Trials Bikes & Gear

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.

- The Inspired Arcade handlebar is the choice of top street trials riders the world over! - Developed and tested in collaboration with team riders Ali C and Sean Watson as part of the Arcade bike development. - High rise geometry gives it a more rise than standard riser bars and really help it to ‘pop’ - perfect for bunny hops, manuals and spins! - 730mm width gives plenty of leverage over the bike meaning you can pick it up and move it around easily and benefit from a better level of control than with narrower bars. - 9 degree back sweep and 5 degree up sweep give a slightly more traditional shape, which many riders find more comfortable. - Extruded from 7050-T6 aluminum, they feature multi-taper wall thicknesses to increase strength in high stress areas without adding any excessive weight. - 31.8mm oversize clamp diameter for increased strength in the center of the bar. - Available in matte black or silver anodized finish with high resolution Inspired graphics.

- Classic 19" rear trials tire from Maxxis. - Designed specifically for trials use with input from World Champion Dani Comas. - Super Tacky rubber compound provides good grip while also maintaining good durability. - Traditional block style tread is designed to work in both directions. - Wire bead. - Available in 19 x 2.5 size. Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.

- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!

- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).

- Replacement derailleur hangers for older Monty frames. - Hydra hanger includes mounting screws, hangers 1 and 2 include mounting bolts (not pictured).

- Velcro fastening for quick and easy fitting. - Made from neoprene, highly rip and tear resistant, the best material for the job. - Length and depth designed specifically to fit Inspired chainstays perfectly but will also fit other frames. - Double stitching at each end of the velrco strips ensures maximum life. - Large and durable screen printed XL Inspired logo. - 185mm length. - Available in black with white or fluro yellow logo.

- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.

- High quality sealed rear disc hub from Trialtech. - 135mm spacing, to fit the majority of modern trials and street frames. - International standard 6-Bolt disc fitting. - Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in. - Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard). - Serrated end caps and bolt washers help keep the bolts tight and the hub in place. - CNC machined aluminium shell. - 32h drilling. - Available in gloss black with laser etched Trialtech 'bashring' logo.

- The Inspired Flow 24" street trials bike offers great value for money for new and experienced riders alike. - Refined geometry gives riders of all experience levels and cycling backgrounds the opportunity to progress their riding ability and broaden their bike handling skills. - Short chainstays and compact front triangle mean you get a bike that both bunnyhops and spins very well and also offers a stable feel for manuals. - 73 degree head angle and short offset forks help with more advanced front wheel based moves. - Frame made from high quality 6061 aluminum. - Durable steel Flow forks feature oversized legs and dropouts which also help to increase durability. - Compact horizontal dropouts designed to work specifically with a 22:16 (fitted as standard) gear ratio. - Frame and fork feature IS disc mounts for use with disc brakes (maximum rotor size 185mm). - Avid BB5 brake calipers and FR5 brake levers make up a simple, reliable and effective braking system. - Built with a solid range of Inspired and Trialtech products. - Also available with Magura MT4, or Magura MT7, HC3 Blade or Hope Tech 3 Trial Zone disc brake upgrade options. - Available in Gloss Acid Green only. Geometry - Wheelbase: 1010mm - Chainstays: 375mm - BB Height: +15mm - Head Angle: 73° - Frame Spacing: 135mm

- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.

- Internal tapered headset from Crewkerz as found on their complete bikes. - Sealed bearing design keeps out dirt and grit for smooth running. - Aluminum cups reduce weight without sacrificing durability. - Fits Crewkerz frames using an internal headset with a tapered 1 1/8" - 1.5" fork. - May also fit other frames using a tapered internal headset with 44mm diameter upper cup with 56mm diameter lower cup. - Does not include a crown race (Crewkerz forks have an integrated crown race and do not require a separate race). - Not supplied with starnut or top cap. - Black anodized finish. Please Note: These may be supplied with a slightly different appearance than the photos.

- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Single half link from KMC. - The half link is an outer link that reduces to an inner link, making it half the length of a normal link. - Very useful for getting chain length or gearing just right. - Available to fit 1/8" or 3/32" chains. - Grey finish.

- Designed for street riding use, the Team rim offers an excellent strength to weight ratio. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Double wall construction offers good strength and stiffness. - 20mm holes drilled in the rim help to reduce weight. - 36mm wide profile helps to prevent tire roll when compared to similar rims available. - Matte white powder coat finish with black logos. - Available in 32h spoke drilling only.

- Replacement steel bolt. - M5 x 25mm size. - 4mm allen key head. - Ideal for brake clamp bolts (without brake booster). - Sold singly.

- Replacement TPA Bushings from Racing Line. - Bushings sit on both sides of TPA wheel to hold it in place. - Fits 2005-2010 Magura HS33 and Racing Line levers. - Sold as a pair (for one brake).

- Replacement steel bolt - M6 x 25mm size - 5mm allen key head - Ideal for hub axle bolts - Sold singly

- A replacement 4-finger lever for Racing Line brake levers. - Longer lever provides more power over traditional 2-finger levers. - CNC'd from 6061 T6 aluminum. - 6mm pivot bolt hole fits Racing Line brake levers only, will not fit Magura levers. - Available in anodized black only. - TPA wheel and pin sold separately.

- Durable double wall rim from Inspired. - As fitted to the Inspired Flow bikes. - Double wall, high quality aluminum construction for maximum strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 32mm wide profile. - Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes. - Black anodized finish with laser etched Inspired logo. - 32h spoke drilling only.

- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.

- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.

- Replacement slave cylinders from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders. - Compatible with Magura, Echo, and Racing Line brakes. - Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride. - Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version. - Available in anodized black, sold individually or in pairs.

- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.

- The Inspired Pro V2 rim offers excellent strength and value. - Updated V2 version tested and proven by John Langlois. - Double wall angular profile for increased strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 36mm width gives good anti-roll performance even at low tire pressures. - Available in gloss black anodized finish with white 'Inspired' graphics. - For use with disc brakes only. - 32h spoke drilling only. - Not tubeless compatible.

- Replacement stem bolts for Echo stems. - M6 x 20mm size. - Fitted for 5mm allen key. - May also fit other stems. - Available in steel with black or silver finish or titanium.

- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.