Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Waxing Tools & Accessories

START Zero Cleaner
$28.00
- Start Zero Base Cleaner Spray for removing Start grip tape. - Spray on, let soak in for a few minutes, then scrape off tape with a scraper. - Gives a much drier ski surface compared to normal wax remover, where the surface feels a little oily. - Also good for skin cleaning. - 85ml.
Solda Hand Cleaner
$6.00
- What the Italians use to get the sticky klister wax residue off of their hands. - This stuff is amazing, a little goes a long way and it really works. - Comes in a 75ml tube.
Solda Scraper
$7.00
- Classic plexi scraper from Solda. - 4mm plexi-glass scraper removes wax from bases after melting the wax on with a ski waxing iron.
Solda Metal Scraper
$10.00
- Flexible steel scraper from Solda. - Ideal for base peeling or removal of base repair material. - It is important to keep it sharp and to use with care. Improper use of a steel scraper can damage ski bases. - Handy hanging hole.
Solda Cork Brush
$20.00
- One of our favorite brushes in the Solda line. - Use this for cold application and polishing fluorocarbon top coat waxes. - Work back and forth with medium hard strokes to create friction and force fluorocarbon powders or block applied waxes into the bases. - Natural cork working surface.
Solda Felt Brush
$20.00
- Soft felt brush from Solda. - Use this brush for polishing fluorocarbons after corking for the fastest skis possible!
Solda Nylon Brush
$20.00 - $25.00
- Classic nylon hand brush from Solda. - For many skiers this could be your only brush. - Use this brush to remove waxes from most base grinds after scraping. - Will not damage structures. - Medium brush bristles made from durable synthetic nylon fibers.
Solda Nylon Horsehair Brush
$20.00
A little stiffer than the nylon brush. It is a combination of stiff nylon and soft horsehair bristles. Use this after scraping for removing warm waxes from coarse base structures. • Synthetic / natural hybrid • Stiff nylon combined with softer horse hair • Horse hair is non-conductive for static charge. If you are looking to own just one brush and live in a climate zone where you have lots of medium to warm snow, this could be the choice.
Solda Scotchbrite Brush
$20.00
- Use this for cleaning ski bases after metal scraping or base repair. - Cleaning bases starts with a metal brush. Follow this with back and forth cleaning with the Scotch Brite. Always finish with two tip to tail brushings.
Solda Tampico Nylon Brush
$20.00 - $25.00
- Use this brush to remove medium to warm waxes after scraping. - It will also polish base surface like a shoeshine brush. - Natural/synthetic hybrid bristles. - Abrasive yet safe on base structures.
Solda Waxing Apron
$20.00
- Protect your clothes when waxing while wearing this apron. - Black, high quality apron has two front pockets to hold your tools. - Made of a poly/cotton blend, it is easily washable. - Also great for use in the kitchen.
Solda Brass Wire Brush
$22.00 - $25.00
- Fine, soft brass bristle brush from Solda. - Use for freshening bases before waxing. - Also a good first brush for cold waxes on a ski with a fine grind. - We usually make 2-3 passes with the brass brush after scraping all cold/hard waxes. Then we continue with nylon or nylon/horsehair and we finish with the horsehair brush. - Oval brush has an outer ring of nylon bristles. - Available in rectangular or oval (with strap).
Solda Horsehair Brush
$22.00 - $25.00
- Designed for the final brushing for cold waxes and all fluorinated waxes. - Soft horsehair bristles gently expose the base structure. - Strap on the handle (of the large oval brush) helps control the tool and produce a glossy finish and fast skis. - Can also be used for brushing out cold waxes on fine structures if you don’t have a fine brass brush. - We always use this to finish our race day wax fluorocarbon top coat. - Fine, natural fibers with neutral electro/static charge. - Available in a standard hand brush and large oval brush w/strap.
Solda Fluor Cleaner
$25.00
- Special remover for fluorinated ski waxes. - A gentler cleaner than citrus solvent. - Designed to remove dirt while leaving fluoro wax intact. - 75ml bottle with applicator sponge.
Solda Hard Nylon Brush
$25.00
- Hard nylon hand brush from Solda. - Hard brush bristles made from durable synthetic nylon fibers. - Ideal for harder, colder waxes than standard nylon brushes.
Solda Soft Nylon Brush
$25.00
- Soft nylon hand brush from Solda. - Soft brush bristles made from durable synthetic nylon fibers. - Will not damage base structures.
Solda Soft Nylon Roto Brush
$28.00 - $30.00
The soft nylon roto brush works best with low hardness waxes. - Available in 100mm and 120mm sizes.
Solda Stiff Nylon Roto Brush
$28.00 - $30.00
- Solda's stiff nylon roto brush works best with colder, harder waxes. - Stiff, synthetic nylon bristles. - Available in 100mm and 120mm sizes.
Solda Hard Horsehair Roto Brush
$35.00 - $37.00
- Fine, natural fiber hard horsehair roto brush from Solda. - This brush works best with colder, harder waxes or performance waxes that have a hardener added to them. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.
Solda Brass Wire Roto Brush
$37.00 - $38.00
- Fine, soft brass bristle roto brush from Solda. - Use for freshening bases with fine grind before waxing. - Also for the first brushing of cold waxes after scraping cold bases that have a fine structure. - Available in 100mm and 120mm lengths.
Solda Cork Roto Brush
$37.00
- High quality cork roller from Solda. - No seams for smooth operation and polishing. - Great for fluorocarbon application. - We use this after ironing powders, after rubbing on fluoro blocks or after spray-on fluoros have dried. - Available in 100mm and 120mm lengths.
Solda Felt Roto Brush
$37.00
- This brush is for the final touches on most wax jobs. - Soft felt will remove the last of the excess wax and leave a beautiful, polished finish behind. - Available in 100mm and 120mm lengths.
Solda Horsehair Roto Brush
$37.00
- Fine, natural fiber roto brush from Solda. - Use this brush as the final polish brush for any waxes. - We use this brush to finish our race day fluorocarbon top coats. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.
Solda Nylon Roto Brush
$37.00
The easy way to brush your wax out. The Solda Nylon brush comes in 2 sizes - 100mm and 120mm. The Solda handle fits either (you just need to use a spacer if you want to use the 100mm).
Solda Tampico Roto Brush
$37.00
- Natural/synthetic hybrid bristle roto brush from Solda. - Use this brush to remove medium to warm waxes after scraping. - It will also polish base surface like a shoeshine brush. - Abrasive yet safe on base structures. - Available in 100mm and 120mm lengths.
Solda Roto Brush Handle
$40.00 - $42.00
- Solda roto brush handles let you speed up the waxing process. - Allow for faster waxing of skis than hand brushes. - Made for use with a variable speed hand drill. - Bearing-based spindle gives smooth operation and improved durability. - Single brush handle designed for use with 120mm brushes. - Double brush handle designed for use with 120mm brushes and 100mm brushes (2 20mm spacers included for use with 100mm brushes). The single brush handle can be used with 100mm brushes by cutting a small, 20mm spacer from a piece of PVC pipe and putting it on the the spindle next to the handle.
Solda Steel Brush
$65.00
- Steel bristle hand brush from Solda. - Nylon outer bristles made from durable synthetic nylon fibers. - Steel inner bristles. - Great for pre-wax cleaning.
Swix Groove Scraper
$5.00
- Groove and all purpose scraper from Swix. - Used for klister application or to remove wax or klister from the base before cleaning. - Hole so it can be hung for convenient storage.
Swix Natural Cork
$6.00
- Natural cork from Swix. - Used to cork wax into the base. - Molded groove on one side for easier grip.
Swix Plexi Scraper
$7.00 - $8.00
- Great for wax removal from bases. - Handy cutout hole for hanging when not in use. - Available in 3mm or 4mm thicknesses.
Page 1 of 3 Next page