Skip to main content

Filter By:

26" Frames

Echo Mark 5 26
- Echo's Mark 5 frame combines modern geometry, low weight, and affordability. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 135mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional sprung tensioner. - Large hole machined out of headtube reduces weight. - Updated with Echo's new Integrated Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Top and down tube gussets at the head tube add stiffness and improve frame life. - Features dedicated 4-bolt mounts spaced at 99mm. - Available in anodized silver finish with laser-etched Echo graphics. - Frame supplied with bottom bracket installed. Geometry: - Wheelbase: 1085mm (with 30mm offset fork) - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 72° - Head Tube Length: 110mm - Reach: 660mm
Jitsie Varial 26
- Tested and used by Jitsie team riders Nico Vallée and Rafa Tibau. - Manufactured from aerospace grade 6061-T6 aluminum. - Minimalistic design with focus on performance and durability. - Uses a 120mm long CNC machined headtube designed for an internal headset. - A large hole has been machined in the headtube to reduce weight. - CNC machined 68mm threaded bottom bracket yoke is stiff and strong. - Features dedicated 4-bolt rim brake mounts with a CNC machined integrated brake booster for optimal stiffness. - Neat CNC-machined horizontal dropouts are spaced at 116mm and feature tensioner bolts to accept snail cams. - Three brake line guides are located on the lower side of the top tube to keep the brake line in place and out of the way. - Unique frame design allows for the Jitsie aftermarket seat to be used, giving the frame added versatility. - Comes supplied with lightweight silicon seat tube plug. - Sandblasted and anodized black finish with stylish Jitsie graphics. Geometry: (measured with 400 x 35mm fork) - Wheelbase: 1085mm - Chainstay Length: 380mm - Bottom Bracket Rise: 70mm - Head Tube Angle: 71.5° - Head Tube Length: 120mm - Reach: 660mm
Crewkerz Desire 26
- Durable entry level frame from French brand Crewkerz. - Tapered 1 1/8"-1.5" headtube provides a stiff, strong front end. - Integrated chain tensioner (sold separately) with vertical dropouts means the rear wheel is always aligned perfectly and the brake doesn't need to be adjusted when the chain stretches. - Standard 68mm threaded bottom bracket shell. - CNC machined vertical dropouts spaced at 135mm. - Two large holes machined out of the headtube reduce weight. - Compatible with 1 1/8"-1.5" tapered internal headsets such as the Crewkerz tapered headset. - Dedicated 4-bolt brake mounts spaced at 100mm to fit all modern rear rims. - Gusset between the down tube and head tube adds stiffness and improves frame life in this high stress area. - Compatible with standard M5 brake clamp bolts. - 3 cable guides on the underside of the top tube keep brake line routing clean. - Available in a gloss silver finish with Crewkerz graphics. Geometry: - Wheelbase: 1075mm - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 72° - Head Tube Length: 125mm - Reach: 665mm
Page 1 of 1