Jitsie Bike Parts

- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.

- Pre-built front 24" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim. - IS 6-Bolt disc mount fits many brake rotors. - 3-Cross lacing for good strength and durability. - Standard 100mm hub spacing fits a wide variety of forks.

- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.

- Pre-built front 20" disc wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim. - 3-Cross lacing for good strength and durability. - Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.

- High quality lightweight fork as found on Jitsie complete bikes. - Developed and tested with Jitsie team riders Dani Comas and Alejandro Montalvo. - Manufactured from aerospace 7006-T6 aluminum. - 10mm CNC machined dropouts are compatible with nearly all trials hubs. - CNC machined steerer tube is internally tapered to provide extra strength without adding unnecessary weight. - 4-bolt version features CNC-machined brake mounts on the rear of the fork spaced at 85mm with extra long welds to increase durability. - Disc version features a CNC-machined Post Mount. - Ovalized fork blades give an excellent strength to weight ratio as well as a larger weld contact area at the crown. - Black anodized finish with Jitsie graphics. - Supplied without starnut. We recommend the Trialtech Large starnut. Please Note: Fork may be supplied without graphics on the fork legs.

- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.

- Ultralight non-disc front hub from Jitsie! - Developed and tested with 10-time World Champion Dani Comas. - CNC-machined from high quality 7075 aluminum. - Uses a custom designed, CNC machined shell that tapers from one end to the other to minimize weight. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit all modern forks. - Hollow alloy axle keeps weight to a minimum. - Supplied with steel bolts and lightweight alloy spacers. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with laser-etched Jitsie logos. - 28h spoke drilling only

- Jitsie's superlight HS 116mm hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only

- Lightweight but durable disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Standard 6-bolt disc mount. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Strong and affordable 116mm disc hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell. - Standard 6-bolt disc mount is compatible with all trials rotors. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- The Jitsie 108.9 freewheel is a high quality freewheel with 108 engagement points. - Forged steel construction offers great durability. - 9 steel pawls mounted in groups of 3 with 36 teeth result in 108 clicks. - Silver finish with black inner plate displaying Jitsie logo and product details. - Features stronger springs than other similar freewheels which provides more positive engagement, a louder sound and reduced bedding in time. - Four recesses in the main body allow nearly all 4-prong freewheel tools to be used. - Standard 1.37" x 24tpi thread. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.

- Lightweight but durable non-disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Innovative and uniquely designed forged stem from Jitsie. - Available in 25° and 35° angles and a variety of lengths to suit any rider and bike. - Stem body 3D forged from 7050 alloy for an optimal strength/weight ratio. - Top clamps CNC machined from 7075 T6 aluminum for maximum durability. - 31.8mm 4-bolt bar clamp allows easy installation of handlebars and keeps the bolts tucked out of the way, making it harder to hit your chest on them. - Textured grit finish on the handlebar clamp area reduces the chances of the handlebar slipping. - Laser etched markings on the bar clamps help line your bars up correctly. - Unique steerer clamp design features the bolts on the side of the stem leaving only a rounded edge at the back to help prevent painful knee injuries. - The steerer clamp is also sloping, which provides additional clearance when leaning over the bar. - High quality steel bolts on steerer and handlebar clamps offer excellent strength and reliability. - Supplied with matching sloping top cap and bolt. - Available in anodized black with white Jitsie graphics. Please note: the top two bolts on the handlebar clamp must be bottomed out gently before using the bottom two to clamp the handlebars in their final position. Failure to do this may crack the stem clamp and is not covered under warranty.

- The Jitsie riser handlebar is a lightweight aluminum bar at a great price. - Manufactured from high quality aerospace 7075 T6 aluminum. - Variable material thickness allows for an ideal weight/strength/stiffness ratio. - Width markings on edges for easy adjustment and cutting. - Central position graphics allow for an accurate set-up. - Anodized black finish with white Jitsie logos - 31.8mm oversized clamp.

- Platform pedals from Belgian brand Jitsie. - CNC machined from durable 6061-T6 aluminum. - Slight concave pedal body shape provides maximum foot/pedal contact. - 20 steel pins per pedal ensure optimal grip and confidence. - Strong, reliable steel axle with 6mm allen key fitting in the back and 15mm wrench flats for easy installation and removal. - Sealed bearings for superior durability and smooth running. - Low profile shape gives great ground clearance. - Chamfered edges help to minimize weight and deflect impacts. - Available in anodized black with laser-etched Jitsie logos. - Supplied with spare pins.

- Light, flexible long knee guards from Jitsie that ensure trustworthy knee protection without restricting movement while riding. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Available in SM/MD and LG/XL.

- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- The Jitsie Air4ce shoe combines thoughtful design and technically advanced materials to make it a top choice for trials. - Developed in close collaboration with the Jitsie factory team riders. - Features asymmetrical construction with the inner side of the ankle quite a bit higher to provide maximum protection against the cranks. - Breathable and durable upper constructed with mesh and microfiber material. - Strong laces for a tight fit and a velcro closure tab to keep them secured out of the way when riding. - Full heel-to-toe rubber sole construction is much more durable than traditional glued on soles. - Antibacterial removable inner sole. - EVA midsole provides ample cushioning to absorb big hits. - Super tacky rubber molded outsole ensures excellent grip on the pedals. - A varied tread pattern features deeper tread on the back and tip of the shoe for grip on obstacles and shallower tread under the ball of the foot for better contact with the pedal. - Additionally, the outsole is super low on the pedal contact area for a direct feel with the bike. - Loop at the back of the shoe makes it easier to slip on.

- High performance rear rotor from Jitsie. - Manufactured from Jitsie's exclusive formulated steel. - 6 bolt international standard fitting. - 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts). - Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads. - Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors. - Laser-etched logos. - Rotor bolts not included.

- Lightweight rear tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.5" size.

- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.

- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Light, flexible long knee guards from Jitsie. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Durable flexible print with Jitsie branding. - Available in SM/MD and LG/XL. The protective pads are the same size on both sizes. The difference in size comes from the material that fits around your leg. - Calf size (circumference) SM/MD: 33-40cm/13-16" - Calf size (circumference) LG/XL: 38cm+/15"+

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 20 x 2.0 size.

- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Jitsie's Barb Fitting Press makes it easy to install barb fittings in hydraulic brake lines. - Machined aluminum construction for maximum durability. - Lower clamp holds hose in place, while the upper threaded section presses the insert into the hose. - The tip of the barb driver can be flipped over to suit virtually any brake line fittings you're using.