Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Jitsie

Jitsie Platform Pedals
$80.00
- Platform pedals from Belgian brand Jitsie. - CNC machined from durable 6061-T6 aluminum. - Slight concave pedal body shape provides maximum foot/pedal contact. - 20 steel pins per pedal ensure optimal grip and confidence. - Strong, reliable steel axle with 6mm allen key fitting in the back and 15mm wrench flats for easy installation and removal. - Sealed bearings for superior durability and smooth running. - Low profile shape gives great ground clearance. - Chamfered edges help to minimize weight and deflect impacts. - Available in anodized black with laser-etched Jitsie logos. - Supplied with spare pins.
Jitsie Non-Disc 116mm Rear Hub
$75.00
- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.
Jitsie Rear Race Rotor
$70.00
- High performance rear rotor from Jitsie. - Manufactured from Jitsie's exclusive formulated steel. - 6 bolt international standard fitting. - 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts). - Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads. - Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors. - Laser-etched logos. - Rotor bolts not included.
Jitsie Reverz 26
$68.00
- Lightweight rear tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.5" size.
Jitsie 72.6 Freewheel
$65.00
- The Jitsie 72.6 freewheel is a great quality, affordable freewheel. - Forged steel construction offers great durability. - 6 steel pawls mounted in groups of 3 with 36 teeth result in 72 engagement points. - Black finish with black inner plate displaying logo and product details. - Standard 1.37" x 24tpi thread to fit all threaded trials cranks or hubs. - Available in 18t only. Please Note: These now feature Jitsie logos instead of Tr1al.
Jitsie Forged Cranks
$65.00
- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.
Jitsie Reverz 19
$65.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.
Jitsie Reverz 26
$65.00
- Lightweight front tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability, performance, and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.0" size.
Jitsie Single Wall 24
$65.00
- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
Jitsie Single Wall 26
$65.00
- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
Jitsie Dynamic Long Knee Guards
$55.00 - $60.00
- Light, flexible long knee guards from Jitsie. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra and mesh fabrics provide excellent comfort. - Padding extends below knee for added shin protection. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your leg. - Durable flexible print with Jitsie branding. - Available in SM/MD and LG/XL. The protective pads are the same size on both sizes. The difference in size comes from the material that fits around your leg. - Calf size (circumference) SM/MD: 33-40cm/13-16" - Calf size (circumference) LG/XL: 38cm+/15"+
Jitsie Full Bashring
$60.00
- Lightweight full bashring from Jitsie. - As found on their Varial Hybrid bike. - CNC machined from super strong 7075 T6 aluminum. - Asymmetric design provides full protection while reducing unnecessary material where it isn't needed. - Machined cutout further reduces weight. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Black anodized finish with laser etched Jitsie logos.
Jitsie Reverz 20
$60.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 20 x 2.0 size.
Jitsie Single Cage Pedals
$60.00
- Jitsie's lightweight caged pedals. - Super grippy low profile cage machined from 7075 T6 aluminum. - 3mm cage thickness provides durability and resists bending. - Steel axles provide excellent strength. - Cages feature side slots to reduce weight. - Pedal body features ribs where the arms attach to the main body, which increases strength over other similarly designed pedals. - Teeth on outer edge of cage are slightly less sharp than the rest of the cage to prevent them from digging in to your foot when you're twisting for balance. - Sealed bearings help keep out dirt and grit. - Axle ends fitted for 6mm allen key for easy installation and removal. - Anodized black or red cages and black body with laser-etched Jitsie logos.
Jitsie Single Wall 19
$60.00
- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
Jitsie Single Wall 20
$60.00
- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
Jitsie Barb Fitting Press Tool
$55.00
- Jitsie's Barb Fitting Press makes it easy to install barb fittings in hydraulic brake lines. - Machined aluminum construction for maximum durability. - Lower clamp holds hose in place, while the upper threaded section presses the insert into the hose. - The tip of the barb driver can be flipped over to suit virtually any brake line fittings you're using.
Jitsie Brake Clamps
$55.00
- The Jitsie brake clamps are an innovative CNC component from the Belgian manufacturer. - CNC-machined from quality 7075 alloy. - Designed to be used without plastic cylinder washers to improve clamping power and ease of installation. - Clamps feature different heights - 7mm and 9mm. This can be very useful when your frame or fork has very low-profile brake mounts. The clamps can be mounted either side up to adjust how far the cylinders sit above the frame. - Designed and manufactured in Belgium as part of the Jitsie Race range.
Jitsie Single Wall 26
$55.00
- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
Jitsie Dynamic Shinguards
$50.00
- The Jitsie Dynamic shinguards are innovative lightweight protectors made with the rider in mind. - The 'less-is-more' concept applied throughout the development process has resulted in a great shinguard that sets the standard in bike trial! - Developed and tested with Jitsie Team riders such as Dani Comas. - Constructed with lightweight flexible fabrics for an unrestricted feeling on the bike. - Mesh panel on the rear of the guard for optimal ventilation. - Updated with a lightweight memory foam panel inside a pocket in the shinguard that provides secure protection without being bulky. - Foam panel is removable to allow for easy washing. - High quality lycra and mesh fabrics provide a snug, comfortable, and secure fit. - Available in SM/MD and LG/XL adult sizes that use a 26cm long dense foam plate that protects the most vulnerable areas of the shin. - The Youth size is fitted for small legs (typically under age 11) and features a 20cm long protective plate that is also a bit narrower than the adult size. - Elastic cuffs keep the shinguard nicely in place while riding. - Super light, they are very minimal and easily fit under pants or over tights.
Jitsie Dynamik Elbow Guards
$50.00
- The Jitsie Dynamik elbow guards ensure trustworthy elbow protection without restricting movement while riding. - Lightweight memory foam protector provides good protection while still being flexible. - High quality lycra is flexible and comfortable. - Mesh fabric panel on the inside of the arm provides ventilation. - Elastic top and bottom cuffs with silicone inserts keep the pads secured on your arm. - Durable flexible print with Jitsie branding. - One size fits all. - Sold as a pair.
Jitsie Forged Stem
$45.00 - $50.00
- Excellent value forged stems from Jitsie. - Available in 35° angle and a variety of lengths to suit any rider and bike. - 3D forged from 6061 alloy for an optimal strength/weight ratio. - 4-bolt bar clamp allows easy installation of handlebars. - Steerer clamp features rounded edges to help prevent knee injuries. - High quality M6 bolts on steerer and handlebar clamps offer excellent strength and reliability. - 31.8mm oversized clamp. - Available in anodized black with white Jitsie graphics.
Jitsie Internal Headset
$46.00 - $50.00
- Internal headset from Jitsie as found on their complete bikes. - Sealed bearing design keeps out dirt and grit for smooth running. - Aluminum cups reduce weight without sacrificing durability. - Split crown race for easy installation and removal. - Black anodized finish with laser-etched Jitsie logos. - Available in straight 1 1/8" and tapered 1 1/8"-1.5" sizes. - 1 1/8" fits frames with a 44mm internal diameter headtube with a standard 1 1/8" fork. - 1 1/8-1.5" fits frames with a 44mm internal upper diameter and 56mm internal lower with tapered 1 1/8-1.5" forks. - Star nut and top cap not included.
Jitsie Race Rim Brake Pads
$48.00
- High performance CNC rim brake pads from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - Glued to Jitsie's newly designed CNC backing, which is shaped to provide a precise fit with the brake caliper to eliminate the pad "knock" often found with plastic-backed pads. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - Compatible with all hydraulic rim brake systems on the market including Magura, Echo, and Racing Line. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair. Please Note: Due to the super stiff characteristics of the metal backings, it is important to set up these pads so that they are completely square with the rim. Otherwise they will wear unevenly, leading to decreased brake performance and pad life.
Jitsie Mini Bashplate
$40.00
- Lightweight 4-bolt bashplate from Jitsie as found on their 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with mounting bolts and spacers. - Anodized black finish with laser-etched Jitsie logos. - Designed for Jitsie Varial frames, also compatible with some Clean, Ozonys and other frames.
Jitsie Half Bashring
$38.00
- Lightweight half bashring from Jitsie. - Designed and developed with World Champion Dani Comas. - CNC machined from 7075 T6 aluminum. - Asymmetric width for optimal protection while decreasing weight as much as possible. - Teeth on outer edge provide additional grip. - Compatible with nearly all modern threaded trials cranks. - Designed to cover 18t cogs or freewheels. - Laser etched Jitsie logo.
Jitsie Race Snail Cams
$38.00
- The Jitsie snail cams are lightweight, high quality chain tensioners. - Innovative, asymmetrical shape allows for precise chain tension. - CNC machined from 7075 T6 aluminum. - Design based on snail cams used in motorcycle trials with multiple cut outs in the shape to drop as much weight as possible without sacrificing durability and strength. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Laser-etched Jitsie logos.
Jitsie G2 Solid Gloves
$36.00
- The Jitsie G2 Solid glove is a lightweight glove designed specifically for perfect control and comfort in trials. - Stitchless palm design prevents bunching and irritation when the hand is wrapped around the handlebar. - Clarino©? palm material provides exceptionally tactile feel for superior control and comfort. - Flexible mesh upper portion and stretch panels on the sides of the fingers give the glove a very airy feel and allow for excellent freedom of movement. - Soft moisture wicking fabric on thumb to wipe sweat. - Slim embossed cuff with minimal velcro closure tab keeps the gloves secure on your hand. - Patch on the thumb provides additional reinforcement and adds durability to this high stress area that often wears out on non-trials gloves.
Jitsie Alloy Crank Bolts
$35.00
- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.
Jitsie Disc Protector
$30.00
- The Jitsie brake disc protector is a light, minimalistic guard to keep your rear disc rotor protected. - Manufactured from high quality 7075 T6 aluminum. - Exclusive design by Jitsie, tested and approved by multiple time World Champion Dani Comas. - 3mm thick with cutouts to keep weight to a minimum. - Laser-etched Jitsie logo on the bottom of the guard. - Designed in Belgium and manufactured in the EU as part of the Jitsie Race range. - Fits over the hub axle on the inside of the frame dropout. It takes up 3mm of axle width so you will need to machine or cut down your existing hub spacer or get a new hub spacer with a 3mm narrower width. - Designed to work with 160mm rotors only. Please Note: This is designed to protect from accidental collisions, not to be used as an aid in climbing obstacles.