Simple, clean design keeps everyone dry and is super easy to install on a wide variety of bikes. - Six-inch-long front and rear "shower curtain" courtesy flaps keep your feet dry and the mud out of the face of your fellow riders - Front fender stays are shaped to work around disc brake calipers - Safety breakaway hardware on front fender - Fit may vary depending on the tire/rim combination - Stainless steel mounting hardware, fender bridges, and fender stay clamps
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$18.00 - $24.00
The Dave's Mud Shovel™ fenders are designed specifically for fat bikes. They're extra long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure. Front Fender: Width: 165mm Length: 495mm Rear Fender: Width: 140mm Length: 570mm
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 38–45
- The Syncros Trail Fender keeps dirt out of your face! - Fits on Fox 34 Boost and 36 Boost forks. - Mounts with two screws (included) that fit into the back of the fork arch. - Clean, simple, and light. - Available in black only. The Syncros Trail Fender is made from a high-quality Impact PP that balances stiffness and durability. Designed to work specifically with Fox? 34 & 36 Boost forks, the Trail Fender features a 2-bolt direct mount. This means a clean and reliable mount that is easily removable.
- Designed for FOX 34 Step Cast forks with an optimized ft through two screws on fork arch. - The highest level of integration, durability, and protection from mud - Mounted with 2 supplied Torx screws, tool included
- Like Syncros's standard Trail Fenders, the DH Fender integrates perfectly with a Fox 49 fork to offer the perfect solution for when trail conditions are of the wet kind. - Fully customizable, you can mount the full set, (extending either side of the fork) or the rear part only depending on riding conditions. - Mounts securely into the bridge, no need for zipties for the ultimate clean look. - Fully compatible with both FOX 40 / 27" and FOX49 / 29" wheel size thanks to 2 sets of mounting holes. - Available in black only.
Page 1 of 1