Skip to main content

START Klisters

START Klisters
  • Options: Base
  • Options: Universal Wide
  • Options: Universal Plus
  • Options: Red
  • Options: Special
  • Options: Purple
  • Options: Blue
Please select options


- Start Klisters provide grip in a wide variety of conditions.
- 55g tube.

Base Klister
Used as a base for other klisters to keep grip consistent and provide durability.

Universal Wide Klister
-5°C to +10°C (23°F to 50°F)
For variable snow conditions or for blending with other klisters and soft kickwaxes.

Universal Plus Klister
1°C to 10°C (34° to 50°F)
For warm wet snow and blending with other klisters.

Red Klister
For wet conditions.

Special Klister
-2°C to +2°C (28° to 36°F)
For conditions near freezing.

Purple Klister
-5°C to 0°C (23° to 32°F)
For conditions near freezing.

Blue Klister
-15°C to -4°C (5° to 25°F)
For cold icy tracks.

Waxing with klisters

Clean the grip zone with ski wax remover liquid. When using klisters, the grip zone is generally shorter than when using hard waxes (30 – 50cm). 

2. Abrade the grip zone with 80 – 120 grit sandpaper. 

3. Warm the klister in its tube with a hot air gun, hairdryer or hot water. Warm klister is softer and easier to apply in an even layer. 

4. Squeeze klister onto the grip zone, on both sides of the groove approximately every 5 centimetres. 

5. Spread the klister with your thumb, hand or with a cork to an even layer. 

6. Clean any excess klister from the groove and sidewalls of the ski. 

7. Allow the skis to cool outside before skiing. 

Note! Finished klister waxing should not be touched with your hands.

Part Numbers

Option UPC MPN Store SKU
Base 6418016018904 01890 STA16226149R
Universal Wide 6418016018362 01836 STA2564527R
Universal Plus 6418016018379 01837 STA257932R
Red 6418016018201 01820 STA18165227G
Special 6418016018225 01822 STA22591623G
Purple 6418016018249 01824 STA21686643G