Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

Surly Ultra New Roadie Rear Hub (130mm)
$75.00
Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.
SRAM Predictive Steering Hub
$250.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
Shimano Alfine Centerlock Dynamo Hub
$143.99 - $144.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
SRAM 900 Rear Hub
$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
Robert Axle Project Thru Axle For BOB Trailer
$62.00 - $72.00
Yes! A 12 mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle equipped bike. Take full advantage of your modern bike with 12 mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo and more! Since 2013, we have been an important part of cyclists’ adventures all over the world. Our BOB Trailer thru axles have millions of miles on them in mountain bikes and road bikes, carbon bikes, fat bikes and e-bikes. Our axles are specifically designed to handle the high-torque loads generated by e-bikes. Our BOB Trailer axles are not just designed in the USA, but are made here as well. They are machined by avid cyclists, to the tightest standards in the industry. We safety test, to failure, every batch of axles we produce to ensure they exceed your expectations. - The axle shaft and axle end are precision CNC machined. - The axle shaft is 7075 aluminum and hard black anodized for rugged durability. - The axle ends are stainless steel, which allow for mounting of the BOB Trailer bobbins. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins. Those are available separately, here. Or you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built and quality tested in the USA. Proven around the world.
Robert Axle Project Lightning Bolt-On Front Thru Axle
$42.00 - $58.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - Lightning is Better. Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile and lighter weight option to replace your stock thru-axles. - Low Profile. No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight. Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install. Our matching front and rear Lightning Bolt-On Axles only require a standard 6 mm hex wrench for easy installation and removal. - Better Tolerances. Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. - No longer will your axle loosen while riding. - The axle is precision CNC machined in the USA from 7075 aluminum and hard anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for installation or wheel removal using your standard 6mm hex wrench. - Designed, built and quality tested in the USA. Proven around the world.
Robert Axle Project Lightning Bolt-On Rear Thru Axle
$48.00 - $58.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - Lightning is Better. Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile and lighter weight option to replace your stock thru-axles. - Low Profile. No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight. Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install. Our matching front and rear Lightning Bolt-On Axles only require a standard 6 mm hex wrench for easy installation and removal. - Better Tolerances. Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. - No longer will your axle loosen while riding. - The axle is precision CNC machined in the USA from 7075 aluminum and hard anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for installation or wheel removal using your standard 6mm hex wrench. - Designed, built and quality tested in the USA. Proven around the world.
Robert Axle Project Thru Axle For Trainer
$54.00 - $80.00
Our Trainer Axle is designed to adapt your thru axle equipped bike with your on-wheel trainer, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo and many other trainers. Our goal is to fit the thru axle to your bike perfectly, so we minimize spacers and extra parts, providing a clean, high performance axle for your bike. Train, warm up and be race ready and fit for the season. - This axle is compatible with 1up, Blackburn, Cyclops, Kinetic, - Tacx, Wahoo and many other on-wheel resistance trainers. - The true length of the axle shaft is can be shortened to using the included 6 mm spacer. - Please note: Thru-axle lengths do not equal hub standards. An axle has to be longer than the hub to fit in the frame. A 12×142 hub does not equal a 142 mm long axle. - The axle shaft and axle ends are precision CNC machined from 7075 aluminum, and hard anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5 mm hex wrench. - Designed, built and quality tested in the USA. Proven around the world.
Robert Axle Project Thru Axle For Kid Trailer
$3.00 - $82.00
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet and cargo trailers such as: Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Purchase our Kid Trailer axle for your bike. Share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Since 2013, we have been an important part of cyclists’ adventures all over the world. Our axles have millions of miles on them in mountain bikes and road bikes, carbon bikes, fat bikes and e-bikes. Our axles are specifically designed to handle the high-torque loads generated by e-bikes. Your stock thru-axle is not strong enough to haul your precious cargo! Our axles are 3 to 4 times stronger than the stock axle that came with your bike. Our stainless steel axle ends provide a safe and secure attachment point of the hitch to the axle. The axle is quick to install and remove with a common 5mm hex key. Our axles are not just designed in the USA, but are made here as well. They are machined by avid cyclists to the tightest standards in the industry. We safety test, to failure, every batch of axles we produce to ensure they exceed your expectations.
Robert Axle Project RAP Bobbins - Pair
$20.00
These bobbins are made by the Robert Axle Project to complete our axles for compatibility with the BOB Trailer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. Keep in mind it is always a good idea, on any significant tour, to carry a spare Bobbin and Trailer Pin, just in case. Sold in pairs. Manufactured from 303 Stainless Steel. Includes stainless steel hardware for attaching to axle.
DT Swiss 350 MTB 6-Bolt Front Hub
$80.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
DT Swiss 350 MTB Center Lock Front Hub
$77.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Robert Axle Project Drive Thru Dummy Hub
$35.00 - $70.00
Originally designed and made by Chris McGovern of McGovern Cycles, the Drive Thru is a dummy hub, or chain keeper that replaces your wheel while cleaning the chain. It is fast and an effective way to clean your chain in between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great or packing the bike for transport! - For cleaning your chain anywhere, any time. - Short dummy axle allows for quick, one-handed installation and easy chain placement, as you only need to thread into the drive side dropout. - Chain can be easily added on or removed from pulley. - Knurled axle stud head is easy to finger tighten with cold/greasy/oily hands. - Pulley is captured on the dummy axle with the O-ring, or can be quickly removed to fit flat in a toolbox. - Weight: 0.3 lbs
Crank Brothers XD Driver Body
$99.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
Shimano Alfine Dynamo 3.0W Center Lock Disc E-THRU Front Hub
$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance
Surly Ultra New Front Hub
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
DT Swiss Limited Edition 240 Oil Slick Hubset
$712.80
- Limited Edition DT Swiss 240 hubset with their special Oil Slick finish. - Equipped with the latest Ratchet EXP freehub system to maximize reliability. - Increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement, which reduces wear, and a smaller number of parts not only makes maintenance easier but also reduces weight. - IS 6-bolt disc mount. - Ratchet EXP 36 T - Shimano MICRO SPLINE freehub body. - Front: 15 x 110mm axle, Rear: 12 x 148mm axle - 32h spoke drilling only. - Sold as a pair of hubs (front and rear). Please Note: The exact finish on each hubset is unique and will vary from the photo.
Surly Ultra New Rear Hub (120mm)
$70.00 - $75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
Hope Pro 2 & Pro 2 Evo 15mm Thru Axle Conversion Caps
$49.00
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
Shimano Metrea Dynamo 3.0W Center Lock Disc Front Hub
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
Surly Ultra New Disc Rear Hub
$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Shimano Deore HB-T610 Rim Brake Front Hub
$21.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling
DT Swiss 350 MTB Center Lock Rear Hub
$223.90
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$23.00
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Stan's NoTubes 3.30/3.30Ti 9mm Thru Axle Hub Kit
$20.00
The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Shimano ZEE Rear Freehub
$60.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.
Page 1 of 2 Next page