116mm Rear Hubs

- Trialtech's Sport Lite rear non-disc hub is lightweight but tough and has been designed to perform at the highest level. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - Custom design, CNC machined 7075 aluminum shell and hollow axle. - Serrated axle ends and bolt washers help keep the bolts tight and the hub in place. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Oversized 10mm axle bolt on the drive side keeps the hub secure in the dropout. - Matte black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Supplied with high tensile, zinc plated cr-moly bolts and custom, low profile aluminum washers. - 3mm removable washer inserts allow the hub to be used with or without snail cams. - 32h spoke drilling.

- Strong and affordable 116mm disc hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell. - Standard 6-bolt disc mount is compatible with all trials rotors. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.

- Jitsie's superlight HS 116mm hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.

- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.