Wheels

- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- High quality sealed rear disc hub from Trialtech. - 135mm spacing, to fit the majority of modern trials and street frames. - International standard 6-Bolt disc fitting. - Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in. - Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard). - Serrated end caps and bolt washers help keep the bolts tight and the hub in place. - CNC machined aluminium shell. - 32h drilling. - Available in gloss black with laser etched Trialtech 'bashring' logo.

- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight. - Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley. - Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!). - Custom butted center section adds strength around the spoke holes for improved durability. - 31mm wide profile gives a good balance of low weight and tire performance. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in sandblast black anodized finish with Carthy Signature laser etched logos. - Available in 28h or 32h spoke drilling. - For use with rim or disc brakes.

- Trialtech's Sport Lite rear non-disc hub is lightweight but tough and has been designed to perform at the highest level. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - Custom design, CNC machined 7075 aluminum shell and hollow axle. - Serrated axle ends and bolt washers help keep the bolts tight and the hub in place. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Oversized 10mm axle bolt on the drive side keeps the hub secure in the dropout. - Matte black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Supplied with high tensile, zinc plated cr-moly bolts and custom, low profile aluminum washers. - 3mm removable washer inserts allow the hub to be used with or without snail cams. - 32h spoke drilling.

- Lightweight 20" front tire developed by OBR (Owned By Riders) to compliment their Gekok 19" rear tire. - Unique diamond-shaped tread pattern grips well on all surfaces without adding unnecessary rolling resistance. - Widely spaced knobs shed mud well. - Super sticky lightweight rubber compound for maximum grip. - Low block tread design helps save weight. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - OBR logos on sidewalls. - Available in 20 x 2.0" size.

- Lightweight 19" rear tire developed by OBR (Owned By Riders). - Tested and used by many top UCI riders including Abel Mustieles. - Unique tread pattern is a mix of several other common designs to provide excellent grip in all conditions. - Widely spaced knobs shed mud well while still being aggressive enough for good traction loose terrain. - Super sticky lightweight rubber compound for maximum grip. - Siping on center tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Large volume casing provides excellent bounce. - Wire bead for a secure fit. - OBR logos on sidewalls. - Available in 19 x 2.6" size.

- Lightweight, competition proven front tire from world famous bike trials brand Monty. - Developed and tested by multiple time World Champions Abel Mustieles and Dani Comas. - Low block tread design helps save weight. - Widely spaced tread pattern increases grip and sheds mud better in natural terrain. - Cut-outs from the central tread blocks reduce weight further as well as improve grip by allowing the blocks to conform to uneven surfaces. - Thin sidewalls keep weight to a minimum. - Slow rebound rubber compound improves grip and gives the tire a predictable feel. - Folding bead reduces unnecessary weight. - Available in 20 x 2.0" size.

- The Maxxis Holy Roller is a street-oriented tire used by many street trials riders. - Low-profile inverted semi-knob tread design is fast rolling with low resistance. - Lightweight single ply casing keeps weight down. - Constructed from the 60a MaxxPro rubber compound for a good compromise of grip and durability. - As spec'd on many Inspired and Czar bikes. - Available in 24" x 2.4" only. - Wire bead.

- Classic 19" rear trials tire from Maxxis. - Designed specifically for trials use with input from World Champion Dani Comas. - Super Tacky rubber compound provides good grip while also maintaining good durability. - Traditional block style tread is designed to work in both directions. - Wire bead. - Available in 19 x 2.5 size. Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.

- Designed for street riding, the K-Rad works great as a street trials tire. - As spec'd on many Inspired and other street trials bikes. - Features an inverted tread design and knurled tread surface that's low profile and fast rolling without sacrificing traction or grip. - Ribbing between knobs strengthens the casing. - 24" x 2.3" size is suitable for front or rear use.

- Spare hub axle spacers from Belgian brand Jitsie. - CNC machined from high quality aluminum. - Designed to work with Jitsie hubs, may also work with other brands. - Narrower side of spacer rests against hub bearing. - Available in 2mm, 3mm, and 5mm widths. - All sizes have a 10mm inner diameter and 16mm outer diameter. - Anodized black only. - Sold individually.

- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.

- Super light axle bolt washers as found on Jitsie's Race hubs. - Manufactured from high quality 7075 aluminum alloy. - Ideal for replacing any washers that have been damaged during riding. - Slight indents in the inner surface help prevent the wheel from moving in the dropout. - Fits all standard M6 bolts. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with Jitsie laser etched logo. - 19mm head diameter. - Sold as a pair.

- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 20 x 2.0 size.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.

- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Lightweight rear tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.5" size.

- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- Lightweight but durable non-disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Lightweight but durable disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Standard 6-bolt disc mount. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Strong and affordable 116mm disc hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell. - Standard 6-bolt disc mount is compatible with all trials rotors. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- Jitsie's superlight HS 116mm hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only