Filter By:
- Tires (13)
- Rims (20)
- Hubs (14)
- Spokes (2)
- Nipples (2)
- Tubes (2)
- Small Parts (5)
- Complete Wheels (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$0.12 - $0.20
- DT's standard brass nipples.
- The nipples of choice for most of our trials wheelbuilds here at the shop.
- Stronger and more resistant to rounding off than alloy nipples.
- Available in black or silver.
$0.25 - $0.65
- DT's alloy nipples are a lighter weight alternative to standard brass nipples.
- Great for a lightweight wheelbuild or one that needs some color.
- About 25g per wheel lighter than brass nipples!
$0.75 - $1.00
- DT Champion spokes are affordable, strong straight gauge spokes.
- Great for durable wheel builds.
- 2.0mm thickness
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$1.20 - $1.60
- Lightweight butted spokes from DT Swiss.
- Lighter than straight gauge spokes without sacrificing strength.
- Butted construction with 2.0 width at the ends and 1.8 in the middle.
- Cold forged for extra durability.
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$2.00
- Replacement steel bolt
- M6 x 25mm size
- 5mm allen key head
- Ideal for hub axle bolts
- Sold singly
$3.25
- Spare hub axle spacers from Belgian brand Jitsie.
- CNC machined from high quality aluminum.
- Designed to work with Jitsie hubs, may also work with other brands.
- Narrower side of spacer rests against hub bearing.
- Available in 2mm, 3mm, and 5mm widths.
- All sizes have a 10mm inner diameter and 16mm outer diameter.
- Anodized black only.
- Sold individually.
$4.00
- Replacement bearing for Echo TR 116mm and 135mm rear hubs.
- Double seals keep out dirt and water for smooth running.
- Also fits some other manufacturers hubs.
- ID: 10mm OD: 26mm Width: 8mm
- Sold individually.
$5.00 - $6.00
- Rim strips from Trialtech.
- Heavy duty plastic rim tape is tough yet flexible.
- Strong heat bonded join with a large enough hole for all types of valve.
- Matte finish on one side and gloss on the other.
- Very tough, durable, and also waterproof.
- Available in Black or White.
- Front width 25mm, rear width 40mm.
- 24" width 35mm.
$6.00 - $8.99
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Presta valve is the longer, skinnier valve than the standard schrader.
$6.00 - $9.50
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Schrader valve is the same type of valve you would find on your car.
$6.00
- Durable rim strips from Echo.
- Made from strong yet light plastic.
- Heat-bonded join.
- Available in white only with printed Echo logos.
Widths:
- 28 mm for all front wheel sizes (20", 24", 26")
- 32mm for 24" rear
- 35mm for 19" and 26" rear.
Please Note: width can vary a few mm from strip to strip.
$7.00 - $9.00
- Superlight rim tape from Jitsie.
- Extremely light nylon material is still strong enough to resist tearing and bubbling.
- Significantly lighter than competitor's rim tapes.
- Strong heat bonded join with hole for all valve types.
- Silver/grey with printed Jitsie logos on one side and plain blue finish on the other.
- 30mm front width, 42mm rear width.
$12.00
- Super light axle bolt washers as found on Jitsie's Race hubs.
- Manufactured from high quality 7075 aluminum alloy.
- Ideal for replacing any washers that have been damaged during riding.
- Slight indents in the inner surface help prevent the wheel from moving in the dropout.
- Fits all standard M6 bolts.
- Designed and manufactured in Belgium as part of the Jitsie Race range.
- Available in anodized black or red with Jitsie laser etched logo.
- 19mm head diameter.
- Sold as a pair.
$30.00 - $34.00
- Replacement thru-axle for Crewkerz hubs.
- Compatible with Crewkerz frames and forks only.
- High quality aluminum construction.
- Fitting for T-40 Torx wrench for easy adjustment and less chance of stripping than a standard allen key fitting.
- Available in 9mm front or 12mm rear.
- Anodized red finish.
- Sold individually.
$30.00
- Affordable 20" tire from Jitsie.
- Good mix of durability and performance.
- Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel.
- Classic block tread pattern grips well on all surfaces.
- Tire is designed to work in both directions.
- Sticky rubber compound ensures good grip.
- Wire bead keeps cost down and ensures a secure fit with the rim.
- Available in 20 x 2.25 size.
Please Note: Tires may not have Jitsie logos.
$41.95
- Designed for street riding, the K-Rad works great as a street trials tire.
- As spec'd on many Inspired and other street trials bikes.
- Features an inverted tread design and knurled tread surface that's low profile and fast rolling without sacrificing traction or grip.
- Ribbing between knobs strengthens the casing.
- 24" x 2.3" size is suitable for front or rear use.
$45.00
- The Maxxis Holy Roller is a street-oriented tire used by many street trials riders.
- Low-profile inverted semi-knob tread design is fast rolling with low resistance.
- Lightweight single ply casing keeps weight down.
- Constructed from the 60a MaxxPro rubber compound for a good compromise of grip and durability.
- As spec'd on many Inspired and Czar bikes.
- Available in 24" x 2.4" only.
- Wire bead.
$49.99
- Classic 19" rear trials tire from Maxxis.
- Designed specifically for trials use with input from World Champion Dani Comas.
- Super Tacky rubber compound provides good grip while also maintaining good durability.
- Traditional block style tread is designed to work in both directions.
- Wire bead.
- Available in 19 x 2.5 size.
Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.
$50.00
- Echo's lightweight front rim as found on their complete bikes.
- Constructed from high quality 6061 T6 aluminum.
- Un-eyeletted to save weight.
- 38mm width provides stability and helps prevent tire roll.
- Single wall design with large machined holes saves weight and removes material where it isn't needed.
- Available in 32 hole only.
- Anodized black or red.
$50.00
$70.00
29% Off
- Durable yet light single wall rims from Trialtech.
- Single wall profile reduces unneccessary weight.
- Wide rim profile provides excellent stability at low tire pressures and reduces tire roll.
- Square holes save weight over traditional circular ones.
- Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight.
- Suitable for both disc or rim brakes.
- Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used.
- Available in 32h drilling only.
- Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.
$52.00
- Durable double wall rim from Inspired.
- As fitted to the Inspired Flow bikes.
- Double wall, high quality aluminum construction for maximum strength and stiffness.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- 32mm wide profile.
- Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes.
- Black anodized finish with laser etched Inspired logo.
- 32h spoke drilling only.
$55.00
- Super lightweight 26" front rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 33mm width provides good stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 28 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$56.00
- Echo's new lightweight front 24" rim as seen on their complete bikes.
- Constructed from high quality 6061 T6 aluminum.
- Un-eyeletted to save weight.
- 38mm width provides stability and helps prevent tire roll.
- Single wall design with large machined holes saves weight and removes material where it isn't needed.
- Available in 32 hole only.
- Anodized black.
$60.00
- Fixed non-disc rear hub from Echo.
- Aluminum hub shell and axle keep weight down.
- Sealed bearings provide smooth, durable running.
- Standard 1.37" x 24tpi threads to accommodate threaded cogs.
- Spaced for use with 116mm frames without snail cams.
- Supplied with steel bolts and washers.
- International Standard rotor bolt pattern.
- 32h drilling only.
- Anodized black finish with laser-etched logos.
$60.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo.
- Good mix of durability and performance and low weight.
- Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance.
- Tire is designed to work in both directions.
- Super sticky lightweight rubber compound ensures maximum grip.
- Low block tread design helps save weight.
- Generous spacing between center and outer knobs helps shed mud.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Folding bead.
- Jitsie logos and product info on tire.
- Available in 20 x 2.0 size.
$60.00
- Super lightweight 19" rear rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$60.00
- Super lightweight 20" front rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 33mm width provides good stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 28h and 32h spoke drilling.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$62.00
- Lightweight, competition proven front tire from world famous bike trials brand Monty.
- Developed and tested by multiple time World Champions Abel Mustieles and Dani Comas.
- Low block tread design helps save weight.
- Widely spaced tread pattern increases grip and sheds mud better in natural terrain.
- Cut-outs from the central tread blocks reduce weight further as well as improve grip by allowing the blocks to conform to uneven surfaces.
- Thin sidewalls keep weight to a minimum.
- Slow rebound rubber compound improves grip and gives the tire a predictable feel.
- Folding bead reduces unnecessary weight.
- Available in 20 x 2.0" size.
$62.00
- Lightweight 20" front tire developed by OBR (Owned By Riders) to compliment their Gekok 19" rear tire.
- Unique diamond-shaped tread pattern grips well on all surfaces without adding unnecessary rolling resistance.
- Widely spaced knobs shed mud well.
- Super sticky lightweight rubber compound for maximum grip.
- Low block tread design helps save weight.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Wire bead.
- OBR logos on sidewalls.
- Available in 20 x 2.0" size.
$65.00
- Designed for street riding use, the Team rim offers an excellent strength to weight ratio.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Double wall construction offers good strength and stiffness.
- 20mm holes drilled in the rim help to reduce weight.
- 36mm wide profile helps to prevent tire roll when compared to similar rims available.
- Matte white powder coat finish with black logos.
- Available in 32h spoke drilling only.
Page 1 of 3
Next page