Filter By:
- Complete Trials Bikes (12)
- Frames (12)
- Forks (6)
- Drivetrain (58)
- Steering (27)
- Braking (68)
- Wheels (59)
- Clothing and Protection (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Trials Bikes & Gear
$0.12 - $0.20
- DT's standard brass nipples.
- The nipples of choice for most of our trials wheelbuilds here at the shop.
- Stronger and more resistant to rounding off than alloy nipples.
- Available in black or silver.
$0.25 - $0.65
- DT's alloy nipples are a lighter weight alternative to standard brass nipples.
- Great for a lightweight wheelbuild or one that needs some color.
- About 25g per wheel lighter than brass nipples!
$0.75 - $1.00
- DT Champion spokes are affordable, strong straight gauge spokes.
- Great for durable wheel builds.
- 2.0mm thickness
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$1.00
- Replacement steel bolt.
- M5 x 25mm size.
- 4mm allen key head.
- Ideal for brake clamp bolts (without brake booster).
- Sold singly.
$1.00
- Replacement pedal cage bolts from Echo.
- M5 thread with countersunk head.
- Constructed from steel for maximum durability.
- Bolt head fitted for 3mm allen key.
- Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All.
- Sold individually.
$1.00 - $2.00
- Replacement stem bolts for Echo stems.
- M6 x 20mm size.
- Fitted for 5mm allen key.
- May also fit other stems.
- Available in steel with black or silver finish or titanium.
$1.00
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.00 - $2.00
- Replacement master link for KMC singlespeed chains.
- Allows the chain to be conveniently removed without a chain tool.
- Includes connecting link and retaining clip.
- Available in 3/32" (silver) and 1/8" (grey) sizes.
$1.00
- Replacement clamp bolt for 2005-2010 Magura HS33 brake levers.
- Made from steel for maximum durability.
- M5 x 18mm
- Sold individually.
$1.00
- Disc brake caliper mounting bolt from Magura.
- Steel construction for maximum durability.
- M6 x 16mm size is ideal for disc brake mounting bolts, but also works for other applications.
- Head fitted for 5mm allen key.
- Pre-applied loctite helps keep bolts secure.
- Sold singly.
$1.20 - $1.60
- Lightweight butted spokes from DT Swiss.
- Lighter than straight gauge spokes without sacrificing strength.
- Butted construction with 2.0 width at the ends and 1.8 in the middle.
- Cold forged for extra durability.
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$1.50
- Replacement olive/compression ferrule from Magura.
- What you'll need if you want to shorten the brake lines on your hydraulic rim brakes.
- Compatible with all hydraulic rim brakes including Magura, Racing Line, Echo, and others.
- Sold singly.
$2.00
- Replacement steel bolt
- M6 x 25mm size
- 5mm allen key head
- Ideal for hub axle bolts
- Sold singly
$2.00
- Compression ferrules from Racing Line
- Made from copper, which makes them slightly softer than Magura olives.
- Recommended for use with Racing Line aluminum compression nuts since they can be compressed with less force and are less likely to damage the softer aluminum fittings.
- Compatible with all Magura and Racing Line brakes.
- 5mm inner diameter
- Sold singly.
$2.00 - $5.00
- Basic aluminum headset spacers from Wheels Manufacturing.
- For 1 1/8" headsets.
- Anodized black.
- Available in 1.5mm, 2.5mm, 5mm, 10mm, and 20mm heights.
$3.00
- Replacement brake line for Hope disc brakes.
- Constructed from durable yet flexible material.
- 5mm external diameter.
- Supplied cut to length in 1 foot increments.
$3.00 - $5.00
- Single half link from KMC.
- The half link is an outer link that reduces to an inner link, making it half the length of a normal link.
- Very useful for getting chain length or gearing just right.
- Available to fit 1/8" or 3/32" chains.
- Grey finish.
$3.00
- Replacement steel Magura M6 Barb Fitting.
- Compatible with Magura, Racing Line, Trialtech, and Echo brake line.
- Sold singly.
$3.00
- Replacement Magura compression sleeve nut, also known as a shroud nut.
- Allows a standard hose to be fitted to cylinders and levers using a new olive.
- Compatible with pre-2011 Magura levers and all Racing Line levers and Magura slave cylinders.
- Sold singly.
$3.00
- Replacement Magura compression sleeve nut, also known as a shroud nut.
- Allows a standard hose to be fitted to levers using a new olive.
- Compatible with 2014 and newer Magura HS33 levers as well as Magura MT disc brake levers.
- NOT compatible with any pre-2014 Magura levers.
$3.25
- Spare hub axle spacers from Belgian brand Jitsie.
- CNC machined from high quality aluminum.
- Designed to work with Jitsie hubs, may also work with other brands.
- Narrower side of spacer rests against hub bearing.
- Available in 2mm, 3mm, and 5mm widths.
- All sizes have a 10mm inner diameter and 16mm outer diameter.
- Anodized black only.
- Sold individually.
$4.00
- Replacement bearing for Echo TR 116mm and 135mm rear hubs.
- Double seals keep out dirt and water for smooth running.
- Also fits some other manufacturers hubs.
- ID: 10mm OD: 26mm Width: 8mm
- Sold individually.
$4.00
- Replacement bleed bolt for 2016 Racing Line levers and brakes.
- TC4 titanium construction.
- M6 thread.
- Fitted for use with Torx T-25 tool.
- Fits 2016 Racing Line levers and slave cylinders only, not compatible with Magura or earlier Racing Line brakes.
- Maximum torque 3Nm.
- Nylon washer not included.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers.
- High quality CNC-machined Cr-moly steel construction.
- Second barb is slightly larger diameter to provide a secure fit and better seal.
- Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses.
- M6 x 1mm thread.
- Tough black finish.
- Sold singly.
$4.00
- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings.
- Standard M6 x 1.0 thread.
- For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.
$4.50
- Lightweight titanium replacement grub screw/blanking bolt for Racing Line brake levers.
- M6 thread size
- New design features an o-ring on the bottom of the bolt, improving the seal over traditional grub screws.
- Constructed from titanium.
- Available in anodized black, gold or rainbow finish.
- Compatible with Racing Line FL001 and Nano 28 levers only!
- Maximum bolt torque 3Nm!
Please Note: A small amount of grease should be applied to the threads before installation and it is imperative that these are not over-tightened. Doing so can result in the lever leaking!
$4.50
- Lightweight titanium replacement grub screw/blanking bolt for 2005-2010 Magura HS33 levers.
- M6 thread size with tapered end fits Racing Line, Magura, Echo CNC, SL and TR rim brakes.
- Fitted for a 3mm allen key.
- Maximum bolt torque 3Nm!
- Sold individually.
$5.00
$10.00
50% Off
- Spare hangers to fit Koxx Level Boss frames.
- Supplied without mounting bolt.
$5.00
$10.00
50% Off
- Replacement derailleur hangers for older Monty frames.
- Hydra hanger includes mounting screws, hangers 1 and 2 include mounting bolts (not pictured).
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake.
- Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes.
- Available in Large (60ml) or Small (24ml) volume.
- Sold individually.
$5.00 - $6.00
- Rim strips from Trialtech.
- Heavy duty plastic rim tape is tough yet flexible.
- Strong heat bonded join with a large enough hole for all types of valve.
- Matte finish on one side and gloss on the other.
- Very tough, durable, and also waterproof.
- Available in Black or White.
- Front width 25mm, rear width 40mm.
- 24" width 35mm.
$5.00
- Miscellaneous Webcyclery labor charge.
- To be used by Webcyclery staff only, unless directed.
$5.00
$10.00
50% Off
- Replacement derailleur hangers for Woodman frames.
- Supplied with mounting bolt.
$5.00
$10.00
50% Off
- Replacement derailleur hangers for Zhi frames.
- Supplied without mounting bolt.
$6.00 - $8.99
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Presta valve is the longer, skinnier valve than the standard schrader.
$6.00 - $9.50
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Schrader valve is the same type of valve you would find on your car.
$6.00
- Replacement set of rotor bolts from Avid/Sram.
- Constructed from durable steel.
- Head fitted for a T25 Torx key.
- Supplied with loctite applied to prevent loosening.
- Sold as a set of 6 for one rotor.
$6.00
- Durable rim strips from Echo.
- Made from strong yet light plastic.
- Heat-bonded join.
- Available in white only with printed Echo logos.
Widths:
- 28 mm for all front wheel sizes (20", 24", 26")
- 32mm for 24" rear
- 35mm for 19" and 26" rear.
Please Note: width can vary a few mm from strip to strip.
$6.00
- Replacement TPA Bushings from Racing Line.
- Bushings sit on both sides of TPA wheel to hold it in place.
- Fits 2005-2010 Magura HS33 and Racing Line levers.
- Sold as a pair (for one brake).
$6.00
- Replacement superlight titanium Racing Line compression sleeve nut, also known as a shroud nut.
- Compatible with Magura HS33 2005-2010 levers and Magura slave cylinders
- Less than half the weight of standard steel compression nuts.
$6.00
- Quality bleed hose for hydraulic rim brakes.
- M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes.
- Can be used as an inlet or outlet hose.
- Supplied with Trialtech barbed connector fitted to a 23cm long hose.
- Ideal for use with Trialtech bleed syringes.
- Sold individually.
$7.00 - $9.00
- Superlight rim tape from Jitsie.
- Extremely light nylon material is still strong enough to resist tearing and bubbling.
- Significantly lighter than competitor's rim tapes.
- Strong heat bonded join with hole for all valve types.
- Silver/grey with printed Jitsie logos on one side and plain blue finish on the other.
- 30mm front width, 42mm rear width.
$7.00
- Racing Line grease.
- Specially formulated for use with o-rings on Racing Line brakes.
- Helps keep o-rings on hydraulic rim brakes sealed and lubricated.
- Also works great on bolts and other items requiring grease.
- 3g.
$7.00
- Replacement o-rings for Racing Line levers.
- If your lever is starting to leak, new o-ring seals can often give it new life.
- Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.
$7.00
- Tar is the long-used method of improving rim brake performance without grinding.
- To apply, simply spin your wheel and lightly scrub some tar onto the braking surface.
- Only a small amount is needed for each application.
- Can be used with both smooth and ground rims.
- For use with rim brakes only.
- Block of tar measures approximately 3cm x 3cm x 5mm
- Sold singly
$7.00 - $8.00
- Lightweight replacement titanium pivot bolt for Racing Line levers.
- CNC-machined from titanium.
- Compatible with Racing Line FL001 and Nano 28 levers and Freno levers.
- T25 Torx fitting on both ends resists rounding out better than allen fittings.
- Available in anodized black or gold.
- Maximum torque 2.5Nm!
- Sold individually.
$7.00
- Lightweight replacement titanium M6 barbed fitting from Racing Line.
- Constructed from 6Al-4V titanium alloy.
- Less than half the weight of standard steel barb fittings!
$8.00
- Replacement piston spring for Trialtech brake levers.
- Precision taper wound design for improved function and durability.
- Fits Sport or Carthy brake levers.
- Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech.
- Lightweight, durable material.
- 5mm external diameter.
- Available in Black, Blue, Green, Red, White, Yellow and Clear.
- Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose.
- Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech.
- Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster.
- Fits standard M5 brake clamp bolts.
- Available in anodized black only.
- Supplied as a pair.
$8.00
- Replacement steel crank bolts from TruVativ.
- Fitted for an 8mm allen key.
- Includes steel washers.
- Available in M12 and M15 sizes.
- Sold as a pair.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes.
- Compatible with all brake clamps that require the traditional Magura cylinder washer.
- Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting.
- Aluminum construction makes the washers more durable than standard plastic washers.
- Anodized gloss black finish.
- Sold as a pair (for one brake).
$10.00
Derailleur hangers snap pretty regularly when you get into trials. You might hit it on a ledge or when you jump from obstacle to obstacle. It's always advised to have a spare hanger on hand, so you can get back on your bike in 5 minutes.
- Break a derailleur hanger on your Echo frame? These are what you need.
- Compatible with all vertical dropout 2005-2010 Echo, Zoo!, Adamant, Czar, and GU frames.
- Supplied with mounting bolt.
$10.00
- Lightweight foam grips from Echo.
- Tough, durable foam compound feels a bit more like a rubber grip than other foam grips.
- Foam construction is comfortable on the hands with or without gloves.
- Subtle matte black Echo logos on each grip.
- Sold as a pair.
- Bar end plugs NOT included.
$10.00
- Replacement brass barrel nut for Hope trials lever blades.
- Features a nylon plug to prevent the reach adjust from unscrewing during use.
- Constructed from brass.
- Compatible with Hope Race and Trial Zone levers.
$10.00
- Velcro fastening for quick and easy fitting.
- Made from neoprene, highly rip and tear resistant, the best material for the job.
- Length and depth designed specifically to fit Inspired chainstays perfectly but will also fit other frames.
- Double stitching at each end of the velrco strips ensures maximum life.
- Large and durable screen printed XL Inspired logo.
- 185mm length.
- Available in black with white or fluro yellow logo.
$10.00 - $13.00
- The Jitsie rubber grips offer great performance for even the most demanding riders.
- Durable single layer rubber compound with grippy knurled design for optimal grip.
- Jitsie print detail on end of each grip.
- Rubber ends help protect bar from damage.
Please Note: the clear rubber compound is softer and a bit lighter than the other colors, so if you're looking for comfort or are concerned with weight, we recommend the clear grips.
$10.00
$15.00
33% Off
- Replacement threaded top cap for Trialtech forks.
- Fits Trialtech Sport 20" and 26" forks.
- CNC machined from 6061 Aluminum.
- Available in anodized black only.
$10.00 - $1,000.00
- Finding the perfect gift can be tough, which is exactly why we offer gift cards.
- Great presents for relatives and friends, and a fantastic way to thank someone special.
- Always the right size and color!
- We can mail the card to you or the intended recipient. Just enter the appropriate address in the "Ship To" field during checkout.
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners.
- Strong tension to keep the chain tight and the tensioner from bouncing.
- Ideal if your spring has broken or become worn out.
- Sold singly.
Page 1 of 5
Next page