Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Jitsie

$48.00
- High performance CNC rim brake pads from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - Glued to Jitsie's newly designed CNC backing, which is shaped to provide a precise fit with the brake caliper to eliminate the pad "knock" often found with plastic-backed pads. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - Compatible with all hydraulic rim brake systems on the market including Magura, Echo, and Racing Line. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair. Please Note: Due to the super stiff characteristics of the metal backings, it is important to set up these pads so that they are completely square with the rim. Otherwise they will wear unevenly, leading to decreased brake performance and pad life.
$30.00
- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.
$55.00
- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$38.00
- Lightweight half bashring from Jitsie. - Designed and developed with World Champion Dani Comas. - CNC machined from 7075 T6 aluminum. - Asymmetric width for optimal protection while decreasing weight as much as possible. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Laser etched Jitsie logo.
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
$70.00 $110.00 36% Off
- The Jitsie Air4ce shoe combines thoughtful design and technically advanced materials to make it a top choice for trials. - Developed in close collaboration with the Jitsie factory team riders. - Features asymmetrical construction with the inner side of the ankle quite a bit higher to provide maximum protection against the cranks. - Breathable and durable upper constructed with mesh and microfiber material. - Strong laces for a tight fit and a velcro closure tab to keep them secured out of the way when riding. - Full heel-to-toe rubber sole construction is much more durable than traditional glued on soles. - Antibacterial removable inner sole. - EVA midsole provides ample cushioning to absorb big hits. - Super tacky rubber molded outsole ensures excellent grip on the pedals. - A varied tread pattern features deeper tread on the back and tip of the shoe for grip on obstacles and shallower tread under the ball of the foot for better contact with the pedal. - Additionally, the outsole is super low on the pedal contact area for a direct feel with the bike. - Loop at the back of the shoe makes it easier to slip on.
$45.00 - $50.00
- Excellent value forged stems from Jitsie. - Available in 35° angle and a variety of lengths to suit any rider and bike. - 3D forged from 6061 alloy for an optimal strength/weight ratio. - 4-bolt bar clamp allows easy installation of handlebars. - Steerer clamp features rounded edges to help prevent knee injuries. - High quality M6 bolts on steerer and handlebar clamps offer excellent strength and reliability. - 31.8mm oversized clamp. - Available in anodized black with white Jitsie graphics.
$7.00 - $9.00
- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.
$60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
$10.00 - $13.00
- The Jitsie rubber grips offer great performance for even the most demanding riders. - Durable single layer rubber compound with grippy knurled design for optimal grip. - Jitsie print detail on end of each grip. - Rubber ends help protect bar from damage. Please Note: the clear rubber compound is softer and a bit lighter than the other colors, so if you're looking for comfort or are concerned with weight, we recommend the clear grips.
$2,749.00
- The Jitsie Varial Race 26” trials bike is one of the lightest, most capable models on the market. - Whether you’re an experienced rider or someone looking to build their skills, this model will take you to the next level. - Aluminum Varial Race frame and fork with silver Race Replica finish. - Updated frame features an innovative 12mm rear thru axle setup with integrated snail cams. - Spec'd with top quality Jitsie parts for minimal weight and the highest performance. - 1 1/8"-1 1/4" tapered fork with thru-axle for added stiffness and strength. - Jitsie stem and carbon bar provide lightweight handling precision. - Spec'd with Jitsie's high performance Race levers with Magura HS33 brake cylinders and Jitsie Race pads for ultimate braking confidence. - Wheels built up around Jitsie Race hubs, butted spokes, alloy nipples, and Jitsie's lightweight single wall rims. - Jitsie Reverz tires provide great grip in all conditions. - Uses the same proven geometry as Jitsie's Varial bikes to provide optimum control, precision, and power to the rider. - One of the lightest out of the box trials bikes on the market! Geometry - Wheelbase: 1085mm - Chainstay: 380mm - BB Height: +75mm - Head Angle: 71.5° - Reach: 660mm - Frame Spacing: 116mm
$65.00
- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$85.00
- Innovative and uniquely designed forged stem from Jitsie. - Available in 25° and 35° angles and a variety of lengths to suit any rider and bike. - Stem body 3D forged from 7050 alloy for an optimal strength/weight ratio. - Top clamps CNC machined from 7075 T6 aluminum for maximum durability. - 31.8mm 4-bolt bar clamp allows easy installation of handlebars and keeps the bolts tucked out of the way, making it harder to hit your chest on them. - Textured grit finish on the handlebar clamp area reduces the chances of the handlebar slipping. - Laser etched markings on the bar clamps help line your bars up correctly. - Unique steerer clamp design features the bolts on the side of the stem leaving only a rounded edge at the back to help prevent painful knee injuries. - The steerer clamp is also sloping, which provides additional clearance when leaning over the bar. - High quality steel bolts on steerer and handlebar clamps offer excellent strength and reliability. - Supplied with matching sloping top cap and bolt. - Available in anodized black with white Jitsie graphics. Please note: the top two bolts on the handlebar clamp must be bottomed out gently before using the bottom two to clamp the handlebars in their final position. Failure to do this may crack the stem clamp and is not covered under warranty.
$60.00
- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$65.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.
$50.00
- The Jitsie Dynamic shinguards are innovative lightweight protectors made with the rider in mind. - The 'less-is-more' concept applied throughout the development process has resulted in a great shinguard that sets the standard in bike trial! - Developed and tested with Jitsie Team riders such as Dani Comas. - Constructed with lightweight flexible fabrics for an unrestricted feeling on the bike. - Mesh panel on the rear of the guard for optimal ventilation. - Updated with a lightweight memory foam panel inside a pocket in the shinguard that provides secure protection without being bulky. - Foam panel is removable to allow for easy washing. - High quality lycra and mesh fabrics provide a snug, comfortable, and secure fit. - Available in SM/MD and LG/XL adult sizes that use a 26cm long dense foam plate that protects the most vulnerable areas of the shin. - The Youth size is fitted for small legs (typically under age 11) and features a 20cm long protective plate that is also a bit narrower than the adult size. - Elastic cuffs keep the shinguard nicely in place while riding. - Super light, they are very minimal and easily fit under pants or over tights.
$190.00
- Pre-built front 20" disc wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim. - 3-Cross lacing for good strength and durability. - Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.
$75.00
- Light, flexible long knee guards from Jitsie that ensure trustworthy knee protection without restricting movement while riding. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Available in SM/MD and LG/XL.
$190.00 - $195.00
- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.
$130.00
- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.
$195.00
- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.
$60.00
- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$55.00
- Jitsie's Barb Fitting Press makes it easy to install barb fittings in hydraulic brake lines. - Machined aluminum construction for maximum durability. - Lower clamp holds hose in place, while the upper threaded section presses the insert into the hose. - The tip of the barb driver can be flipped over to suit virtually any brake line fittings you're using.
$475.00 - $525.00
- Varial 1010 Disc frame/frame kit from Jitsie. - Manufactured from aerospace grade 6061-T6 aluminum. - Minimalistic design with focus on performance and durability. - Uses a 120mm long CNC machined headtube designed for an internal headset. - Compatible with straight 1 1/8" forks. - A large hole has been machined in the headtube to reduce weight. - CNC machined 68mm threaded bottom bracket yoke is stiff and strong. - One-piece CNC-machined post mount dropout/disc mount for increased strength and rigidity. It is compatible with 160/162.5mm rotors. - Neat CNC-machined horizontal dropouts are spaced at 116mm and feature tensioner bolts to accept snail cams. - 4-bolt bashplate design is compatible with the Jitsie Mini Bashplate, as well as Bonz and Clean bashplates, and attaches directly to the BB shell, eliminating the stress riser on the down tube caused by the forward mounting bolt on traditional 3-bolt bashplates. - Brake line guides are located on the lower side of the top tube to keep the brake line in place and out of the way. - Unique frame design allows for the Jitsie aftermarket seat to be used, giving the frame added versatility. - Comes supplied with lightweight silicon seat tube plug. - Sandblasted and anodized black finish, supplied with Jitsie frame stickers. - Sold as a frame only or frame kit. - Frame kit includes: *semi-integrated headset installed *ISIS bottom bracket installed *bash plate installed *Jitsie frame sticker kit *silicon seat plug installed Geometry: (measured with 400 x 45mm fork) - Wheelbase: 1010mm - Chainstay Length: 350mm - Bottom Bracket Rise: 80mm - Head Tube Angle: 71.5° - Head Tube Length: 120mm - Reach: 600mm
$35.00
- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.
$12.00
- Super light axle bolt washers as found on Jitsie's Race hubs. - Manufactured from high quality 7075 aluminum alloy. - Ideal for replacing any washers that have been damaged during riding. - Slight indents in the inner surface help prevent the wheel from moving in the dropout. - Fits all standard M6 bolts. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with Jitsie laser etched logo. - 19mm head diameter. - Sold as a pair.
$26.00
- Replacement pedal cage for Jitsie Single Cage pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - Available in anodized black only. - Sold as a pair.
$55.00 - $60.00
- Light, flexible long knee guards from Jitsie. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Durable flexible print with Jitsie branding. - Available in SM/MD and LG/XL. The protective pads are the same size on both sizes. The difference in size comes from the material that fits around your leg. - Calf size (circumference) SM/MD: 33-40cm/13-16" - Calf size (circumference) LG/XL: 38cm+/15"+
$26.00 - $28.00
- Affordable and durable steel threaded cogs from Jitsie. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide base gives a strong connection between the sprocket and hub/crank. - Made from heat-treated steel - Compatible with all 1/8" and 3/32" chains. - 12t-14t are offset, 15t is centered.
$26.00
- The Jitsie Race brake pads set the standard when it comes to braking power. - Metal ceramic sintered pad material. - Equally powerful in dry and wet conditions. - Copper backing plate improves pad contact with piston to help reduce pad "knock". - After extensive testing by the Jitsie team, many riders have found these to out-perform all other Trial Zone pads, including the Hope Pro pads! - Available to fit Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes, Jitsie Race disc brakes, Magura MT5/MT7 or MT2 brakes and Shimano MT400 brakes. - Pad retention pin and clip not included.
Page 1 of 2 Next page