Brakes/Levers/Pads

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Replacement brake line for Hope disc brakes. - Constructed from durable yet flexible material. - 5mm external diameter. - Supplied cut to length in 1 foot increments.

Replacement reservoir cap screw for Hope brakes.

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes

· CNC machined in Barnoldswick, England · Includes mounting bolts · Adds 20mm of disc rotor diameter to dedicated IS calipers for use on post mount forks or frames (i.e a 160mm caliper would require the use of a 180mm rotor)

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes

· CNC machined in Barnoldswick, England · Includes mounting bolts

· CNC machined in Barnoldswick, England · Includes mounting bolts

Replacement pads for Hope E4 hydraulic disc brakes.

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XTR SL-M970 2006-2010, XTR SL-M980 and M980-I from 2011 to present and XT SL-M780-I 2012 · Works on Hope Race and Race Evo levers only

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. • Sold in pairs • Contains two shifter mounting bolts and four lever clamp bolts • SRAM mount allows use of X9, X0 and XX shifter bodies

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XT SL-M770 2008-2011, Saint SL-M810 2009-2012 and SLX SL-M660 2009-2012 · Works on Hope Tech and Tech Evo levers only

Hope's 2-piece rotors have a stainless steel braking surface riveted to an aluminium central carrier. As well as offering a significant weight saving, they also allow the rotors to expand or contract with changes in temperature. · CNC machined and laser cut in Barnoldswick, England · Lighter design · Allow for smoother braking

Hope Brake Line kits • Works for front or rear • Made for Hope by Goodridge • Fits most manufacturer's disc brakes • Braided stainless steel line • Hose length: 1600mm • Hose OD: 6mm • Hose ID: 2.4mm

Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm

• Rigid CNC'd one piece caliper • Increased piston diameter • Tech 3 lever offers 5% more power compared to our previous lever • Ergonomic design to fit around other handle bar items • The Tech 3 lever is directly compatible with Shimano I-Spec shifters

Hope Disc Brake Caliper and Levers • For race, cross-country or trail use; 2-piston caliper • Uses lightweight, black, polyester-reinforced line • Titanium hardware, alloy-backed X2 pads • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer • Split clamp design allows for quick adjustment and the lightweight machined alloy lever features a textured grip area • Lever reach is adjustable via an Allen key • Levers are right- or left-hand specific

• On the fly Bite Point Control and Reach adjustment • Direct compatibility with Shimano I-Spec shifter • Direct mount available for SRAM shifters • New piston dust cover design • New reservoir diaphragm design • CNC machine in Barnoldswick, England • 2014 T6 aluminum alloy • Wide angle hose connector mount • Floating or vented rotor compatible • Goodridge braided hose

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer

Hope V-Twin Remote Disc Brakes. The dual master cylinder fits onto a special bracket under the stem, giving the powerful brakes which dropbar bikes are usually lacking and keeps the run of cable as short as possible. The transition from cable to hydraulic is achieved with a simple piston system, removing the need for complicated levers. • CNC machined in Barnoldswick, England • Rotors not included • Includes master cylinder and front and rear calipers • Integrated brake fluid reservoir actuated by short cable-pull road levers • 9.74 caliper with all mount options • 2014 T6 aluminium alloy • Wide angle hose connector mount • Top entry pad fitting