever. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - Updated TPA design is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Lever design uses brass bushings to help reduce any play that may develop over time in the lever blade. - Available in black/silver body with anodized red TPA adjuster. - Barb fitting not included. Please Note: This lever is not compatible with any rim brakes as the leverage ratios are different.
Echo TR Headset
$56.00
- The classic Echo TR headset. - Made from durable 2014 aluminum. - Fits 1 1/8" headtubes. - Countersunk top cap bolt mates perfectly with Echo's topcap. - Drilled top cap keeps weight to a minimum. - Anodized finish with laser-etched logos. - Starnut and color-matched 5mm spacer included. Please Note: some TR headsets may now come with updated "E" Echo logos instead of the Echo text on the cups and spacers.
Echo TR Rim Brake Lever
$56.00
- Replacement Echo TR hydraulic rim brake lever. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - Updated TPA design is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Lever design uses brass bushings to help reduce any play that may develop over time in the lever blade. - Available in black/silver body with anodized red TPA adjuster. - Barb fitting not included. Please Note: This lever is not compatible with Echo disc brakes as the leverage ratios are different.
Echo TR Threaded Non-Disc 116mm Rear Hub
$60.00
- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.
Page 1 of 2 Next page