Cables

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.

The Road Elite Sealed Brake Kit uses a continuous liner that seals the system completely and protects it against dirt, mud and debris. Available in unique three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the lowest possible friction, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the brake caliper offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Low-compression housing results in crisp brake lever feel - 2.4mm inner liner may not be compatible with all frames and components What's Included: - 1x 2200mm CSX Brake Housing - 1x 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable - 1x 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable - 1x 1275mm Slick-Lube Liner - 1x 1925mm Slick-Lube Liner - 2x Open Brass End Caps - 4x Open Alloy End Caps - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Hydraulic Fittings Combo Box is a handy parts box for your home shop that includes a variety of common fittings and seals for a range of disc brakes from Avid, Formula, Hayes, Magura, Shimano and Tektro.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. 2x Elite Link Shift Kits are spec'd for use on road or mountain bikes that use both a front and rear derailleur. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps for a bike with both a front and rear derailleur, with split (non-continuous) cable housing - Bikes with continuous housing and/or extra-large frames may need additional links and/or liners; service parts are available separately

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Lined end caps have an internal sleeve that extends out from the end. This liner protects the inner cable from the opening in the end cap, preventing cable coatings from wearing off and ensuring the lowest possible friction. Lined end caps can also be paired with a sealing liner or a dirt guard to keep dirt and grime out of the housing. Use lined end caps whenever you use Teflon-coated cables to protect the coating.

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Extend housing runs using these double-ended junction end caps.