Hubs

- High quality, tough front non-disc hub for most street and trials bikes. - 100mm spacing, to fit all modern front forks. - Fully sealed cartridge bearings keep out mud and water and offer silky smooth running no matter what conditions you ride in. - Serrated axle ends and bolt washers help keep the bolts tight and the hub in place. - Cr-moly hollow 10mm axle with internal threads to take allen key bolts (included) or a traditional quick release skewer (available separately) for easy removal. - CNC machined aluminum shell. - 32h drilling only. - Available in Gloss Black only.

- The classic Echo TR front non-disc hub. - Lightweight 10mm 7075 T6 aluminum axle. - Hub shell machined from durable 2014 aluminum. - Sealed bearings provide smooth and reliable operation in all conditions. - Supplied with durable steel axle bolts. - Spaced at 100mm to fit nearly all trials forks. - Anodized black finish with laser-etched logos. - Available in 32 hole drilling only. Please Note: Echo hubs use 10mm axles which may not fit in some forks that use 9mm dropouts (Trialtech for example).

- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.

- The classic Echo TR front disc hub. - Lightweight 10mm 7075 T6 aluminum axle. - Hub shell machined from durable 2014 aluminum. - Sealed bearings provide smooth and reliable operation in all conditions. - International Standard 6-bolt rotor mounting pattern. - Supplied with steel axle bolts but can also be used with a quick release skewer. - Spaced at 100mm to fit nearly all trials forks. - Anodized black finish with laser-etched logos. - Available in 32 hole drilling only. Please Note: Echo hubs use 10mm axles which may not fit in some forks that use 9mm dropouts (Trialtech for example).

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Strong and affordable 116mm hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- Strong and affordable 135mm hub from Jitsie. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell tapers in the middle to shed unnecessary weight. - Precision threaded (1.37" x 24 tpi) section to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - 135mm spacing fits most 24"/26" frames. - Spaced for use with snail cams (129mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 135mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- The Crewkerz WAW front hub as found on their Jealousy complete bikes. - Thru-axle design provides additional stiffness and strength over traditional bolt-on hubs. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - CNC-machined 7075 aluminum shell and hollow axle for a good blend of strength and weight. - Matte black anodized finish with laser etched WAW logos. - Supplied with matching Crewkerz 9mm thru-axle. - Only compatible with Crewkerz thru-axle forks. - Non-disc only. - 32h spoke drilling.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Lightweight but durable disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Standard 6-bolt disc mount. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Strong and affordable 116mm disc hub from Jitsie. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - CNC machined aluminum hubshell. - Standard 6-bolt disc mount is compatible with all trials rotors. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame. - Supplied with steel bolts. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers. - Black anodized finish with Jitsie logos. - 32h spoke drilling only.

- Trialtech's Sport Lite rear non-disc hub is lightweight but tough and has been designed to perform at the highest level. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - Custom design, CNC machined 7075 aluminum shell and hollow axle. - Serrated axle ends and bolt washers help keep the bolts tight and the hub in place. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Oversized 10mm axle bolt on the drive side keeps the hub secure in the dropout. - Matte black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Supplied with high tensile, zinc plated cr-moly bolts and custom, low profile aluminum washers. - 3mm removable washer inserts allow the hub to be used with or without snail cams. - 32h spoke drilling.

- The Crewkerz WAW front hub as found on their Jealousy complete bikes. - Thru-axle design provides additional stiffness and strength over traditional bolt-on hubs. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - CNC-machined 7075 aluminum shell and hollow axle for a good blend of strength and weight. - 6-bolt International Standard rotor mount. - Matte black anodized finish with laser etched WAW logos. - Supplied with matching Crewkerz 9mm thru-axle. - Only compatible with Crewkerz thru-axle forks. - 32h spoke drilling.

- 15mm thru-axle disc hub from Inspired. - As spec'd on the Fourplay, Hex and Arcade Pro bikes. - CNC machined 7075 aluminum shell. - Widely spaced, large diameter flanges to help build a stronger wheel. - 100mm spacing, to fit all modern front forks. - Fully sealed cartridge bearings for smooth operation. - 15mm bolt through axle only (axle not included). - 6 bolt IS (International Standard) bolt pattern. - Available in gloss black only with laser etched Inspired logo. - 32h spoke drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Ultralight non-disc front hub from Jitsie! - Developed and tested with 10-time World Champion Dani Comas. - CNC-machined from high quality 7075 aluminum. - Uses a custom designed, CNC machined shell that tapers from one end to the other to minimize weight. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit all modern forks. - Hollow alloy axle keeps weight to a minimum. - Supplied with steel bolts and lightweight alloy spacers. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Available in anodized black or red with laser-etched Jitsie logos. - 28h spoke drilling only

- Designed with input from multiple time World Champion Dani Comas. - 135mm spacing fits most 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (129mm + 3mm axle spacing for each snail cam). - Black or Red anodized finish with Jitsie laser etched logos. - Manufactured in Belgium. - 32h spoke drilling only.

- The Trialtech Sport Lite non-disc front hub incorporates the perfect mix of weight, functionality and design. - Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in. - Custom design, CNC machined 7075 aluminum shell and hollow axle. - Strong, International Standard 6-Bolt disc fitting. - Hollow disc mount base to reduce weight and increase strength over traditional designs. - Serrated axle ends and bolt washers help keep the bolts tight and the hub in place. - Matte black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos. - Supplied with high tensile, zinc plated M6 x 30mm cr-moly bolts and custom, low profile aluminum washers. - 100mm spacing to fit nearly all 20", 24" and 26" forks. - Available in 28h and 32h spoke drillings.

- Jitsie's superlight HS 116mm hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only

- The Crewkerz WAW rear hub as found on their Jealousy complete bikes. - Thru-axle design provides additional stiffness and strength over traditional bolt-on hubs. - Fully sealed cartridge bearings offer smooth and reliable running no matter the conditions. - Splined section is compatible with Shimano HG standard cogs such as Crewkerz, Trialtech, Bonz, etc. - CNC-machined 7075 aluminum shell and hollow axle for a good blend of strength and weight. - Matte black anodized finish with laser etched WAW logos. - Supplied with cog lockring and matching Crewkerz 12mm thru-axle. - Compatible only with Crewkerz thru-axle frames. - Non-disc only. - 32h spoke drilling.

- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.

- Hope's Pro 4 Trials/Singlespeed hub has become the rear hub of choice for many street trials riders the world over. - Machined from forged 2014 T6 aluminum billet. - 4-pawl ratchet mechanism gives 88 engagement points which ensures a quick, solid pedaling response. - 6-speed steel cassette body (spacers included to convert to single speed) increases durability and makes it harder for cogs to dig into it under trials forces. - 6 bolt International Standard disc mount. - Sealed stainless steel cartridge bearings. - 10mm steel axle bolts (fitted for 8mm allen key) and serrated washers included. - Conversions available for QR and 12mm axles. - Compatible with 135mm spaced frames. - Not supplied with spacer lockring. - Available in 32 and 36 hole drillings in black, red, orange, blue, purple, and silver.