Salsa

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Single Frame Plug for Dropper Routing

Alternator 1.0 Set Screws

Frame Plugs for Internal Cable Routing

Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard

Chainstay protectors to guard your Salsa frame from scratches and damage.

Salsa springs for Flip-Off skewers

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips

Salsa Pivot Service Kits

Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.

Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length

Custom Cane Creek lower race for Salsa.

Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger - Lightweight aluminum bolt - For all Salsa Split Pivot suspension models - Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger - Operated via 6mm hex key found on most mini tools - Takes place of standard top cap - Eliminates the need to carry a 22mm wrench or socket in your pack - Lightweight, black anodized aluminum bolt included - 13g

- Grip tapers up towards the lock-ring for comfort and security - Single-sided lock-on collar - 134mm overall length including the locking collar - Only Compatible with Salsa Lock-on Collars - Grip only, no lock rings. - For replacement use

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

- Anything Cradle Straps are the perfect width for Salsa's Anything Cradle, but can also be used to strap stuff down on racks or wherever the heck you want to strap stuff. - They cinch tight but easily release tension with a push of the buckle. - Carry a couple with you for your planned or unplanned strapping needs. - Materials - 25mm nylon webbing, Duraflex hardware.

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

Protect your downtube from scratches and damage with Salsa protectors.

Your feet are one of only three contact points on your bike—don’t they deserve to be happy? These comfortable, breathable socks are sure to satisfy on even the longest rides. - Made with ultra-wicking, breathable fabric to keep dry - 8" cuff - Sizes: SM/MD and LG/XL - Matches Salsa Latitude bib short, jerseys, vest, cap, and bottles

Front Derailleur Mount for specific Salsa frame models. - Derailleur Mount Required for Direct Mount Front Derailleurs - Salsa Road Boost Front Derailleur Mount for 148 mm rear hub spacing - Enables installation of a braze-on front derailleur - Offset for 148 mm rear hub spacing - Replacement part for Cutthroat v2 frames - Wrap-around design provides additional derailleur stability - Interfaces with derailleur support bolt

Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 1798

Replacement derailleur hangers for Salsa frames.

Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 559

Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 687

Replacement derailleur hangers for Salsa frames.

Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose