Wheels

- Lightweight 20" front tire developed by OBR (Owned By Riders) to compliment their Gekok 19" rear tire. - Unique diamond-shaped tread pattern grips well on all surfaces without adding unnecessary rolling resistance. - Widely spaced knobs shed mud well. - Super sticky lightweight rubber compound for maximum grip. - Low block tread design helps save weight. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - OBR logos on sidewalls. - Available in 20 x 2.0" size.

- High quality sealed rear disc hub from Trialtech. - 135mm spacing, to fit the majority of modern trials and street frames. - International standard 6-Bolt disc fitting. - Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in. - Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard). - Serrated end caps and bolt washers help keep the bolts tight and the hub in place. - CNC machined aluminium shell. - 32h drilling. - Available in gloss black with laser etched Trialtech 'bashring' logo.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.

- Designed for street riding use, the Team rim offers an excellent strength to weight ratio. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Double wall construction offers good strength and stiffness. - 20mm holes drilled in the rim help to reduce weight. - 36mm wide profile helps to prevent tire roll when compared to similar rims available. - Matte white powder coat finish with black logos. - Available in 32h spoke drilling only.

- Replacement steel bolt - M6 x 25mm size - 5mm allen key head - Ideal for hub axle bolts - Sold singly

- Durable double wall rim from Inspired. - As fitted to the Inspired Flow bikes. - Double wall, high quality aluminum construction for maximum strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 32mm wide profile. - Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes. - Black anodized finish with laser etched Inspired logo. - 32h spoke drilling only.

- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.

- The Inspired Pro V2 rim offers excellent strength and value. - Updated V2 version tested and proven by John Langlois. - Double wall angular profile for increased strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 36mm width gives good anti-roll performance even at low tire pressures. - Available in gloss black anodized finish with white 'Inspired' graphics. - For use with disc brakes only. - 32h spoke drilling only. - Not tubeless compatible.

- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.

- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight. - Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley. - Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!). - Custom butted center section adds strength around the spoke holes for improved durability. - 31mm wide profile gives a good balance of low weight and tire performance. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in sandblast black anodized finish with Carthy Signature laser etched logos. - Available in 28h or 32h spoke drilling. - For use with rim or disc brakes.

- DT's alloy nipples are a lighter weight alternative to standard brass nipples. - Great for a lightweight wheelbuild or one that needs some color. - About 25g per wheel lighter than brass nipples!

- Top quality sealed bearing rear disc hub, as found on Inspired Pro spec bikes. - CNC-machined hub shell features more material in high stress areas to improve durability. - Machined disc side flange reduces weight without compromising strength. - Threaded section uses a conventional 1.37" x 24tpi, suitable for use with 16t (and larger) screw-on freewheels. - ISO disc mount is compatible with all 6-bolt disc rotors. - Fully sealed cartridge bearings provide silky smooth performance in all conditions. - Available with either 10mm bolt-in axle or 12mm through axle options, both with 135mm spacing. - 10mm bolt-in version uses a hollow aluminium axle, with M6 steel axle bolts. Compatible with all Flow and Fourplay/Hex (2019 and earlier) frames. - 12mm version is compatible with Fourplay (2020 onwards) and Hex (2020 onwards) frames, along with all Skye frames. - Available in anodized black with laser etched Inspired logos. - 32h drilling only.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Spare tubes for your trials bike. - A must have for any trials rider. - Schrader valve is the same type of valve you would find on your car.

- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.

- DT Champion spokes are affordable, strong straight gauge spokes. - Great for durable wheel builds. - 2.0mm thickness - Available in black or silver. Please Note: If you are unsure what length spokes you need, please contact us.

- Hope's Pro 4 Trials/Singlespeed hub has become the rear hub of choice for many street trials riders the world over. - Machined from forged 2014 T6 aluminum billet. - 4-pawl ratchet mechanism gives 88 engagement points which ensures a quick, solid pedaling response. - 6-speed steel cassette body (spacers included to convert to single speed) increases durability and makes it harder for cogs to dig into it under trials forces. - 6 bolt International Standard disc mount. - Sealed stainless steel cartridge bearings. - 10mm steel axle bolts (fitted for 8mm allen key) and serrated washers included with bolt-on version. - Conversions available for QR axles. - Compatible with 135mm spaced frames. - Not supplied with spacer lockring. - Available in 32 hole spoke drillings in black. - Sold in 135 x 10 bolt on and 135 x 12mm thru-axle versions. - Available to special order in other configurations including 36 hole drilling and other colors, please contact us for time frame and further info.

- Super light axle bolt washers as found on Jitsie's Race hubs. - Manufactured from high quality 7075 aluminum alloy. - Ideal for replacing any washers that have been damaged during riding. - Slight indents in the inner surface help prevent the wheel from moving in the dropout. - Fits all standard M6 bolts. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with Jitsie laser etched logo. - 19mm head diameter. - Sold as a pair.

- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.