Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Trialtech

$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.
$4.00
- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings. - Standard M6 x 1.0 thread. - For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake. - Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes. - Available in Large (60ml) or Small (24ml) volume. - Sold individually.
$5.00 - $6.00
- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.
$6.00
- Quality bleed hose for hydraulic rim brakes. - M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes. - Can be used as an inlet or outlet hose. - Supplied with Trialtech barbed connector fitted to a 23cm long hose. - Ideal for use with Trialtech bleed syringes. - Sold individually.
$6.00
- Replacement top cap and bolt from Trialtech to fit all 1 1/8" headsets. - Includes M6 x 30 bolt. - Available in black only. - Sold individually.
$8.00
- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech. - Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster. - Fits standard M5 brake clamp bolts. - Available in anodized black only. - Supplied as a pair.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes. - Compatible with all brake clamps that require the traditional Magura cylinder washer. - Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting. - Aluminum construction makes the washers more durable than standard plastic washers. - Anodized gloss black finish. - Sold as a pair (for one brake).
$10.00 $15.00 33% Off
- Replacement threaded top cap for Trialtech forks. - Fits Trialtech Sport 20" and 26" forks. - CNC machined from 6061 Aluminum. - Available in anodized black only.
$12.00
- 10mm chain tugs from Trialtech. - Fits most 20" mod bikes and some 26" bikes. - CNC machined aluminum construction, with M6 threaded bar to keep weight down while maintaining maximum functionality. - Guides on the main body prevent the tug from rotating when tightening the axle bolts. - Sold as a pair.
$12.00
- Replacement bearing to fit Spanish bottom brackets only. - Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others. - High quality construction with double seals. - For use on the drive or non-drive side. - Sold singly. - OD:37mm, ID:22mm, Width:9mm
$15.00
- Replacement brake lever piston for Trialtech rim brake levers. - Precision injection molded using low water absorbtion plastic. - Available with Sport or Carthy specification seals. - Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress. - Compatible with both Sport and Carthy lever models. - Sold individually.
$15.00 - $16.00
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$18.00
- High quality, CNC machined cromoly snail cam from Trialtech. - Gloss nickel, hard coated finish for extra durability. - A series of incrementally smaller drilled holes are designed to reduce weight without compromising strength. - Notched design to hold your wheel in position and ensure that it doesn't move, designed to be a 'fit-and-forget' product. - High resolution tooth pattern provides fine chain adjustment. - Will fit most bikes with a 10mm axle designed to work with snail cam tensioners. - Sold individually to allow you to tailor your setup to your specific needs.
$20.00 - $30.00 $26.00 - $30.00 Up to 29% Off
- Trials specific disc brake pads to fit a variety of brakes from Trialtech. - High performance, sintered disc brake pads tested and proven by Trialtech team riders. - Trials specific compound offers excellent performance in both wet and dry conditions. - Available to fit Hope Mono Trial / Tech Trial / Trial Zone / V2 and Echo TR hydraulic disc brakes, Avid BB5 brakes, Avid BB7/Avid Juicy brakes, Avid Elixir/SRAM DB5, Magura MT2/MT4/MT6/MT8, Magura MT5/MT7 or Shimano Saint/Zee brakes. - Supplied as a pair fully packaged with Trialtech stickers enclosed. - Pad retention pin and clip not included.
$20.00
- Lightweight and extremely minimal single speed spacer kit from Trialtech. - Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm. - Great for single speed conversions or fine tuning your chainline. - CNC machined from high grade aluminum alloy, then anodized to prevent corrosion. - Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers. - Cassette lockring sold separately.
$24.00
- High quality, 6061 aluminum, CNC machined hose splitter for hydraulic rim brakes. - Helps to prevent damage to vulnerable cross-overs found on standard brakes. - Increases brake efficiency and feel by ensuring even fluid flow to each cylinder. - Uses 3 standard M6 Magura or Trialtech barbed fittings (sold separately) for easy hose connection and replacement. - Available in black anodized finish with stylish Trialtech 'Bashring' laser etched logos. - NOT compatible with most disc brakes and fittings, please contact us if you are unsure on compatibility.
$28.00 - $30.00
- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.
$28.00 - $35.00
- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes. - CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves wear life. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank. - Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down. - Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication. - Compatible with all 1/8" and 3/32" chains.
$30.00
- High quality replacement rim brake lever blade from Trialtech. - Precison CNC machined from 7075 aluminum. - Minimal design saves weight without compromising strength. - Ergonomic shape helps to maximize comfort and control. - 4-finger length offers significantly more power than a standard 2-finger lever blade. - Compatible with Magura 2005-2010, Tensile and Racing Line lever bodies (pivot bolt spacer included for use with Magura lever bodies). - Flip-flop design allows both left or right hand usage. - Reach adjuster uses a larger grub screw (3mm Allen key fitting) with specific flat end to reduce damage to the lever body. Maximum adjustment = 4 turns clockwise from full reach. - Available in black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Not supplied with TPA kit. - Standard (14mm thick, 93mm reach adjustment) or Thin size (11mm thick, 88mm reach adjustment). - Sold individually.
$35.00 - $50.00
- Light sprung chain tensioner from Trialtech. - Single speed specific chain tensioner. - Constructed from high grade aluminum alloy, spring steel and chromed steel. - Multi coil spring to prevent loss of tension over time, a common problem with other tensioners. - Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures compatibility with most setups. - Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products. - The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms. - The model with hanger mount fits all frames with a standard derailleur hanger. - Gloss black anodized finish.
$36.00
- Excellent value for money rim brake bleed kit. Kit includes: - 1 500ml Trialtech rim brake fluid - 1 60ml syringe - 2 bleed hoses with barb fittings
$36.00
- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).
$38.00
- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).
$38.00
- High quality replacement disc brake lever blade from Trialtech. - Precison CNC machined from 7075 aluminum. - Minimal design saves weight where possible without compromising strength. - Ergonomic shape helps to maximize comfort and control. - Greater leverage ratio helps increase brake performance. - Compatible with Hope Trial Zone and Race lever bodies. - Flip-flop design allows both left or right hand usage. - M6 reach adjustment grub screw uses a larger allen key fitting than other lever blades and has a wider base, which prevents it from digging into the lever body. - Available in black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Not supplied with pivot hardware. - Supplied fully packaged with Trialtech stickers enclosed. - Sold individually.
$42.00
- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).
$45.00
- The Trialtech Race stem offers dependable strength and performance benefits and excellent value for money. - 150mm, 165mm, and 180mm lengths combined with a 35° rise helps to improve bunnhyhops and pedal-ups, but also helps to improve bike control while rolling down obstacles. - Designed for use with over sized 31.8mm handlebars. - Combination of forged and welded 6061 aluminum gives an excellent balance of great strength but also low overall weight. - Steerer clamp features rounded edges to help prevent knee injuries. - M6 bolts on both steerer and handlebar clamps offer excellent strength and reliability. - Finished in tough matt black anodizing with stylish laser etched Trialtech logos on both sides. - High rise makes this stem a great choice for taller riders looking to lengthen the cockpit and gain a bit more reach.
$50.00
- Popular forged street trials stem as found on many Inspired bikes. - With their advanced one-piece 3D forged construction, these stems offer outstanding performance at an affordable price. - This construction method uses 6061 aluminum allows for great weight saving without dramatically reducing the strength and stiffness. - Wide bolt spacing on the clamp increases the strength of connection between the handlebar and stem. - Available in 80mm length with 40° rise, 90mm length with 35° rise or 110mm length with 35°. - Compatible with 31.8mm handlebars only. - Anodized matte black with white logos only.
Page 1 of 2 Next page