Skip to main content

Filter By:

Echo

Echo SL Brake Clamps
$46.00
- Echo's SL clamps are light and allow for easy fine tuning of brake cylinders. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Anodized finish with laser-etched logos on the top clamps. - Includes titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo SL M6 Brake Clamps
$46.00
- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
Echo Integrated Headset
$48.00
- The Echo Integrated Headset, as found on Echo bikes. - Superlight integrated headset: the bearings press directly into the frame, keeping weight to an absolute minimum. - Easy to install and low maintenance. - Compatible with all Echo, GU, and Czar frames 2015 and newer. - Includes bearings, dust cap wedge, 2 6mm headset spacers, sloping top cap, and titanium top cap bolt. - Not supplied with crown race. - Available to fit standard 1 1/8" frames and 1 1/8"-1.5" tapered frames.
Echo SL 20
$50.00
- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.
Echo TR Non-Disc Front Hub
$52.00
- The classic Echo TR front non-disc hub. - Lightweight 10mm 7075 T6 aluminum axle. - Hub shell machined from durable 2014 aluminum. - Sealed bearings provide smooth and reliable operation in all conditions. - Supplied with durable steel axle bolts. - Spaced at 100mm to fit nearly all trials forks. - Anodized black finish with laser-etched logos. - Available in 32 hole drilling only. Please Note: Echo hubs use 10mm axles which may not fit in some forks that use 9mm dropouts (Trialtech for example).
Echo Urban 4-Bolt Brake Booster
$54.00
- Echo's Urban 4-bolt booster is one of the stiffest boosters available. - Redesigned to be lighter while still offering excellent rigidity for braking. - A great option to stiffen up the brake on a flexy frame. - CNC-machined holes and cutouts reduce unnecessary weight. - Designed to work with most modern trials frames with 4-bolt mounts spaced at 100mm. - Includes 4 mounting bolts and aluminum spacers. - Anodized finish with laser-etched logos.
Echo 4-Bolt Bashplate
$55.00
- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.
Echo SL 24
$56.00
- Echo's new lightweight front 24" rim as seen on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black.
Echo Single Wall 19
$56.00
- Lightweight 19" rim from Echo as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum to improve durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 45mm width provides stability and helps prevent tire roll. - Large holes drilled to minimize weight. - Available in 32 hole spoke drilling only. - Anodized black or red finish.
Echo TR Disc Brake Lever
$56.00
- Replacement Echo TR hydraulic disc brake lever. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - Updated TPA design is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Lever design uses brass bushings to help reduce any play that may develop over time in the lever blade. - Available in black/silver body with anodized red TPA adjuster. - Barb fitting not included. Please Note: This lever is not compatible with any rim brakes as the leverage ratios are different.
Echo TR Headset
$56.00
- The classic Echo TR headset. - Made from durable 2014 aluminum. - Fits 1 1/8" headtubes. - Countersunk top cap bolt mates perfectly with Echo's topcap. - Drilled top cap keeps weight to a minimum. - Anodized finish with laser-etched logos. - Starnut and color-matched 5mm spacer included. Please Note: some TR headsets may now come with updated "E" Echo logos instead of the Echo text on the cups and spacers.
Echo TR Rim Brake Lever
$56.00
- Replacement Echo TR hydraulic rim brake lever. - Main lever body is extruded from 6061 T6 CNC aluminum. - Flip flop lever design allows brake to be run left or right hand. - Updated TPA design is tucked out of the way to prevent damage and also has a large range of adjustment, allowing for customization of lever feel. - Long lever blade provides excellent power and ergonomic shape is comfortable for one finger braking. - Lever design uses brass bushings to help reduce any play that may develop over time in the lever blade. - Available in black/silver body with anodized red TPA adjuster. - Barb fitting not included. Please Note: This lever is not compatible with Echo disc brakes as the leverage ratios are different.
Echo SL 24
$60.00
- The lightweight Echo SL rear rim uses a new single wall design. - Constructed from high quality 6061 T6 aluminum to improve durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 45mm width provides stability and helps prevent tire roll. - Large holes drilled to minimize weight. - Available in 32 hole spoke drilling only. - Anodized black finish.
Echo SL 26
$60.00
- Echo's lightweight SL front rim. - Single wall construction and un-eyeletted design save weight. - 38mm width provides stability and helps prevent tire roll. - Large holes are cnc-machined out of the rim to save further weight. - Constructed from 6061 T6 aluminum to improve durability and brake performance. - Available in 32 hole spoke drilling only. - Black or red anodized finish.
Echo TR Caged Pedals
$60.00
- Echo's classic TR Caged pedals have been updated with a new cage design. - Single cage design is lighter and grippier than traditional double cage pedals. - Super slim cage profile provides more clearance over obstacles. - Pedal body is forged from 6061 Aluminum while the axle is made from heat-treated steel. - Cages are made from 7075 T6 Aluminum making them tough and durable. - New cage design features an indent with slightly lower teeth in the outer edge of the cage. This allows for more freedom of movement for your feet when required (such as when landing sidehops) while also providing more support underneath the foot. - Wider cage (front to rear) than many other caged pedals, making them great for riders with larger feet while still offering superior grip and stability for any size feet. - Sealed cartridge bearings improve durability and run smoothly. - Black pedal body and anodized cages in a variety of colors.
Echo TR Forged Stem
$60.00
- Completely redesigned TR stem from Echo. - Forged from 6061 aluminum for greater durability. - 4-bolt bar clamp allows for easy installation and removal. - Features a sloping steerer clamp, which gives a cleaner look and provides additional clearance when leaning over the bar. - Supplied with sloping top cap and bolt. - Compatible with 31.8mm handlebars. - Available in 150 x 30 size only. - Anodized black only.
Echo TR Threaded Non-Disc 116mm Rear Hub
$60.00
- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.
Echo TR Disc Front Hub
$62.00
- The classic Echo TR front disc hub. - Lightweight 10mm 7075 T6 aluminum axle. - Hub shell machined from durable 2014 aluminum. - Sealed bearings provide smooth and reliable operation in all conditions. - International Standard 6-bolt rotor mounting pattern. - Supplied with steel axle bolts but can also be used with a quick release skewer. - Spaced at 100mm to fit nearly all trials forks. - Anodized black finish with laser-etched logos. - Available in 32 hole drilling only. Please Note: Echo hubs use 10mm axles which may not fit in some forks that use 9mm dropouts (Trialtech for example).
Echo SL 26
$70.00
- Lightweight 26" front rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 28 hole spoke drilling only. - Anodized black finish.
Echo Single Wall 26
$70.00
- The lightweight Echo Single Wall rear rim uses a new single wall design. - Constructed from high quality 6061 T6 aluminum to improve durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 45mm width provides stability and helps prevent tire roll. - Large holes drilled to minimize weight. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Available in 32 hole spoke drilling only. - Anodized black or red finish.
Echo Sprung Chain Tensioner
$70.00
- Sprung tensioner from Echo/Czar as found on their complete bikes. - Single sided design saves weight and makes it easier to take the chain on and off when removing the rear wheel. - Tensioner body and 7t jockey wheels constructed from high quality aluminum alloy. - Durable steel spring keeps the chain tight. - Slim design to help reduce the chance of damage during riding. - Fits Echo and Czar frames 2019 and newer only. - Anodized black finish. - Supplied with mounting bolts.
Echo TR Splined Non-Disc 116mm Rear Hub
$70.00
- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.
Echo SL 19
$75.00
- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.
Echo TR Freewheel
$76.00
- The Echo TR freewheel is one of the most popular and maintenance-free freewheels on the market. - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Constructed from tough CroMo steel for maximum durability. - Unique spring design provides reliable engagement and gives it a loud sound. - Standard 1.37" x 24tpi thread fits all threaded trials cranks. - Available in 18t only. - Although a standard 4-Prong tool can be used to remove Echo freewheels, the Echo Freewheel tool fits much better and is easier to use.
Echo TR Platform Pedals
$76.00
- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!
Echo TR Splined Freewheel
$78.00
- The Echo TR splined freewheel is reliable and easy to install and remove. - One of the most popular and maintenance-free freewheels on the market now in a splined version! - Uses 9 steel pawls to create 108 engagement points for super quick pedal response. - Constructed from tough CroMo steel for maximum durability. - Unique spring design provides reliable engagement and gives it a loud sound. - Featuring Echo's new splined crank/fw interface. The fw simply slides onto the splines on the crank and is held in place by a flared bb spacer (included with cranks). No more hassle trying to remove stuck threaded fws! - Compatible only with Echo splined cranks. - Available in 18t only.
Echo TR Splined Disc 116mm Rear Hub
$80.00
- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.
Echo TR Cranks
$85.00 - $95.00
- Echo's popular TR ISIS cranks. - Forged from 6061 T6 aluminum making them strong and stiff. - Large slot machined into the front of the cranks reduces weight. - Standard 1.37" x 24tpi threads are compatible with all trials freewheels and threaded sprockets. - A freewheel spacer is supplied in case you want to run them without a bashring. - If a bashring is used, it must have a base width of 4mm. - Compatible with all standard ISIS bottom brackets. - Available in 160mm and 170mm. - Anodized black with laser-etched Echo logos.
Echo TR Splined Cranks
$85.00 - $95.00
The Echo splined cranks are great for those looking for a tough, robust cranks that wont slip. Bare in mind that Echo use their own spline system so parts from other brands won't work. - Echo's popular TR ISIS cranks in a splined version. - Forged from 6061 T6 aluminum making them strong and stiff. - Large slot machined into the front of the cranks reduces weight. - Splined crank/freewheel interface allows for easy installation and removal of freewheels. No more fussing with huge pry-bars to remove stuck threaded freewheels! - Designed to work with Echo style pressfit bottom brackets. - Special "top hat" bb spacers (supplied with bb or sold separately) keep the freewheel secured on the splines. - A freewheel spacer is supplied in case you want to run them without a bashring. - If a bashring is used, it must have a base width of 4mm. - Compatible only with Echo splined freewheels. - Available in 160mm and 170mm. - Anodized black with laser-etched Echo logos. Please Note: The Echo splined crank/freewheel system is only compatible with Echo style pressfit ISIS bottom brackets found on Echo, Zoo, Czar, and GU frames as well as others.
Echo TR Splined Non-Disc 135mm Rear Hub
$85.00
- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.