Rims

- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight. - Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley. - Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!). - Custom butted center section adds strength around the spoke holes for improved durability. - 31mm wide profile gives a good balance of low weight and tire performance. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in sandblast black anodized finish with Carthy Signature laser etched logos. - Available in 28h or 32h spoke drilling. - For use with rim or disc brakes.

- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- The updated Inspired Pro V2 rim offers excellent strength and value for street trials. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Un-drilled double wall construction is very stiff and strong, ideal for street riding. - 36mm wide profile gives good anti-roll performance even at low tire pressures. - For use with disc brakes only. - Available in gloss black anodized finish with white Inspired graphics. - 32h spoke drilling only.

- The Inspired Pro V2 rim offers excellent strength and value. - Updated V2 version tested and proven by John Langlois. - Double wall angular profile for increased strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 36mm width gives good anti-roll performance even at low tire pressures. - Available in gloss black anodized finish with white 'Inspired' graphics. - For use with disc brakes only. - 32h spoke drilling only. - Not tubeless compatible.

- Designed for street riding use, the Team rim offers an excellent strength to weight ratio. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Double wall construction offers good strength and stiffness. - 20mm holes drilled in the rim help to reduce weight. - 36mm wide profile helps to prevent tire roll when compared to similar rims available. - Matte white powder coat finish with black logos. - Available in 32h spoke drilling only.

- Lightweight 24" street trials rim from Inspired based off the Spank Spike rims. - Tested and developed with team riders Ali C, John Langlois and Leo Nobile. - Specially designed double wall section and high quality aluminum provide optimal strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 34mm wide profile gives good anti-roll performance even at low tire pressures. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in satin black anodized finish with Inspired laser etched logos. - For use with disc brakes only. - 32h spoke drilling only.

- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.

- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.

- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.

- Echo's new lightweight front 24" rim as seen on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Durable double wall rim from Inspired. - As fitted to the Inspired Flow bikes. - Double wall, high quality aluminum construction for maximum strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 32mm wide profile. - Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes. - Black anodized finish with laser etched Inspired logo. - 32h spoke drilling only.