Your Search: "exp"

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.

Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.

M15/M26 Alloy GXP Crank Arm Bolt Kit

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

- Anything Cradle Straps are the perfect width for Salsa's Anything Cradle, but can also be used to strap stuff down on racks or wherever the heck you want to strap stuff. - They cinch tight but easily release tension with a push of the buckle. - Carry a couple with you for your planned or unplanned strapping needs. - Materials - 25mm nylon webbing, Duraflex hardware.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.

Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down.

SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank — spindle length and diameter remain the same. - BB Shell Width (mm): 104.5 mm , 107 mm

Replacement crank arm for X5 GXP

The big news from Donnelly is the upcoming EMP gravel tire, which pulls its name from the airport code for Emporia, Kansas, home of a kinda popular gravel race that crushes souls every year. The tire is a departure from their usual tread design, getting a tighter tread block pattern without a well-defined center strip like most all of their other tires. It’s still designed to roll fast, which is key if you’re racing any long distance gravel bike event, but with bigger side knobs to handle more aggressive cornering. - Smooth-rolling center knobs and aggressive shoulder lugs - Soft rubber compound for extra grip and shock absorption - Integrated puncture protection belt under the tread - Tire Intended Use: Gravel - Labeled Size: 700 x 45 - Tire Bead: Folding - Tire Diameter: 700c - Tire Type: Clincher - Weight (oz): 21.7 - TPI: 60 - Flat Protection: Tread

It has the proven SRAM shifter technology and authoritative lever feel, but the EX1 shifter has been engineered to deliver one perfectly accurate shift at a time, alleviating double shifting and over shifting. Single precise gear changes increase battery life and help to decrease component wear. - X-ACTUATION for precise and dependable performance - Single shifts reduce over shifting and increase battery performance - Weight: 122 grams - Speeds: 1 x 8-speeds - Recommended Group: EX1

Replacement crank arm for GX Eagle GXP

- The Exp Series Anything Cradle Front Pouch adds easy accessibility to the kinds of gear you rely on throughout the day on a bikepacking adventure. - Fully welded-in construction for day in, day out abuse, and a buckle attachment design that fully integrates with Salsa's EXP Series Anything Cradle and EXP Series Dry Bag. - Constructed from 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, Duraflex hardware, #5 YKK waterproof zipper, nylon webbing. - Dimensions: Length 250mm, Width 150mm, Height 50mm - Extremely weather resistant welded-in design. - Weight - 160g, Volume- 1.7L

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

The MXP is a cyclocross tire featuring an intermediate tread pattern to create an excellent all-conditions tire. The MXP is named after the airport code for Milan, Italy, a World Cup venue that calls for an all-conditions tire. The name is also a homage to Clement’s Italian pedigree. The tread is an updated version of the classic Grifo profile first developed by Clement decades ago. Some of the changes include cuts in the central chevrons to allow the tread to flex and more aggressive side knobs with a shape inspired by a soccer cleat. The MXP is designed for a wide variety of conditions and variable surfaces. It excels on grass, loose dirt, sand, moderate mud, hard pack, snow and pavement. If you could only have one cyclocross tire, this is the one to have. Size: 700 x 33mm Tread: Center chevrons and staggered side knobs for all-conditions. Soft rubber compound for extra grip and shock absorbtion.

The big news from Donnelly is the upcoming EMP gravel tire, which pulls its name from the airport code for Emporia, Kansas, home of a kinda popular gravel race that crushes souls every year. The tire is a departure from their usual tread design, getting a tighter tread block pattern without a well-defined center strip like most all of their other tires. It’s still designed to roll fast, which is key if you’re racing any long distance gravel bike event, but with bigger side knobs to handle more aggressive cornering. - Smooth-rolling center knobs and aggressive shoulder lugs - Soft rubber compound for extra grip and shock absorption - Integrated puncture protection belt under the tread - Tire Intended Use: Gravel - Labeled Size: 650B x 47 - Tire Bead: Folding - Tire Diameter: 650B - Tire Type: Tubeless Ready Clincher - Weight: 460 - Weight (oz): 16.2

The big news from Donnelly is the upcoming EMP gravel tire, which pulls its name from the airport code for Emporia, Kansas, home of a kinda popular gravel race that crushes souls every year. The tire is a departure from their usual tread design, getting a tighter tread block pattern without a well-defined center strip like most all of their other tires. It’s still designed to roll fast, which is key if you’re racing any long distance gravel bike event, but with bigger side knobs to handle more aggressive cornering. - Smooth-rolling center knobs and aggressive shoulder lugs - Soft rubber compound for extra grip and shock absorption - Integrated puncture protection belt under the tread - Tire Intended Use: Gravel - Labeled Size: 700 x 38 - Tire Bead: Folding - Tire Diameter: 700c - Tire Type: Tubeless Ready Clincher - Weight: 484 - Weight (oz): 17 - Flat Protection: Tread

The MXP combines a unique tread pattern with our innovative tubeless ready design to provide an amazing all-conditions tubeless ready tire. It excels on grass, loose dirt, sand, moderate mud, hard pack and pavement. The MXP is named after the airport code for Milan, Italy, site of a World Cup cyclocross venue that calls for an all-conditions tire. The tread features a classic profile with several modern updates. Precise grooves in the central chevrons allow the tread to flex and more aggressive side knobs offer traction and control beyond what you might expect. If you could only have one cyclocross tire in your quiver, the MXP is the one to have. Size: - 700 x 33mm Weight: - 446 grams Type: - Tubeless Ready Part #: - D10042 Product Features: - Center chevrons and staggered side knobs for all-conditions. - Side knobs offer superior cornering. - Soft rubber compound provides extra grip and shock absorption. - Tubeless-ready design mounts easily to most tubeless ready rims. - Tubeless casing is reinforced for wear, features an Aramid bead. - Precision design creates a straight tire with no variances in size or alignment. - Can be used tubeless or with a tube.

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and a rear water bottle holder that lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb Added Features: - Water bottle holder Shoulder strap - Carrying handle - Elastic top bungees - 3M reflective strip - Safety light clip - Optional rain cover

The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2

- Salsa's EXP Series Fat HT Framepacks are bikepacking and touring frame bags that create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. - The EXP Series Fat Framepacks feature wider dimensions that are perfect for bulky cold weather clothing, or multi-day off-the-grid supplies. - Built with extremely durable fabric and zippers to see you through many miles, and many adventures. - Designed to fit Salsa hardtail frames perfectly. - Constructed from 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 weather-resistant YKK Zippers, Duraflex Hardware. - Cut and sewn with welded-in-in zippers. - Weather-resistant with fully welded-in #10 YKK weather-resistant zippers. - Internal hook and loop divider for separating gear and managing storage. - Exit port along toptube for use with water bladder or lights. - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

- The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. - Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics. - Roll type closure and air purging valve that allows for managing overall volume. - Stretch cord storage on top. - Durable 1000D material strategically placed in high wear areas. - Weight: 380g, Volume: 6-14L

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier, and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing

Replacement crank arm for Descendant Carbon Eagle GXP

The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.