Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Jitsie

Want to learn more about Jitsie trials bikes?

Check out our Jitsie Brand Guide

$2,749.00
- The Jitsie Varial Race 26” trials bike is one of the lightest, most capable models on the market. - Whether you’re an experienced rider or someone looking to build their skills, this model will take you to the next level. - Aluminum Varial Race frame and fork with silver Race Replica finish. - Updated frame features an innovative 12mm rear thru axle setup with integrated snail cams. - Spec'd with top quality Jitsie parts for minimal weight and the highest performance. - 1 1/8"-1 1/4" tapered fork with thru-axle for added stiffness and strength. - Jitsie stem and carbon bar provide lightweight handling precision. - Spec'd with Jitsie's high performance Race levers with Magura HS33 brake cylinders and Jitsie Race pads for ultimate braking confidence. - Wheels built up around Jitsie Race hubs, butted spokes, alloy nipples, and Jitsie's lightweight single wall rims. - Jitsie Reverz tires provide great grip in all conditions. - Uses the same proven geometry as Jitsie's Varial bikes to provide optimum control, precision, and power to the rider. - One of the lightest out of the box trials bikes on the market! Geometry - Wheelbase: 1085mm - Chainstay: 380mm - BB Height: +75mm - Head Angle: 71.5° - Reach: 660mm - Frame Spacing: 116mm
$2,649.00
- The Jitsie Varial Race 20” trials bike is one of the lightest, most capable models on the market. - The bike of choice for Junior World Champion and World Cup winner Alejandro Montalvo. - Whether you’re an experienced rider or someone looking to build their skills, this model will take you to the next level. - Aluminum Varial Race frame and fork with silver Race Replica finish. - Updated frame features an innovative 12mm rear thru axle setup with integrated snail cams. - Spec'd with the same top quality Jitsie parts Alejandro uses for minimal weight and the highest performance. - 1 1/8"-1 1/4" tapered fork with thru-axle for added stiffness and strength. - Jitsie stem and carbon bar provide lightweight handling precision. - Spec'd with Jitsie's new Race disc brakes with Jitsie Race rotors and Jitsie Race pads for ultimate braking confidence. - Wheels built up around Jitsie Race hubs, butted spokes, alloy nipples, and Jitsie's lightweight single wall rims. - Jitsie Reverz tires provide great grip in all conditions. - Uses the same proven geometry as Jitsie's Varial bikes to provide optimum control, precision, and power to the rider. - One of the lightest out of the box trials bikes on the market! Geometry - Wheelbase: 1010mm - Chainstay: 350mm - BB Height: +80mm - Head Angle: 71.5° - Reach: 600mm - Frame Spacing: 116mm
$1,549.00
- Jitsie's Varial 26" bike offers solid value and performance for beginners and advanced riders alike. - Developed and extensively tested with Jitsie’s team riders. - Spec'd with quality Jitsie parts for great value and durability. - Low overall weight makes it easier to learn and progress. - Magura hydraulic rim brakes (or front Shimano MT-400 hydraulic disc brake) provide excellent braking power. - Available in dual rim brake or rear rim/front disc brake models to suit different riding styles and preferences. - Jitsie Reverz tires provide excellent grip in all conditions. Please Note: This bike's half bashring can be set up for left or right foot forward riders. Please leave us a note in the comments during checkout which foot forward you ride with so we can set up the bashring correctly for you. Geometry - Wheelbase: 1085mm - Chainstay: 380mm - BB Height: +70mm - Head Angle: 71.5° - Reach: 660mm - Frame Spacing: 116mm
$899.00
- The smallest bike in Jitsie's Varial complete bike line is designed for the youngest aspiring trials riders. - Spec'd with quality Jitsie parts throughout for great value and durability. - 18" wheels, small frame and size specific parts help young riders learn and master the basics of trials. - Low overall weight makes it easy for kids to maneuver. - Designed for kids approximately 3ft.-4ft. tall. Geometry - Wheelbase: 740mm - Chainstay: 280mm - BB Height: +25mm - Head Angle: 71.5° - Frame Spacing: 116mm
$475.00 - $525.00
- Varial 1010 Disc frame/frame kit from Jitsie. - Manufactured from aerospace grade 6061-T6 aluminum. - Minimalistic design with focus on performance and durability. - Uses a 120mm long CNC machined headtube designed for an internal headset. - Compatible with straight 1 1/8" forks. - A large hole has been machined in the headtube to reduce weight. - CNC machined 68mm threaded bottom bracket yoke is stiff and strong. - One-piece CNC-machined post mount dropout/disc mount for increased strength and rigidity. It is compatible with 160/162.5mm rotors. - Neat CNC-machined horizontal dropouts are spaced at 116mm and feature tensioner bolts to accept snail cams. - 4-bolt bashplate design is compatible with the Jitsie Mini Bashplate, as well as Bonz and Clean bashplates, and attaches directly to the BB shell, eliminating the stress riser on the down tube caused by the forward mounting bolt on traditional 3-bolt bashplates. - Brake line guides are located on the lower side of the top tube to keep the brake line in place and out of the way. - Unique frame design allows for the Jitsie aftermarket seat to be used, giving the frame added versatility. - Comes supplied with lightweight silicon seat tube plug. - Sandblasted and anodized black finish, supplied with Jitsie frame stickers. - Sold as a frame only or frame kit. - Frame kit includes: *semi-integrated headset installed *ISIS bottom bracket installed *bash plate installed *Jitsie frame sticker kit *silicon seat plug installed Geometry: (measured with 400 x 45mm fork) - Wheelbase: 1010mm - Chainstay Length: 350mm - Bottom Bracket Rise: 80mm - Head Tube Angle: 71.5° - Head Tube Length: 120mm - Reach: 600mm
$195.00
- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.
$195.00
- Pre-built front 24" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim. - IS 6-Bolt disc mount fits many brake rotors. - 3-Cross lacing for good strength and durability. - Standard 100mm hub spacing fits a wide variety of forks.
$190.00 - $195.00
- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.
$190.00
- Pre-built front 20" disc wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim. - 3-Cross lacing for good strength and durability. - Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.
$185.00
- High quality lightweight fork as found on Jitsie complete bikes. - Developed and tested with Jitsie team riders Dani Comas and Alejandro Montalvo. - Manufactured from aerospace 7006-T6 aluminum. - 10mm CNC machined dropouts are compatible with nearly all trials hubs. - CNC machined steerer tube is internally tapered to provide extra strength without adding unnecessary weight. - 4-bolt version features CNC-machined brake mounts on the rear of the fork spaced at 85mm with extra long welds to increase durability. - Disc version features a CNC-machined Post Mount. - Ovalized fork blades give an excellent strength to weight ratio as well as a larger weld contact area at the crown. - Black anodized finish with Jitsie graphics. - Supplied without starnut. We recommend the Trialtech Large starnut. Please Note: Fork may be supplied without graphics on the fork legs.
$130.00
- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.
$115.00
- Ultralight non-disc front hub from Jitsie! - Developed and tested with 10-time World Champion Dani Comas. - CNC-machined from high quality 7075 aluminum. - Uses a custom designed, CNC machined shell that tapers from one end to the other to minimize weight. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit all modern forks. - Hollow alloy axle keeps weight to a minimum. - Supplied with steel bolts and lightweight alloy spacers. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with laser-etched Jitsie logos. - 28h spoke drilling only
$110.00
- Jitsie's superlight HS 116mm hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only
$99.00
- Lightweight but durable disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Standard 6-bolt disc mount. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.
$99.00
- Strong and affordable 116mm disc hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell. - Standard 6-bolt disc mount is compatible with all trials rotors. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.
$95.00
- The Jitsie 108.9 freewheel is a high quality freewheel with 108 engagement points. - Forged steel construction offers great durability. - 9 steel pawls mounted in groups of 3 with 36 teeth result in 108 clicks. - Silver finish with black inner plate displaying Jitsie logo and product details. - Features stronger springs than other similar freewheels which provides more positive engagement, a louder sound and reduced bedding in time. - Four recesses in the main body allow nearly all 4-prong freewheel tools to be used. - Standard 1.37" x 24tpi thread. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.
$90.00
- The Jitsie high rise handlebar is a lightweight aluminum bar at a great price. - Manufactured from high quality aerospace 7075 T6 aluminum. - Variable material thickness allows for an ideal weight/strength/stiffness ratio. - Width markings on edges for easy adjustment and cutting. - Central position graphics allow for an accurate set-up. - High rise geometry is great for high bb bikes or anyone looking for a roomier cockpit. - Anodized black finish with white Jitsie logos. - 31.8mm oversized clamp.
$85.00
- Lightweight but durable non-disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.
$85.00
- Innovative and uniquely designed forged stem from Jitsie. - Available in 25° and 35° angles and a variety of lengths to suit any rider and bike. - Stem body 3D forged from 7050 alloy for an optimal strength/weight ratio. - Top clamps CNC machined from 7075 T6 aluminum for maximum durability. - 31.8mm 4-bolt bar clamp allows easy installation of handlebars and keeps the bolts tucked out of the way, making it harder to hit your chest on them. - Textured grit finish on the handlebar clamp area reduces the chances of the handlebar slipping. - Laser etched markings on the bar clamps help line your bars up correctly. - Unique steerer clamp design features the bolts on the side of the stem leaving only a rounded edge at the back to help prevent painful knee injuries. - The steerer clamp is also sloping, which provides additional clearance when leaning over the bar. - High quality steel bolts on steerer and handlebar clamps offer excellent strength and reliability. - Supplied with matching sloping top cap and bolt. - Available in anodized black with white Jitsie graphics. Please note: the top two bolts on the handlebar clamp must be bottomed out gently before using the bottom two to clamp the handlebars in their final position. Failure to do this may crack the stem clamp and is not covered under warranty.
$85.00
- The Jitsie riser handlebar is a lightweight aluminum bar at a great price. - Manufactured from high quality aerospace 7075 T6 aluminum. - Variable material thickness allows for an ideal weight/strength/stiffness ratio. - Width markings on edges for easy adjustment and cutting. - Central position graphics allow for an accurate set-up. - Anodized black finish with white Jitsie logos - 31.8mm oversized clamp.
$80.00
- Platform pedals from Belgian brand Jitsie. - CNC machined from durable 6061-T6 aluminum. - Slight concave pedal body shape provides maximum foot/pedal contact. - 20 steel pins per pedal ensure optimal grip and confidence. - Strong, reliable steel axle with 6mm allen key fitting in the back and 15mm wrench flats for easy installation and removal. - Sealed bearings for superior durability and smooth running. - Low profile shape gives great ground clearance. - Chamfered edges help to minimize weight and deflect impacts. - Available in anodized black with laser-etched Jitsie logos. - Supplied with spare pins.
$75.00
- Light, flexible long knee guards from Jitsie that ensure trustworthy knee protection without restricting movement while riding. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Available in SM/MD and LG/XL.
$75.00
- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.
$70.00 $110.00 36% Off
- The Jitsie Air4ce shoe combines thoughtful design and technically advanced materials to make it a top choice for trials. - Developed in close collaboration with the Jitsie factory team riders. - Features asymmetrical construction with the inner side of the ankle quite a bit higher to provide maximum protection against the cranks. - Breathable and durable upper constructed with mesh and microfiber material. - Strong laces for a tight fit and a velcro closure tab to keep them secured out of the way when riding. - Full heel-to-toe rubber sole construction is much more durable than traditional glued on soles. - Antibacterial removable inner sole. - EVA midsole provides ample cushioning to absorb big hits. - Super tacky rubber molded outsole ensures excellent grip on the pedals. - A varied tread pattern features deeper tread on the back and tip of the shoe for grip on obstacles and shallower tread under the ball of the foot for better contact with the pedal. - Additionally, the outsole is super low on the pedal contact area for a direct feel with the bike. - Loop at the back of the shoe makes it easier to slip on.
$70.00
- High performance rear rotor from Jitsie. - Manufactured from Jitsie's exclusive formulated steel. - 6 bolt international standard fitting. - 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts). - Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads. - Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors. - Laser-etched logos. - Rotor bolts not included.
$68.00
- Lightweight rear tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.5" size.
$65.00
- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.
$65.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.
$65.00
- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$65.00
- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$55.00 - $60.00
- Light, flexible long knee guards from Jitsie. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Durable flexible print with Jitsie branding. - Available in SM/MD and LG/XL. The protective pads are the same size on both sizes. The difference in size comes from the material that fits around your leg. - Calf size (circumference) SM/MD: 33-40cm/13-16" - Calf size (circumference) LG/XL: 38cm+/15"+
$60.00
- Lightweight full bashring from Jitsie. - As found on their Varial Hybrid bike. - CNC machined from super strong 7075 T6 aluminum. - Asymmetric design provides full protection while reducing unnecessary material where it isn't needed. - Machined cutout further reduces weight. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Black anodized finish with laser etched Jitsie logos.
$60.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 20 x 2.0 size.
$60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
$60.00
- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$60.00
- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$55.00
- Jitsie's Barb Fitting Press makes it easy to install barb fittings in hydraulic brake lines. - Machined aluminum construction for maximum durability. - Lower clamp holds hose in place, while the upper threaded section presses the insert into the hose. - The tip of the barb driver can be flipped over to suit virtually any brake line fittings you're using.
$55.00
- The Jitsie brake clamps are an innovative CNC component from the Belgian manufacturer. - CNC-machined from quality 7075 alloy. - Designed to be used without plastic cylinder washers to improve clamping power and ease of installation. - Clamps feature different heights - 7mm and 9mm. This can be very useful when your frame or fork has very low-profile brake mounts. The clamps can be mounted either side up to adjust how far the cylinders sit above the frame. - Designed and manufactured in Belgium as part of the Jitsie Race range.
$55.00
- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$50.00
- The Jitsie Dynamic shinguards are innovative lightweight protectors made with the rider in mind. - The 'less-is-more' concept applied throughout the development process has resulted in a great shinguard that sets the standard in bike trial! - Developed and tested with Jitsie Team riders such as Dani Comas. - Constructed with lightweight flexible fabrics for an unrestricted feeling on the bike. - Mesh panel on the rear of the guard for optimal ventilation. - Updated with a lightweight memory foam panel inside a pocket in the shinguard that provides secure protection without being bulky. - Foam panel is removable to allow for easy washing. - High quality lycra and mesh fabrics provide a snug, comfortable, and secure fit. - Available in SM/MD and LG/XL adult sizes that use a 26cm long dense foam plate that protects the most vulnerable areas of the shin. - The Youth size is fitted for small legs (typically under age 11) and features a 20cm long protective plate that is also a bit narrower than the adult size. - Elastic cuffs keep the shinguard nicely in place while riding. - Super light, they are very minimal and easily fit under pants or over tights.
$45.00 - $50.00
- Excellent value forged stems from Jitsie. - Available in 35° angle and a variety of lengths to suit any rider and bike. - 3D forged from 6061 alloy for an optimal strength/weight ratio. - 4-bolt bar clamp allows easy installation of handlebars. - Steerer clamp features rounded edges to help prevent knee injuries. - High quality M6 bolts on steerer and handlebar clamps offer excellent strength and reliability. - 31.8mm oversized clamp. - Available in anodized black with white Jitsie graphics.
$46.00 - $50.00
- Internal headset from Jitsie as found on their complete bikes. - Sealed bearing design keeps out dirt and grit for smooth running. - Aluminum cups reduce weight without sacrificing durability. - Split crown race for easy installation and removal. - Black anodized finish with laser-etched Jitsie logos. - Available in straight 1 1/8" and tapered 1 1/8"-1.5" sizes. - 1 1/8" fits frames with a 44mm internal diameter headtube with a standard 1 1/8" fork. - 1 1/8-1.5" fits frames with a 44mm internal upper diameter and 56mm internal lower with tapered 1 1/8-1.5" forks. - Star nut and top cap not included.
$48.00
- High performance CNC rim brake pads from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - Glued to Jitsie's newly designed CNC backing, which is shaped to provide a precise fit with the brake caliper to eliminate the pad "knock" often found with plastic-backed pads. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - Compatible with all hydraulic rim brake systems on the market including Magura, Echo, and Racing Line. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair. Please Note: Due to the super stiff characteristics of the metal backings, it is important to set up these pads so that they are completely square with the rim. Otherwise they will wear unevenly, leading to decreased brake performance and pad life.
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
$38.00
- Lightweight half bashring from Jitsie. - Designed and developed with World Champion Dani Comas. - CNC machined from 7075 T6 aluminum. - Asymmetric width for optimal protection while decreasing weight as much as possible. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Laser etched Jitsie logo.
$38.00
- The Jitsie snail cams are lightweight, high quality chain tensioners. - Innovative, asymmetrical shape allows for precise chain tension. - CNC machined from 7075 T6 aluminum. - Design based on snail cams used in motorcycle trials with multiple cut outs in the shape to drop as much weight as possible without sacrificing durability and strength. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Laser-etched Jitsie logos.
$36.00
- The Jitsie G2 Solid glove is a lightweight glove designed specifically for perfect control and comfort in trials. - Stitchless palm design prevents bunching and irritation when the hand is wrapped around the handlebar. - Clarino©? palm material provides exceptionally tactile feel for superior control and comfort. - Flexible mesh upper portion and stretch panels on the sides of the fingers give the glove a very airy feel and allow for excellent freedom of movement. - Soft moisture wicking fabric on thumb to wipe sweat. - Slim embossed cuff with minimal velcro closure tab keeps the gloves secure on your hand. - Patch on the thumb provides additional reinforcement and adds durability to this high stress area that often wears out on non-trials gloves.
$35.00
- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.
$30.00
- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.
$26.00 - $28.00
- Affordable and durable steel threaded cogs from Jitsie. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide base gives a strong connection between the sprocket and hub/crank. - Made from heat-treated steel - Compatible with all 1/8" and 3/32" chains. - 12t-14t are offset, 15t is centered.
$26.00
- Replacement pedal cage for Jitsie Single Cage pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - Available in anodized black only. - Sold as a pair.
$26.00
- The Jitsie Race brake pads set the standard when it comes to braking power. - Metal ceramic sintered pad material. - Equally powerful in dry and wet conditions. - Copper backing plate improves pad contact with piston to help reduce pad "knock". - After extensive testing by the Jitsie team, many riders have found these to out-perform all other Trial Zone pads, including the Hope Pro pads! - Available to fit Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes, Jitsie Race disc brakes, Magura MT5/MT7 or MT2 brakes and Shimano MT400 brakes. - Pad retention pin and clip not included.
$18.00
- High performance CNC rim brake pad refills from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair.
$16.00
- Inexpensive replacement pads for Hope and Echo disc brakes. - Fits Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes. - Organic pad material offers good performance in both dry and wet conditions. - Steel back plate for maximum durability. - Great for replacing contaminated or worn out pads. - Pad retention pin and clip not included. - Sold as a pair.
$15.00
- An innovative product that helps protect your legs when you hit them on your lever clamps! - Helps lessen the impact of hitting the legs on the lever clamps during riding. - Made of lightweight yet durable material. - Held in place by two velcro straps. - Compatible with all brake levers. - Sold as a pair.
$10.00 - $13.00
- The Jitsie rubber grips offer great performance for even the most demanding riders. - Durable single layer rubber compound with grippy knurled design for optimal grip. - Jitsie print detail on end of each grip. - Rubber ends help protect bar from damage. Please Note: the clear rubber compound is softer and a bit lighter than the other colors, so if you're looking for comfort or are concerned with weight, we recommend the clear grips.
$12.00
- Super light axle bolt washers as found on Jitsie's Race hubs. - Manufactured from high quality 7075 aluminum alloy. - Ideal for replacing any washers that have been damaged during riding. - Slight indents in the inner surface help prevent the wheel from moving in the dropout. - Fits all standard M6 bolts. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with Jitsie laser etched logo. - 19mm head diameter. - Sold as a pair.
$11.00
- The Jitsie foam grips provide great control and comfort on the bike. - Super lightweight and also very comfortable. - Dense foam/rubber compound gives a good mixture of comfort and durability. - Includes handlebar plugs with Jitsie print detail.
$7.00 - $9.00
- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.
$3.25
- Spare hub axle spacers from Belgian brand Jitsie. - CNC machined from high quality aluminum. - Designed to work with Jitsie hubs, may also work with other brands. - Narrower side of spacer rests against hub bearing. - Available in 2mm, 3mm, and 5mm widths. - All sizes have a 10mm inner diameter and 16mm outer diameter. - Anodized black only. - Sold individually.
Page 1 of 1