Filter By:
- Forks (2)
- Drivetrain (19)
- Steering (4)
- Braking (15)
- Wheels (7)
- Show More Sizes
- Show Fewer Sizes
Trialtech
$18.00
- High quality, CNC machined cromoly snail cam from Trialtech.
- Gloss nickel, hard coated finish for extra durability.
- A series of incrementally smaller drilled holes are designed to reduce weight without compromising strength.
- Notched design to hold your wheel in position and ensure that it doesn't move, designed to be a 'fit-and-forget' product.
- High resolution tooth pattern provides fine chain adjustment.
- Will fit most bikes with a 10mm axle designed to work with snail cam tensioners.
- Sold individually to allow you to tailor your setup to your specific needs.
$15.00 - $16.00
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes.
- Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit.
- Longer than standard hose helps to prevent kinking and reduced performance during use.
- Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other.
- M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes.
- Sold singly.
Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$15.00
- Replacement brake lever piston for Trialtech rim brake levers.
- Precision injection molded using low water absorbtion plastic.
- Available with Sport or Carthy specification seals.
- Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress.
- Compatible with both Sport and Carthy lever models.
- Sold individually.
$12.00
- 10mm chain tugs from Trialtech.
- Fits most 20" mod bikes and some 26" bikes.
- CNC machined aluminum construction, with M6 threaded bar to keep weight down while maintaining maximum functionality.
- Guides on the main body prevent the tug from rotating when tightening the axle bolts.
- Sold as a pair.
$12.00
- Replacement bearing to fit Spanish bottom brackets only.
- Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others.
- High quality construction with double seals.
- For use on the drive or non-drive side.
- Sold singly.
- OD:37mm, ID:22mm, Width:9mm
$10.00
$15.00
33% Off
- Replacement threaded top cap for Trialtech forks.
- Fits Trialtech Sport 20" and 26" forks.
- CNC machined from 6061 Aluminum.
- Available in anodized black only.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes.
- Compatible with all brake clamps that require the traditional Magura cylinder washer.
- Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting.
- Aluminum construction makes the washers more durable than standard plastic washers.
- Anodized gloss black finish.
- Sold as a pair (for one brake).
$8.00
- Replacement piston spring for Trialtech brake levers.
- Precision taper wound design for improved function and durability.
- Fits Sport or Carthy brake levers.
- Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech.
- Lightweight, durable material.
- 5mm external diameter.
- Available in Black, Blue, Green, Red, White, Yellow and Clear.
- Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose.
- Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech.
- Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster.
- Fits standard M5 brake clamp bolts.
- Available in anodized black only.
- Supplied as a pair.
$6.00
- Quality bleed hose for hydraulic rim brakes.
- M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes.
- Can be used as an inlet or outlet hose.
- Supplied with Trialtech barbed connector fitted to a 23cm long hose.
- Ideal for use with Trialtech bleed syringes.
- Sold individually.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake.
- Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes.
- Available in Large (60ml) or Small (24ml) volume.
- Sold individually.
$5.00 - $6.00
- Rim strips from Trialtech.
- Heavy duty plastic rim tape is tough yet flexible.
- Strong heat bonded join with a large enough hole for all types of valve.
- Matte finish on one side and gloss on the other.
- Very tough, durable, and also waterproof.
- Available in Black or White.
- Front width 25mm, rear width 40mm.
- 24" width 35mm.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers.
- High quality CNC-machined Cr-moly steel construction.
- Second barb is slightly larger diameter to provide a secure fit and better seal.
- Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses.
- M6 x 1mm thread.
- Tough black finish.
- Sold singly.
$4.00
- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings.
- Standard M6 x 1.0 thread.
- For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.
Previous page
Page 2 of 2