Ski Bindings

Specific flexor for Salomon Prolink Race Classic and Prolink Pro Classic bindings with 85 flex index to provide best balance between control and freedom of movement. Sold as a pair.

As the name says....this is the Flexor for the Salomon Prolink Shift Classic binding. Sold as a pair

These are the little rubber bumpers used on Salomon Prolink Skate bindings. 115 flex.

- The handy IFP adaptor plate enables you to mount any SNS or Prolink binding on IFP skis. - Compatible with all IFP skis except Fischer Speedmax 3D. - Sold as a pair.

The Salomon Propulse Flexor for Salomon Propulse bindings, RS10. Sold in pairs

Every now and then, someone breaks one of these things. They come as a pair.....They fit the Salomon Race Pro bindings.

- These nifty mounting plates from Rottefella allow you to mount Rottefella NIS bindings to all Salomon and Atomic skis with pre-drilled mounting holes. - They can be mounted on both skin skis and skis requiring wax, and give you the ability to adjust grip and glide without rewaxing. - Move the binding forward on the mounting plate for better grip and towards the back for better glide. - Sold as a pair for two skis. - Includes plates and mounting screws.

- Rottefella's Xcelerator mounting plate makes it possible to mount Xcelerator bindings on either regular cross-country skis without the NIS plate or roller skis. - Offers three positions to mount the binding. - On roller skis, you do not have to move the rear wheel to mount the binding using a mounting plate. - Available in black - Includes plates and mounting screws.

- Wider profile than the standard guide ridges helps prevent snow and ice buildup on the NIS plate. - Compatible with all Salomon SNS Pilot bindings. - Sold as a pair.

- The Fischer Screw Mount Plate allows you to use an IFP Turnamic binding on flat skis. - Simply mount the plate and slide on the binding. - Compatible with Fischer and Rossignol Turnamic skate and classic bindings. - Supplied with mounting screws. - Sold as a pair.

- Toe bumpers for Rottefella Xcelerator and Quicklock classic bindings. - Available in three stiffnesses with different rubber colors: Soft (red or grey), Medium (black), and Hard (blue or grey). - Soft is recommended for skiers under 110lbs/50kg. - Hard is recommended for skiers over 190lbs/86kg. - Sold as a pair.

- Toe bumpers for Rottefella Xcelerator and SSR skate bindings. - Available in three stiffnesses with different rubber colors: Soft (red or grey), Medium (black), and Hard (blue or grey). - Soft is recommended for skiers under 110lbs/50kg. - Hard is recommended for skiers over 190lbs/86kg. - Sold as a pair.

- The Salomon Prolink Shift Plate fits Salomon pre-drilled, five-hole skis. - Simply mount the plate and slide in the Shift binding. - Compatible with Salomon Prolink Shift Pro or Prolink Shift Race classic bindings. - Supplied with mounting screws. - Sold as a pair.

Fits Salomon Prolink bindings (both classic bindings and skate bindings). Pair.

- Affordable binding from Fischer for young skiers. - Suitable for skate or classic use. - Very soft flex, recommended for children 80lbs and below. - Large, easy to grasp locking handle. - Not compatible with NIS plates, standard screw mount only. - Sold as a pair.

An easy to use binding for Prolink®, NNN® and Turnamic® boots. Easy on, easy off, easy to ski. PROLINK AUTO is worry-free.

- Lightweight classic binding from Salomon. - Minimal lift, minimal material and simple mechanics keep the weight down. - Close to the snow platform lets you feel more of what is under your feet for better control. - Prolink's 2 rail system puts your power right next to the ski, for maximum transmission and feel. - Easy to use entry and release handle. - Prolink system is Compatible with Prolink®, NNN®, and Turnamic® boots. - Available in black only. - Sold as a pair.

- Lightweight skate binding from Salomon. - Minimal lift, minimal material and simple mechanics keep the weight down. - Close to the snow platform lets you feel more of what is under your feet for better control. - Prolink's 2 rail system puts your power right next to the ski, for maximum transmission and feel. - Easy to use entry and release handle. - Prolink system is Compatible with Prolink®, NNN®, and Turnamic® boots. - Available in black only. - Sold as a pair.

The Fischer Xcelerator Junior is the binding for young, ambitious skiers. It has the same unique technology as Xcelerator for adults, including low weight, interchangeable flex and a precise locking mechanism. Juniors will also appreciate the improved grip, for easy opening with or without gloves. With Xcelerator, your body stays in a more upright position, giving you more power, more speed and a better grip. You don’t need to be grown up to enjoy it. - Compatible with NIS mounting plates. - Flex hardness 30 ShA - Fits boot sizes 33-42

Junior race binding for classic use: ideally suited for young professionals thanks to high control over the ski, as well as top stability and power transmission. The possibility of individual adjustment in a matter of seconds corresponds entirely to the characteristics of a professional binding in the World Cup.

Junior race binding for classic use: ideally suited for young professionals thanks to high control over the ski, as well as top stability and power transmission. The possibility of individual adjustment in a matter of seconds corresponds entirely to the characteristics of a professional binding in the World Cup.

Junior race binding for skating use. Ideally suited for the young professionals thanks to high control over the ski, as well as top stability and power transmission. The possibility of individual customization within seconds fully corresponds to the characteristics of a professional binding in the World Cup.

- Lightweight junior race skate binding from Fischer. - Uses Fischer's completely redesigned Turnamic binding system. - Individual adjustments are possible within a matter of seconds without any tools. - Sliding the binding forward provides more stability, while sliding it back will noticeably improve glide. - Locking clip for easy and safe fixation and adjustment of the binding on the IFP (Integrated Fixation Plate). - Adjustable heel section where the boot size is pre-selected using snap hooks on the heel rails. - Low profile binding height ensures a low standing position and maximum stability. - Broad contact surface and torsionally stiff geometry provides direct power transfer. - Ergonomically designed Turn Lock lever with secure-grip components enables intuitive handling when stepping in and out of the binding.

Junior race binding for skating use. Ideally suited for the young professionals thanks to high control over the ski, as well as top stability and power transmission. The possibility of individual customization within seconds fully corresponds to the characteristics of a professional binding in the World Cup.

The high-stability touring binding Control Step-In allows easy and fast tool-free adjustments of the binding position to match terrain and conditions. A redesigned flexor allows for easier step-in entry. The bindings quickly slide onto the plate without the use of tools. When it’s time to ski, the Turn Lock mechanism can be operated even with a gloved hand, making entry and exit easier than ever before. Technique, temperature and snow composition all have an influence on ski performance: With all TURNAMIC® models, this completely tool free adjustment allows skiers to better match their individual needs. Sliding the system forward provides more grip, while sliding it back will noticeably improve glide. With the optimized setup of the boot-binding-plate-ski components, TURNAMIC® gives you dynamic skiing performance like never before. FLOWFLEX® technology enables the ski to flex freely. The more easygoing skier appreciates perfect control.

- Ergonomic moveable classic binding from Salomon. - The Pro lever protects the shift button while making it easy to unlock even with gloves on. - Let the clicking sound guide it to the position you want and close the lever. - Shift the binding forward for more grip, backward for more glide or keep it in the “0” position for the best of both worlds. - Easy to use entry and release handle. - Mounts to the Salomon Prolink Shift Plate, which comes pre-installed on many new Salomon skis but is also sold separately. - Compatible with Prolink®, NNN®, Turnamic® boots. - Available in black only.

Easy to use affordable binding from Rottefella. - NIS compatible. - Flex hardness 60 ShA. - Lever/hook system contains no moving parts, cams or springs for improved durability. - Two hooks that engage the bar on the sole of the boot provide a secure grip. - Fits boot sizes 35-52. - Available in black/white.

Rottefella Xcelerator 2.0's unique construction and low weight gives you more power and improved speed. The binding's low profile also secures maximum control in the track. The NIS key (included) allows you to move the binding to the desired position – forwards for better control or backwards for more speed. These fit NIS Plates (old Fischers, Old Rossis, Madshus, and if you have flat skis, you can mount an NIS plate to your skis)

- Rottefella's Xcelerator 2.0 Skate bindings are lightweight race bindings. - Reduced weight and added strength compared to previous versions. - Compatible with NNN nordic boots sizes 36-52. - Fits skis with NIS plates. - Sold as a pair.

- Despite the ridiculously-long name, this binding from Voile is as simple as a telemark binding can get. - Consists of a 75mm Nordic Norm toe piece that mounts directly to the the ski and a barebones heel pad. - Toe box is constructed of 5052-H32 aluminum and machined almost identically to Voile's other 3-Pin Cable bindings. - More suited to covering distance than making turns but still plenty strong. - Thrives when snuggled up against the duckbill of a leather boot. - Ideal for light touring in rolling terrain. - Made in USA.