Filter By:

20" Frames

Echo Mark 6 20
$330.00
- Newly updated frame from Echo as found on their Mark 6 and Mark 6 Pro complete bikes. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 116mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional sprung tensioner. - Now featuring a 1 1/8" - 1.5" tapered headtube for a stiffer, stronger front end. - Large hole machined out of headtube reduces weight. - Uses Echo's Integrated Tapered Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Top and down tube gussets at the head tube add stiffness and improve frame life. - Redesigned 2-piece bashplate mounts directly to the bb shell, reducing stress on the downtube while saving weight. - Features dedicated 4-bolt mounts spaced at 99mm. - Available in an anodized black finish with laser-etched Echo graphics. - Frame supplied with bashplate and steel spindle bottom bracket. Geometry: - Wheelbase: 1005mm (with 30mm offset fork) - Chainstay Length: 350mm - Bottom Bracket Rise: 80mm - Head Tube Angle: 73.5° - Head Tube Length: 112mm - Reach: 620mm
Echo Mark Ti 20
$400.00 $540.00 26% Off
- Echo's updated 20" Ti frame now with a tapered headtube. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 116mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional sprung tensioner. - New tapered headtube increases strength and stiffness in the front end. The top bearing is 1 1/8" while the lower bearing is 1.5". - Large hole machined out of headtube reduces weight. - Uses Echo's Integrated Tapered Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Features a redesigned CNC one-piece dropout/disc mount that is stronger and stiffer than previous designs. - Standard 8mm thick IS disc mount. - Reinforcement between the chainstay and seatstay provides additional disc mount strength. - Seat tube has been replaced by drilled out cnc plates, giving the frame a unique look and reducing weight. - Top and down tube gussets at the head tube add stiffness and improve frame life. - A gusset has been added to the forward bashplate mount to increase durability in this high stress area. - Available in an anodized black finish with laser-etched Echo graphics on downtube. - Frame supplied with titanium bottom bracket installed. Geometry: - Wheelbase: 995mm (with 30mm offset fork) - Chainstay Length: 350mm - Bottom Bracket Rise: 80mm - Head Tube Angle: 72° - Head Tube Length: 100mm - Reach: 600mm
Page 1 of 1