Trialtech

- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.

- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings. - Standard M6 x 1.0 thread. - For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.

- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake. - Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes. - Available in Large (60ml) or Small (24ml) volume. - Sold individually.

- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.

- Quality bleed hose for hydraulic rim brakes. - M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes. - Can be used as an inlet or outlet hose. - Supplied with Trialtech barbed connector fitted to a 23cm long hose. - Ideal for use with Trialtech bleed syringes. - Sold individually.

- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.

- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.

- CNC-machined aerospace grade aluminum booster spacers from Trialtech. - Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster. - Fits standard M5 brake clamp bolts. - Available in anodized black only. - Supplied as a pair.

- High quality replacement aluminum cylinder washers for Magura rim brakes. - Compatible with all brake clamps that require the traditional Magura cylinder washer. - Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting. - Aluminum construction makes the washers more durable than standard plastic washers. - Anodized gloss black finish. - Sold as a pair (for one brake).

- Replacement bearing to fit Spanish bottom brackets only. - Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others. - High quality construction with double seals. - For use on the drive or non-drive side. - Sold singly. - OD:37mm, ID:22mm, Width:9mm

- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.

- Lightweight alloy snail cams from Trialtech. - CNC machined from 7075 aluminum. - Anodized gloss black finish with machined pocket gives the Sport Lite snail cam a unique and classy appearance. - Aggressive design of the notches means that once you have reached your desired chain tension, the wheel is securely held in that position. - Will fit most bikes with a 10mm axle designed to work with snail cam tensioners. - Sold individually, allowing you to mix and match to your personal preference.

- Trials specific disc brake pads to fit a variety of brakes from Trialtech. - High performance, sintered disc brake pads tested and proven by Trialtech team riders. - Trials specific compound offers excellent performance in both wet and dry conditions. - Available to fit Hope Mono Trial / Tech Trial / Trial Zone / V2 and Echo TR hydraulic disc brakes, Avid BB5 brakes, Avid BB7/Avid Juicy brakes, Avid Elixir/SRAM DB5, Magura MT2/MT4/MT6/MT8, Magura MT5/MT7 or Shimano Saint/Zee brakes. - Supplied as a pair fully packaged with Trialtech stickers enclosed. - Pad retention pin and clip not included.

- Lightweight and extremely minimal single speed spacer kit from Trialtech. - Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm. - Great for single speed conversions or fine tuning your chainline. - CNC machined from high grade aluminum alloy, then anodized to prevent corrosion. - Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers. - Cassette lockring sold separately.

- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.

- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes. - CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves wear life. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank. - Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down. - Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication. - Compatible with all 1/8" and 3/32" chains.

- High quality replacement rim brake lever blade from Trialtech. - Precison CNC machined from 7075 aluminum. - Minimal design saves weight without compromising strength. - Ergonomic shape helps to maximize comfort and control. - 4-finger length offers significantly more power than a standard 2-finger lever blade. - Compatible with Magura 2005-2010, Tensile and Racing Line lever bodies (pivot bolt spacer included for use with Magura lever bodies). - Flip-flop design allows both left or right hand usage. - Reach adjuster uses a larger grub screw (3mm Allen key fitting) with specific flat end to reduce damage to the lever body. Maximum adjustment = 4 turns clockwise from full reach. - Available in black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Not supplied with TPA kit. - Standard (14mm thick, 93mm reach adjustment) or Thin size (11mm thick, 88mm reach adjustment). - Sold individually.

- Light sprung chain tensioner from Trialtech. - Single speed specific chain tensioner. - Constructed from high grade aluminum alloy, spring steel and chromed steel. - Multi coil spring to prevent loss of tension over time, a common problem with other tensioners. - Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures compatibility with most setups. - Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products. - The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms. - The model with hanger mount fits all frames with a standard derailleur hanger. - Gloss black anodized finish.

- Excellent value for money rim brake bleed kit. Kit includes: - 1 500ml Trialtech rim brake fluid - 1 60ml syringe - 2 bleed hoses with barb fittings

- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).

- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).

- High quality replacement disc brake lever blade from Trialtech. - Precison CNC machined from 7075 aluminum. - Minimal design saves weight where possible without compromising strength. - Ergonomic shape helps to maximize comfort and control. - Greater leverage ratio helps increase brake performance. - Compatible with Hope Trial Zone and Race lever bodies. - Flip-flop design allows both left or right hand usage. - M6 reach adjustment grub screw uses a larger allen key fitting than other lever blades and has a wider base, which prevents it from digging into the lever body. - Available in black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Not supplied with pivot hardware. - Supplied fully packaged with Trialtech stickers enclosed. - Sold individually.

- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).

- The Trialtech Race stem offers dependable strength and performance benefits and excellent value for money. - 150mm, 165mm, and 180mm lengths combined with a 35° rise helps to improve bunnhyhops and pedal-ups, but also helps to improve bike control while rolling down obstacles. - Designed for use with over sized 31.8mm handlebars. - Combination of forged and welded 6061 aluminum gives an excellent balance of great strength but also low overall weight. - Steerer clamp features rounded edges to help prevent knee injuries. - M6 bolts on both steerer and handlebar clamps offer excellent strength and reliability. - Finished in tough matt black anodizing with stylish laser etched Trialtech logos on both sides. - High rise makes this stem a great choice for taller riders looking to lengthen the cockpit and gain a bit more reach.

- Popular forged street trials stem as found on many Inspired bikes. - With their advanced one-piece 3D forged construction, these stems offer outstanding performance at an affordable price. - This construction method uses 6061 aluminum allows for great weight saving without dramatically reducing the strength and stiffness. - Wide bolt spacing on the clamp increases the strength of connection between the handlebar and stem. - Available in 80mm length with 40° rise, 90mm length with 35° rise or 110mm length with 35°. - Compatible with 31.8mm handlebars only. - Anodized matte black with white logos only.

- A bashring for threaded cranks on street trials bikes from Trialtech. - CNC machined, high quality 7075-T6 aluminum alloy bashring. - Specifically designed to work on modern street trials bikes. - 22T size, to fit threaded cranks. - 5mm plain cross section gives excellent strength whilst the unique CNC machined pockets remove weight in key areas. - Available in anodized black with Trialtech laser etched logo.

- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.

- Superlight titanium pedal axles from Trialtech. - Lightweight replacement axles for Trialtech Sport Lite caged pedals. - Precision CNC machined from 6AI-4V titanium. - Includes dust seals and axle nuts. - Sold as a pair. - Laser etched Trialtech logos. - Also fit Hashtagg, Jitsie, Try-All, Clean and other caged pedals.

- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.

- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.