Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

Planet Bike Hardcore Fender Hardware Kit (60mm)
$4.00
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Hardcore Fender Hardware Kit (35mm)
$4.99
- Compatible with Hardcore fenders - 700c x 35mm - Contains 35mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Hardcore ATB Mudflaps
$5.00
- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)
Topeak MTX DeFender
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
Planet Bike Front Fender Release Tabs
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
SKS Mud-X
$6.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
SKS Rubber Straps (Set Of 8)
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
SKS U-Stay Kit for Velo 42 & Velo 47 Fenders
$10.00
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
Mucky Nutz Butt Fender
$10.89 - $15.08
- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications
Planet Bike Grunge Board
$11.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
SKS Shockboard/Shockblade & Dashboard Hardware Kit
$11.99
Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)
SKS X-Board
$12.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
Topeak DeFender RX
$14.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
WTB Mud Guard
$14.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
RockShox RockShox MTB Fender
$14.99
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork – and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs – or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Mucky Nutz Face Fender
$15.08 - $23.47
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face, you guessed it, extra wide for Fatbike applications
Mucky Nutz Gut Fender
$15.08 - $18.43
- Attaches to the down tube using the supplied fasteners - Quick and easy to install and remove - Fat Gut Fender, the perfect fit for fatbike applications
Problem Solvers Fender Flute
$15.95
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
Planet Bike Big Buck Board Downtube Bike Fender
$16.99
A beefy downtube fender for big tires Planet Bike designed the Big Buck fenders to stand up to all of your fat tire adventures. The downtube-mounted fender’s extra wide 5-inch profile shields your shoes and blocks snow, spray and crud when rolling on your 5-inch wide fatties. It's a beefy fender for big tires. - Durable all-weather polypropylene blade - Two-point rubber strap attachment for quick mounting and removal - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Fender width: 110-120mm for 3-5" wide tires - Max tire width: 5" - Weight: 95 grams
SKS Beavertail Fender Set
$16.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
SKS X-Tra Dry
$17.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
Portland Design Works Dave's Mud Shovel Fenders
$18.00 - $24.00
The Dave's Mud Shovel™ fenders are designed specifically for fat bikes. They're extra long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure. Front Fender: Width: 165mm Length: 495mm Rear Fender: Width: 140mm Length: 570mm
Portland Design Works Mud Shovel 6.5 Front Fender
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10"x24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Topeak DeFender FX 279er
$18.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
Topeak DeFender RX 279er
$18.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
Topeak DeFender M1 (26-inch)
$19.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Planet Bike Bog Suspension Fork Front Fender
$19.99
Planet Bike's Bog Suspension Fork Front Fender keeps rain and mud at bay while you play. It's made of a super-durable, all-weather polymer and mounts easily to most suspension forks. And, with the wide profile, you've got extra coverage.
Planet Bike Clip-On Fenders (ATB)
$19.99
You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.
Planet Bike Clip-On Fenders (Hybrid/Road)
$19.99
You only need a couple of seconds to protect yourself and your bike from wet weather. The Clip-On Fenders are made of a durable all-weather polymer so never again will you arrive at work with a rain streak up your back again. And because they're clip-ons, you can easily remove the fenders on sunny days.
Planet Bike Grunge Front Bike Fender
$19.99
The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams
Page 1 of 4 Next page