Filter By:
- Complete Trials Bikes (13)
- Frames (13)
- Forks (8)
- Drivetrain (58)
- Steering (28)
- Braking (68)
- Wheels (62)
- Clothing and Protection (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Trials Bikes & Gear
$65.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo.
- Good mix of durability and performance.
- Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance.
- Tire is designed to work in both directions.
- Super sticky lightweight rubber compound ensures maximum grip.
- Low block tread design helps save weight.
- Generous spacing between center and outer knobs helps shed mud.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Wire bead.
- Jitsie logos and product info on tire.
- Available in 19 x 2.6 size.
$110.00
- The Inspired Arcade handlebar is the choice of top street trials riders the world over!
- Developed and tested in collaboration with team riders Ali C and Sean Watson as part of the Arcade bike development.
- High rise geometry gives it a more rise than standard riser bars and really help it to ‘pop’ - perfect for bunny hops, manuals and spins!
- 730mm width gives plenty of leverage over the bike meaning you can pick it up and move it around easily and benefit from a better level of control than with narrower bars.
- 9 degree back sweep and 5 degree up sweep give a slightly more traditional shape, which many riders find more comfortable.
- Extruded from 7050-T6 aluminum, they feature multi-taper wall thicknesses to increase strength in high stress areas without adding any excessive weight.
- 31.8mm oversize clamp diameter for increased strength in the center of the bar.
- Available in matte black or silver anodized finish with high resolution Inspired graphics.
$49.99
- Classic 19" rear trials tire from Maxxis.
- Designed specifically for trials use with input from World Champion Dani Comas.
- Super Tacky rubber compound provides good grip while also maintaining good durability.
- Traditional block style tread is designed to work in both directions.
- Wire bead.
- Available in 19 x 2.5 size.
Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.
$20.00
$35.00
43% Off
- Bottom bracket cups for Racing Line BB30 cranksets.
- Machined from high quality 7075 aluminum.
- Sealed bearings run smoothly and help keep out dirt and grit.
- 1.37" x 24tpi thread fits all threaded bottom bracket shells.
- Compatible with Hollowtech 2 style bb tools.
- Also compatible with Hashtagg and Try-All BB30 cranksets as well as others.
- Available in anodized red.
- Sold as a pair.
$1.00 - $2.00
- Replacement stem bolts for Echo stems.
- M6 x 20mm size.
- Fitted for 5mm allen key.
- May also fit other stems.
- Available in steel with black or silver finish or titanium.
$65.00
- Designed for street riding use, the Team rim offers an excellent strength to weight ratio.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Double wall construction offers good strength and stiffness.
- 20mm holes drilled in the rim help to reduce weight.
- 36mm wide profile helps to prevent tire roll when compared to similar rims available.
- Matte white powder coat finish with black logos.
- Available in 32h spoke drilling only.
$2.00
- Replacement steel bolt
- M6 x 25mm size
- 5mm allen key head
- Ideal for hub axle bolts
- Sold singly
$1.00
- Replacement steel bolt.
- M5 x 25mm size.
- 4mm allen key head.
- Ideal for brake clamp bolts (without brake booster).
- Sold singly.
$32.00
- A replacement 4-finger lever for Racing Line brake levers.
- Longer lever provides more power over traditional 2-finger levers.
- CNC'd from 6061 T6 aluminum.
- 6mm pivot bolt hole fits Racing Line brake levers only, will not fit Magura levers.
- Available in anodized black only.
- TPA wheel and pin sold separately.
$30.00
- Affordable 20" tire from Jitsie.
- Good mix of durability and performance.
- Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel.
- Classic block tread pattern grips well on all surfaces.
- Tire is designed to work in both directions.
- Sticky rubber compound ensures good grip.
- Wire bead keeps cost down and ensures a secure fit with the rim.
- Available in 20 x 2.25 size.
Please Note: Tires may not have Jitsie logos.
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners.
- Strong tension to keep the chain tight and the tensioner from bouncing.
- Ideal if your spring has broken or become worn out.
- Sold singly.
$55.00
- Super lightweight 26" front rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 33mm width provides good stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 28 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$36.00
- Excellent value for money rim brake bleed kit.
Kit includes:
- 1 500ml Trialtech rim brake fluid
- 1 60ml syringe
- 2 bleed hoses with barb fittings
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes.
- Constructed from tough aluminum for good blend of durability and weight.
- Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube.
- Directional teeth on the outside of the plate provide grip on obstacles.
- Supplied with mounting bolts and spacers.
- Anodized black finish with laser-etched Jitsie logos.
- Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
$80.00
- The Inspired Pro V2 rim offers excellent strength and value.
- Updated V2 version tested and proven by John Langlois.
- Double wall angular profile for increased strength and stiffness.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- 36mm width gives good anti-roll performance even at low tire pressures.
- Available in gloss black anodized finish with white 'Inspired' graphics.
- For use with disc brakes only.
- 32h spoke drilling only.
- Not tubeless compatible.
$775.00
- Inspired's popular Flow model now available as a frame kit.
- Refined geometry gives riders of all experience levels and cycling backgrounds the opportunity to progress their riding ability and broaden their bike handling skills.
- Short chainstays and compact front triangle mean you get a bike that both bunnyhops and spins very well and also offers a stable feel for manuals.
- 73 degree head angle and short offset forks help with more advanced front wheel based moves.
- Frame and fork are made from high quality 6061 aluminum.
- Compact horizontal dropouts designed to work specifically with a 22:16 (fitted as standard) gear ratio.
- Frame and fork feature IS disc mounts for use with disc brakes only (maximum rotor size 185mm).
- A screw-in top cap allows the front brake hose to be routed through the fork steerer tube.
- Available in Gloss Metallic Green only.
Kit Includes:
- Frame: Inspired Flow 24", Gloss Metallic Green
- Fork: Inspired Flow 24", (Disc Only) 24", Alloy, Gloss Metallic Green
- Headset: Trialtech, 44mm Internal, 1-1/8", Black
- Chain Tensioner: Flow Chain Tugs
Specification
- Seatpost: 27.2mm
- Seatclamp: 31.8mm
- BB shell: 73mm
- Tire clearance: 24 x 2.4"
- Headtube: 44mm ID, fits 1-1/8" or tapered forks (requires suitable headset cups)
- Dropouts: 10mm horizontal, 135mm spacing
Geometry:
- Wheelbase: 1010mm
- Chainstay Length: 375mm
- Bottom Bracket Rise: 15mm
- Head Tube Angle: 73°
$3.00 - $5.00
- Single half link from KMC.
- The half link is an outer link that reduces to an inner link, making it half the length of a normal link.
- Very useful for getting chain length or gearing just right.
- Available to fit 1/8" or 3/32" chains.
- Grey finish.
$56.00
- The classic Echo TR headset.
- Made from durable 2014 aluminum.
- Fits 1 1/8" headtubes.
- Countersunk top cap bolt mates perfectly with Echo's topcap.
- Drilled top cap keeps weight to a minimum.
- Anodized finish with laser-etched logos.
- Starnut and color-matched 5mm spacer included.
Please Note: some TR headsets may now come with updated "E" Echo logos instead of the Echo text on the cups and spacers.
$6.00
- Replacement TPA Bushings from Racing Line.
- Bushings sit on both sides of TPA wheel to hold it in place.
- Fits 2005-2010 Magura HS33 and Racing Line levers.
- Sold as a pair (for one brake).
$38.00
- Lightweight half bashring from Jitsie.
- Designed and developed with World Champion Dani Comas.
- CNC machined from 7075 T6 aluminum.
- Asymmetric width for optimal protection while decreasing weight as much as possible.
- Teeth on outer edge provide additional grip.
- Compatible with nearly all modern threaded trials cranks.
- Designed to cover 18t cogs or freewheels.
- Laser etched Jitsie logo.
$12.00
- Replacement axles for Echo pedals.
- Constructed from durable steel.
- Flat spaces on axle end to fit a 15mm pedal wrench.
- Bearings, nuts not included.
- Compatible with Echo TR and SL caged and platform pedals.
- Sold individually.
Please Note: The right pedal axle requires a left-hand threaded nut!
$30.00
- High quality replacement rim brake lever blade from Trialtech.
- Precison CNC machined from 7075 aluminum.
- Minimal design saves weight without compromising strength.
- Ergonomic shape helps to maximize comfort and control.
- 4-finger length offers significantly more power than a standard 2-finger lever blade.
- Compatible with Magura 2005-2010, Tensile and Racing Line lever bodies (pivot bolt spacer included for use with Magura lever bodies).
- Flip-flop design allows both left or right hand usage.
- Reach adjuster uses a larger grub screw (3mm Allen key fitting) with specific flat end to reduce damage to the lever body. Maximum adjustment = 4 turns clockwise from full reach.
- Available in black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos.
- Not supplied with TPA kit.
- Standard (14mm thick, 93mm reach adjustment) or Thin size (11mm thick, 88mm reach adjustment).
- Sold individually.
$65.00
- We offer professional trials wheel builds!
- Our wheel builders have over 50 years of experience and hundreds of wheels built.
- We aim to build and ship wheels within 3-4 days of the order being placed, but we do get backed up occasionally. Please contact us if you need the wheel by a certain date.
- Price includes calculating spoke length and cutting spokes.
$52.00
- Durable double wall rim from Inspired.
- As fitted to the Inspired Flow bikes.
- Double wall, high quality aluminum construction for maximum strength and stiffness.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- 32mm wide profile.
- Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes.
- Black anodized finish with laser etched Inspired logo.
- 32h spoke drilling only.
$55.00 - $110.00
- Replacement slave cylinders from Racing Line.
- CNC machined from high quality 6061 T6 aluminum.
- Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders.
- Compatible with Magura, Echo, and Racing Line brakes.
- Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride.
- Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version.
- Available in anodized black, sold individually or in pairs.
$4.00
- Replacement bearing for Echo TR 116mm and 135mm rear hubs.
- Double seals keep out dirt and water for smooth running.
- Also fits some other manufacturers hubs.
- ID: 10mm OD: 26mm Width: 8mm
- Sold individually.
$75.00
- Lightweight 19" rear rim from Echo.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Large parallelogram holes keep weight to a minimum.
- New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls.
- Supplied with matching Echo rim strip.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Echo logos around valve holes.
$12.00
- High quality fork adaptors for Inspired Arcade forks only.
- Designed to allow 9mm and 10mm axle hubs to be used in Arcade fork 15mm taper dropouts.
- CNC machined from 7075 aluminum.
- Anodized black only.
- Supplied as a pair.
$22.00
- Lightweight aluminum crank bolts as found on Echo complete bikes.
- Manufactured from high quality 7075 T6 aluminum.
- Supplied with steel spacers.
- Fitted for an 8mm allen key.
- M15 thread fits most modern ISIS bottom brackets.
- Anodized finish with laser-etched Echo logos.
Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones.
Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.
$115.00
- Top quality sealed bearing rear disc hub, as found on Inspired Pro spec bikes.
- CNC-machined hub shell features more material in high stress areas to improve durability.
- Machined disc side flange reduces weight without compromising strength.
- Threaded section uses a conventional 1.37" x 24tpi, suitable for use with 16t (and larger) screw-on freewheels.
- ISO disc mount is compatible with all 6-bolt disc rotors.
- Fully sealed cartridge bearings provide silky smooth performance in all conditions.
- Available with either 10mm bolt-in axle or 12mm through axle options, both with 135mm spacing.
- 10mm bolt-in version uses a hollow aluminium axle, with M6 steel axle bolts. Compatible with all Flow and Fourplay/Hex (2019 and earlier) frames.
- 12mm version is compatible with Fourplay (2020 onwards) and Hex (2020 onwards) frames, along with all Skye frames.
- Available in anodized black with laser etched Inspired logos.
- 32h drilling only.
Page 1 of 9
Next page