Filter By:
- Complete Trials Bikes (12)
- Frames (12)
- Forks (6)
- Drivetrain (58)
- Steering (27)
- Braking (68)
- Wheels (59)
- Clothing and Protection (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Trials Bikes & Gear
$5.00 - $6.00
- Rim strips from Trialtech.
- Heavy duty plastic rim tape is tough yet flexible.
- Strong heat bonded join with a large enough hole for all types of valve.
- Matte finish on one side and gloss on the other.
- Very tough, durable, and also waterproof.
- Available in Black or White.
- Front width 25mm, rear width 40mm.
- 24" width 35mm.
$5.00
- Miscellaneous Webcyclery labor charge.
- To be used by Webcyclery staff only, unless directed.
$5.00
$10.00
50% Off
- Replacement derailleur hangers for Woodman frames.
- Supplied with mounting bolt.
$5.00
$10.00
50% Off
- Replacement derailleur hangers for Zhi frames.
- Supplied without mounting bolt.
$6.00 - $8.99
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Presta valve is the longer, skinnier valve than the standard schrader.
$6.00 - $9.50
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Schrader valve is the same type of valve you would find on your car.
$6.00
- Replacement set of rotor bolts from Avid/Sram.
- Constructed from durable steel.
- Head fitted for a T25 Torx key.
- Supplied with loctite applied to prevent loosening.
- Sold as a set of 6 for one rotor.
$6.00
- Durable rim strips from Echo.
- Made from strong yet light plastic.
- Heat-bonded join.
- Available in white only with printed Echo logos.
Widths:
- 28 mm for all front wheel sizes (20", 24", 26")
- 32mm for 24" rear
- 35mm for 19" and 26" rear.
Please Note: width can vary a few mm from strip to strip.
$6.00
- Replacement TPA Bushings from Racing Line.
- Bushings sit on both sides of TPA wheel to hold it in place.
- Fits 2005-2010 Magura HS33 and Racing Line levers.
- Sold as a pair (for one brake).
$6.00
- Replacement superlight titanium Racing Line compression sleeve nut, also known as a shroud nut.
- Compatible with Magura HS33 2005-2010 levers and Magura slave cylinders
- Less than half the weight of standard steel compression nuts.
$6.00
- Quality bleed hose for hydraulic rim brakes.
- M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes.
- Can be used as an inlet or outlet hose.
- Supplied with Trialtech barbed connector fitted to a 23cm long hose.
- Ideal for use with Trialtech bleed syringes.
- Sold individually.
$7.00 - $9.00
- Superlight rim tape from Jitsie.
- Extremely light nylon material is still strong enough to resist tearing and bubbling.
- Significantly lighter than competitor's rim tapes.
- Strong heat bonded join with hole for all valve types.
- Silver/grey with printed Jitsie logos on one side and plain blue finish on the other.
- 30mm front width, 42mm rear width.
$7.00
- Racing Line grease.
- Specially formulated for use with o-rings on Racing Line brakes.
- Helps keep o-rings on hydraulic rim brakes sealed and lubricated.
- Also works great on bolts and other items requiring grease.
- 3g.
$7.00
- Replacement o-rings for Racing Line levers.
- If your lever is starting to leak, new o-ring seals can often give it new life.
- Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.
$7.00
- Tar is the long-used method of improving rim brake performance without grinding.
- To apply, simply spin your wheel and lightly scrub some tar onto the braking surface.
- Only a small amount is needed for each application.
- Can be used with both smooth and ground rims.
- For use with rim brakes only.
- Block of tar measures approximately 3cm x 3cm x 5mm
- Sold singly
$7.00 - $8.00
- Lightweight replacement titanium pivot bolt for Racing Line levers.
- CNC-machined from titanium.
- Compatible with Racing Line FL001 and Nano 28 levers and Freno levers.
- T25 Torx fitting on both ends resists rounding out better than allen fittings.
- Available in anodized black or gold.
- Maximum torque 2.5Nm!
- Sold individually.
$7.00
- Lightweight replacement titanium M6 barbed fitting from Racing Line.
- Constructed from 6Al-4V titanium alloy.
- Less than half the weight of standard steel barb fittings!
$8.00
- Replacement piston spring for Trialtech brake levers.
- Precision taper wound design for improved function and durability.
- Fits Sport or Carthy brake levers.
- Sold singly.
$8.00
- Top quality replacement rim brake line from Trialtech.
- Lightweight, durable material.
- 5mm external diameter.
- Available in Black, Blue, Green, Red, White, Yellow and Clear.
- Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose.
- Supplied cut to length in 1 meter increments.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech.
- Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster.
- Fits standard M5 brake clamp bolts.
- Available in anodized black only.
- Supplied as a pair.
$8.00
- Replacement steel crank bolts from TruVativ.
- Fitted for an 8mm allen key.
- Includes steel washers.
- Available in M12 and M15 sizes.
- Sold as a pair.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes.
- Compatible with all brake clamps that require the traditional Magura cylinder washer.
- Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting.
- Aluminum construction makes the washers more durable than standard plastic washers.
- Anodized gloss black finish.
- Sold as a pair (for one brake).
$10.00
Derailleur hangers snap pretty regularly when you get into trials. You might hit it on a ledge or when you jump from obstacle to obstacle. It's always advised to have a spare hanger on hand, so you can get back on your bike in 5 minutes.
- Break a derailleur hanger on your Echo frame? These are what you need.
- Compatible with all vertical dropout 2005-2010 Echo, Zoo!, Adamant, Czar, and GU frames.
- Supplied with mounting bolt.
$10.00
- Lightweight foam grips from Echo.
- Tough, durable foam compound feels a bit more like a rubber grip than other foam grips.
- Foam construction is comfortable on the hands with or without gloves.
- Subtle matte black Echo logos on each grip.
- Sold as a pair.
- Bar end plugs NOT included.
$10.00
- Replacement brass barrel nut for Hope trials lever blades.
- Features a nylon plug to prevent the reach adjust from unscrewing during use.
- Constructed from brass.
- Compatible with Hope Race and Trial Zone levers.
$10.00
- Velcro fastening for quick and easy fitting.
- Made from neoprene, highly rip and tear resistant, the best material for the job.
- Length and depth designed specifically to fit Inspired chainstays perfectly but will also fit other frames.
- Double stitching at each end of the velrco strips ensures maximum life.
- Large and durable screen printed XL Inspired logo.
- 185mm length.
- Available in black with white or fluro yellow logo.
$10.00 - $13.00
- The Jitsie rubber grips offer great performance for even the most demanding riders.
- Durable single layer rubber compound with grippy knurled design for optimal grip.
- Jitsie print detail on end of each grip.
- Rubber ends help protect bar from damage.
Please Note: the clear rubber compound is softer and a bit lighter than the other colors, so if you're looking for comfort or are concerned with weight, we recommend the clear grips.
$10.00
$15.00
33% Off
- Replacement threaded top cap for Trialtech forks.
- Fits Trialtech Sport 20" and 26" forks.
- CNC machined from 6061 Aluminum.
- Available in anodized black only.
$10.00 - $1,000.00
- Finding the perfect gift can be tough, which is exactly why we offer gift cards.
- Great presents for relatives and friends, and a fantastic way to thank someone special.
- Always the right size and color!
- We can mail the card to you or the intended recipient. Just enter the appropriate address in the "Ship To" field during checkout.
$11.00
- Replacement spring for Crewkerz and Clean chain tensioners.
- Strong tension to keep the chain tight and the tensioner from bouncing.
- Ideal if your spring has broken or become worn out.
- Sold singly.