Filter By:

26" Frames

Echo Mark 6 26
$330.00
- Newly updated frame from Echo as found on their Mark 6 and Mark 6 Pro complete bikes. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 135mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional sprung tensioner. - Now featuring a 1 1/8" - 1.5" tapered headtube for a stiffer, stronger front end. - Large hole machined out of headtube reduces weight. - Updated with Echo's new Integrated Tapered Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Integrated brake booster and brake mounts are machined from a single piece of aluminum to improve braking power. - Top and down tube gussets at the head tube add stiffness and improve frame life. - Features dedicated 4-bolt mounts spaced at 99mm. - Uses M6 brake clamp bolts instead of the traditional M5 for additional stiffness. - Available in an anodized black finish with laser-etched Echo graphics. - Frame supplied with M6 brake clamps and steel spindle bottom bracket. Geometry: - Wheelbase: 1075mm (with 30mm offset fork) - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 73.5° - Head Tube Length: 110mm - Reach: 675mm
Echo Mark Ti 26
$400.00 $540.00 26% Off
- Echo's updated Mark Ti frame now with a tapered headtube. - Features Echo's press-fit Spanish bottom bracket system which gives a longer bottom bracket life and increased strength. - CNC machined horizontal dropouts spaced at 135mm give a large weld area for the chain and seat stays, providing added strength. - Uses Echo's simple and lightweight integrated chain tensioners. Grub screws push against the axle and are tucked out of the way and won't get smashed like a traditional tensioner. - New tapered headtube increases strength and stiffness in the front end. The top bearing is 1 1/8" while the lower bearing is 1.5". - Large hole machined out of headtube reduces weight. - Uses Echo's Integrated Tapered Headset (sold separately) in which the bearings press directly into the frame, reducing weight and stack height. - Seat tube has been replaced by drilled out cnc plates, giving the frame a unique look and reducing weight while maintaining a stiff rear end. - New integrated brake arch and brake mounts replace the upper seatstays with a single machined piece of aluminum to improve braking power. - Top and down tube gussets at the head tube add stiffness and improve frame life. - Features dedicated 4-bolt mounts spaced at 99mm. - Uses M6 brake clamp bolts instead of the traditional M5 for additional stiffness. M6 Echo SL brake clamps supplied with frame. - Available in an anodized black finish with laser-etched Echo graphics on downtube and stickers elsewhere. - Frame supplied with titanium bottom bracket installed. Geometry: - Wheelbase: 1085mm (with 30mm offset fork) - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 72° - Head Tube Length: 100mm - Reach: 660mm
Page 1 of 1