Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Waxing Tools & Accessories

Check out all our ski wax tools and accessories for sale at Webcyclery & Webskis

Shop all our ski wax tools and accessories for sale and keep your skis perfectly waxed all winter long.

$5.00
- Groove and all purpose scraper from Swix. - Used for klister application or to remove wax or klister from the base before cleaning. - Hole so it can be hung for convenient storage.
$6.00
- What the Italians use to get the sticky klister wax residue off of their hands. - This stuff is amazing, a little goes a long way and it really works. - Comes in a 75ml tube.
$6.00
- Our custom Webskis/Webcyclery shop scraper. - 3.5mm thick. - Hole so it can be hung for convenient storage.
$7.00
- Natural cork from Rex. - Used to cork wax into the base.
$7.00
- Natural cork from Swix. - Used to cork wax into the base. - Molded groove on one side for easier grip.
$7.50
- Handy groove pen from Toko. - Go-to groove tool in the Webskis shop. - Great for removing wax from center grooves in bases. - Also useful for scraping edges.
$7.50
- Classic plexi scraper from Toko. - 5mm thickness.
$8.00
- Great for wax removal from bases. - Handy cutout hole for hanging when not in use. - Available in 4mm or 5mm thicknesses.
$8.00
- Swix T12 Synthetic Cork. - Higher density is great for powders and fluoros.
$9.00
- Swix Synthetic Cork with #100 grit sandpaper attached with Velcro®. - Combi cork with sandpaper to be used on the kick zone before applying kick wax. - The sand paper will make the kick wax adhere better to the base.
$10.00
- Classic plexi scraper from Solda. - 4mm thick plexi-glass is durable and excellent for removing wax from bases.
$10.00 - $64.00
- When you really want to clean your skis and polish them up, the Swix Fiberlene cloth is what you need. - To be used between iron and base. - Protects the base from overheating colder waxes. - Absorbs dirt and excess wax, and leaves a thin and uniform wax layer. - Available in 20m roll in 140mm width, and 40m and 200m rolls in 285mm width.
$15.00
- Flexible steel scraper from Solda. - Ideal for base peeling or removal of base repair material. - It is important to keep it sharp and to use with care. Improper use of a steel scraper can damage ski bases. - Handy hanging hole.
$16.00 - $25.00
- Lightly scented liquid base cleaner from Swix. - Remove as much wax or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. - Available in 5oz aerosol and 16.9oz liquid containers.
$16.00
- An innovative wax remover gel for cleaning the kick zones of classic skis. - Removes even persistent GripWax and klister residue. - Ideal for removing GripSpray. - Available in 250ml aerosol can.
$16.00 - $25.00
- A gentle cleaning liquid for all types of base. - Removes wax residue as well as dirt and prepares the base for waxing. - Available in 250ml spray or 500ml liquid container.
$18.00
- Vauhti's Small Nylon Brush allows you to have the most compact wax kit out there when paired with their liquid glide waxes. - This stiff white nylon brush is the do-it-all wonder that gets you out on the snow as fast as possible. - Don't overthink it, just brush and go.
$20.00
- Great all around brush from Swix. - Will not damage structures. - Available in small rectangular size.
$20.00 - $60.00
- This brush is the first brush used after scraping. - Medium coarse bronze bristles. - Use for 10 strokes. - Available in a small, pocket sized version, medium rectangular, and large oval with strap.
$20.00
- The Swix F4 Combi brush is the ideal brush when applying any F4 product. - White felt for spreading the F4 product evenly on the base and for polishing. - Nylon for brushing and removing excess wax from the structure. - This combination can increase the durability of any F4 product. - Comfortable contoured wooden grip.
$22.00
- Protect your clothes when waxing while wearing this Solda apron. - Black, high quality apron has two front pockets to hold your tools. - Made of a poly/cotton blend, it is easily washable. - Also great for use in the kitchen.
$24.00
- One of our favorite brushes in the Solda line. - Use this for cold application and polishing fluorocarbon top coat waxes. - Work back and forth with medium hard strokes to create friction and force fluorocarbon powders or block applied waxes into the bases. - Natural cork working surface. - Curved sides for a comfortable grip.
$24.00
- Vauhti Skin Cleaner was developed specifically to clean skins in a gentle way, without affecting the skin glue. - Helps restore the properties of the skin and increases its efficiency. - Formulated for cleaning skin strips from any built-up contaminants such as dirt or grip waxes from the ski track. - To be used after skiing: simply shake the bottle, spread cleaner on the skin strip, and wipe clean with a cloth. - 80ml applicator bottle.
$25.00
- Soft felt brush from Solda. - Curved sides for a comfortable grip. - Use this brush for polishing fluorocarbons after corking for the fastest skis possible!
$25.00
- Special remover for fluorinated ski waxes. - A gentler cleaner than citrus solvent. - Designed to remove dirt while leaving fluoro wax intact. - 75ml bottle with applicator sponge.
$25.00 - $34.00
- Classic nylon hand brush from Solda. - For many skiers this could be your only brush. - Use this brush to remove waxes from most base grinds after scraping. - Will not damage structures. - Medium brush bristles made from durable synthetic nylon fibers.
$25.00
- Handy wall rack for skis that can be easily transported. - Holds up to 8 pair of nordic skis or 4 pairs of alpine skis. - Simply attach to a wall, stand your skis up, and strap them in.
$25.00 - $60.00
- Polish brush for all waxes from Swix. - Brush for 5 to 10 strokes. - Available in small rectangular brush or large oval brush with strap.
$25.00
The Swix Red Fine Nylon brush was specially developed to polish liquid waxes. The fine bristles go deep in the structure and make a smooth and glossy surface. It can also be used as a final step polishing brush for all types of wax.
$25.00
- This little holder from Swix is what you clip your binding to in a profile. - 75mm of vertical adjustment. - Fits Swix T793-2 and T0768-2 profiles.
$26.00
- A slightly stiffer brush than the standard nylon. - A combination of stiff nylon and soft horsehair bristles. - Use this after scraping for removing warm waxes from coarse base structures. - If you are looking to own just one brush and live in a climate where you have lots of medium to warm snow, this could be the choice.
$26.00 - $60.00
- Horsehair bristle brush from Swix. - A great second brush or all around brush on fluorinated waxes. - Brush for 5 to 10 strokes. - Available in rectangular or oval (with strap).
$30.00 - $38.00
- Designed for the final brushing for cold waxes and all fluorinated waxes. - Soft horsehair bristles gently expose the base structure. - Oval brush features a strap to help control the tool and produce a glossy finish and fast skis. - Can also be used for brushing out cold waxes on fine structures if you don’t have a fine brass brush. - We always use this to finish our race day wax fluorocarbon top coat. - Fine, natural fibers with neutral electrostatic charge. - Available in a standard hand brush and large oval brush w/strap.
$30.00
- Simple snow thermometer from Swix. - Includes protective case. - Temperature gauge from -30°C to 50°C.
$30.00 - $65.00
- Ideal for use before each waxing. - Can also be used as first brush after waxing. - Coarse bronze bristles. - Row of softer nylon bristles around the outside edge as “sweepers” for wax particles. - Brush for 10 strokes. - Available in rectangular or oval (with strap).
$30.00 - $65.00
- Stiff nylon bristle brush from Swix. - Brush for 10 strokes. - When applying fluorinated waxes using two-step ironing, these brushes are used to “brush up” the powder between the two ironing steps.
$30.00 $50.00 40% Off
- Structure rollers from Swix for older T403 structure tools. - They do not have bearings on them like the T423. - Sold individually.
$30.00 - $60.00
- Ideal as a second brush on fluorinated waxes. - Brush 5 to 10 strokes. - Available in rectangular or oval (with strap).
$32.00 - $45.00
- Fine, soft brass bristle brush from Solda. - Use for freshening bases before waxing. - Also a good first brush for cold waxes on a ski with a fine grind. - Make 2-3 passes with the brass brush after scraping all cold/hard waxes, then continue with nylon or nylon/horsehair and finish with horsehair brush. - Oval brush has an outer ring of nylon bristles. - Available in rectangular or oval (with strap).
$34.00
- Soft nylon hand brush from Solda. - Soft brush bristles made from durable synthetic nylon fibers. - Will not damage base structures.
$35.00 - $50.00
- Fine, natural fiber hard horsehair roto brush from Solda. - This brush works best with colder, harder waxes or performance waxes that have a hardener added to them. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.
$35.00
- Hard nylon hand brush from Solda. - Hard brush bristles made from durable synthetic nylon fibers. - Ideal for harder, colder waxes than standard nylon brushes.
$36.00 - $38.00
- The Solda soft nylon roto brush works best with low hardness waxes. - Available in 100mm and 120mm sizes.
$37.00 - $40.00
- High quality cork roller from Solda. - No seams for smooth operation and polishing. - Great for fluorocarbon application. - We use this after ironing powders, after rubbing on fluoro blocks or after spray-on fluoros have dried. - Available in 100mm and 120mm lengths.
$37.00 - $38.00
- Synthetic nylon bristle roto brush from Solda. - Available in 100mm and 120mm sizes.
$37.00 - $39.00
- Natural/synthetic hybrid bristle roto brush from Solda. - Use this brush to remove medium to warm waxes after scraping. - It will also polish base surface like a shoeshine brush. - Abrasive yet safe on base structures. - Available in 100mm and 120mm lengths.
$40.00
- Keep your scrapers fresh with this sharpener from Toko. - Compatible with 3, 4, 5 and 6 mm scraper widths. - Ceramic disc sharpens scraper edges and helps extend the life of scrapers.
$42.00 - $44.00
- Fine, natural fiber roto brush from Solda. - Use this brush as the final polish brush for any waxes. - We use this brush to finish our race day fluorocarbon top coats. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.
$42.00 - $44.00
- Solda's stiff nylon roto brush works best with colder, harder waxes. - Stiff, synthetic nylon bristles. - Available in 100mm and 120mm sizes.
$50.00 - $52.00
- This brush is for the final touches on most wax jobs. - Soft felt will remove the last of the excess wax and leave a beautiful, polished finish behind. - Available in 100mm and 120mm lengths.
$50.00
- Structure rollers from Swix for the T423 structure tool. - Bearings included. - Sold individually.
$55.00 - $60.00
- Solda roto brush handles let you speed up the waxing process. - Allow for faster waxing of skis than hand brushes. - Made for use with a variable speed hand drill. - Bearing-based spindle gives smooth operation and improved durability. - Designed for use with 120mm brushes. - These can also be used with 100mm brushes by cutting a small, 20mm spacer from a piece of PVC pipe and putting it on the the spindle next to the handle.
$56.00 - $58.00
- Fine, soft brass bristle roto brush from Solda. - Use for freshening bases with fine grind before waxing. - Also for the first brushing of cold waxes after scraping cold bases that have a fine structure. - Available in 100mm and 120mm lengths.
$60.00 - $90.00
- High quality steel brush with an excellent reputation in racing. - Great for cleaning bases of old wax. - Also good for first brushing after scraping. - Brush for 5-6 strokes. - Significantly nicer than the steel brush you use to clean your bbq grill.
$60.00
- The T77 Iron is a good value iron that works well for both alpine and nordic skis. - Ergonomic body for easy use. - Wide metal plate that suits both alpine, snowboard and nordic. - Angled at one side to make it easier to keep a constant speed when melting the wax. - Thick metal plate ensures a stable heating. - Plate dimensions: 100 x 160mm. - 110 Volt, 800 Watt.
$70.00
- Swix fine steel brush is ideal for cleaning out the structure before waxing. - Ultra fine 0.10 mm bristles go deep into the base structure to clean and refresh the base. - Can also be used as second brush after waxing. - Use 4 to 5 strokes. - This brush should only be used in one direction, Tip to Tail of ski. - Do not brush back and forth on ski base.
$110.00
- The Swix Travel Profile Kit can be easily put in your travel wax box for those races away from home. - Three piece aluminum profile is light and easy to transport. - Sets up very quickly and hassle free. - Securely affixes to almost any wax bench. - Binding pin attachment is wider (60mm) than the original T00785 to accommodate wider backcountry bindings.
$125.00
- Performance digital wax iron developed both for nordic, alpine and snowboard use. - Ergonomic handle and a convenient temperature adjustment wheel. - Digital temperature display for easy, accurate readings. - Thick metal plate ensures stable, even heating. - Features thick film type heating element that allows the wax iron to heat up fast and evenly, and maintain a more constant temperature. - Temperature adjustment from 80°C to 180°C. - Output: 1000 W.
$160.00
- This lightweight, steel frame design table from Swix. - Portable and easy to travel with . - One leg is height adjustable for uneven floors. - Red steel frame with black laminate top. - Top dimensions: 120 x 35 x 84-89cm (47 x 14 x 33-35in)
$200.00
- Quality wax profile from Swix. - Suitable for both classic and skate skis. - Made from aluminum and plastic so it is light and easy to adjust. - Same profile in front and back for use both ways. - Fits skis from 150cm to 210cm. - Compatible with Swix T0079-1 legs or T0790-K clamps.
Page 1 of 2 Next page