Filter By:
Cranks

$315.00
- Custom-designed high quality crank/bottom bracket system from Crewkerz.
- Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight.
- Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength.
- Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz.
- Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool.
- Machined pockets in back of cranks keeps weight down.
- Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank.
- Sealed bearings run smooth and keep out dirt and grit.
- Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets.
- Pressfit BB cups are compatible with Crewkerz and Clean frames only.
- Supplied with an 18t half bashring that can be set up for left or right foot forward riders.
- The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times.
- Available in anodized black finish.
- Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring.
Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty.

$85.00 - $95.00
The Echo splined cranks are great for those looking for a tough, robust cranks that wont slip. Bare in mind that Echo use their own spline system so parts from other brands won't work.
- Echo's popular TR ISIS cranks in a splined version.
- Forged from 6061 T6 aluminum making them strong and stiff.
- Large slot machined into the front of the cranks reduces weight.
- Splined crank/freewheel interface allows for easy installation and removal of freewheels. No more fussing with huge pry-bars to remove stuck threaded freewheels!
- Designed to work with Echo style pressfit bottom brackets.
- Special "top hat" bb spacers (supplied with bb or sold separately) keep the freewheel secured on the splines.
- A freewheel spacer is supplied in case you want to run them without a bashring.
- If a bashring is used, it must have a base width of 4mm.
- Compatible only with Echo splined freewheels.
- Available in 160mm and 170mm.
- Anodized black with laser-etched Echo logos.
Please Note: The Echo splined crank/freewheel system is only compatible with Echo style pressfit ISIS bottom brackets found on Echo, Zoo, Czar, and GU frames as well as others.

$65.00
- Great value forged cranks from Jitsie.
- Constructed from forged 7075 T6 aluminum for optimal stiffness.
- Material removed from the back of the cranks saves weight while maintaining strength in key areas.
- 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs.
- Matte anodized black finish with Jitsie logos.
- Compatible with all ISIS bottom brackets.
- Available in 160mm, 165mm, 170mm, and 175mm lengths.
Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel with maximum internal thread diameter 33.80mm (NOT 1.375") must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

$60.00
- ISIS cranks forged from high quality 6061 aluminum alloy.
- Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket.
- Wide threaded section allows a bashguard to be used if desired.
- Super stiff and strong yet still light enough for competition use.
- Tough anodized matt finish, with laser etched Trialtech logos.
- 165mm and 175mm lengths available.
- Black finish only.
Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.

$150.00
- Superlight, yet stiff and strong, the Trialtech SL cranks set a new standard in low-weight, high-performance products.
- Forged from high quality 7050 aluminium alloy.
- Used and tested by Trialtech team riders Kenny Belaey, Thomas Remvik Aasen, Rick Koekoek, Neil Tunnicliffe and Stan Shaw.
- Fits all ISIS bottom brackets.
- Threaded right-hand crank arm to accept a front freewheel or screw-on fixed sprocket.
- Wide threaded section allows a bashguard to be used in addition to a freewheel/sprocket.
- Multi-stage forging allows a design that is super light yet stiff and strong.
- Tough anodized matt silver finish with a stylish and distinctive black SL logo.
- 32.5mm offset provides plenty of clearance.
- Available in 165mm, 170mm and 175mm lengths.

$200.00
- Superlight splined crankset from Trialtech including freewheel, bashring and 7075 crank bolts.
- One of the most cost-effective splined cranksets available.
- Compatible with all standard M15 ISIS bottom brackets.
- Splined 108.9 freewheel can be removed using standard allen/hex key multi tool. No more fooling with vices and pry bars trying to get stuck freewheels off!
- Splined 7075 bashring can be set up for left or right foot forward riders and is always held at the correct angle by the splines.
- Multi-stage forging allows a design that is super light yet stiff and strong.
- Trialtech splined freewheel provides 108 engagement points per revolution with a proven 9 pawl design.
- 32.5mm offset provides plenty of clearance.
- Tough sandblast black anodized finish with distinctive Sport Lite laser logos.
- Additional crank bolt spacers recommended when using titanium bottom brackets.
- Available in 165mm, 170mm and 175mm lengths.
- Full crankset includes crank arms, freewheel, freewheel lockring, half bashring, and M15 crank bolts.
Page 1 of 1